Thanks for sharing... What type of printer is needed for sublimation?
@akib5325 ай бұрын
thickness of the aluminum piece is 1mm
@user-mh7pm4eo2m9 ай бұрын
Hey! Do you have any tutorial on everything? Like how to print the sublimation paper until the end where magnets are putted? I appreciate it. Your videos are great!
@James_Baggott11 ай бұрын
Can you theoretically print on both sides? Walgreens, Shutterfly, etc. don't seem to offer that as an option and that's what I need. Also, when you talked about magnetizing, you can actually magnetize the whole plate? When I went to Walgreens, I noticed that their "metal" photos didn't stick to my neodymium magnets so I'd love to figure out how to magnetize them. Thanks!
@toooldtobegaming886811 ай бұрын
Any time you reheat a sublimated product, the image fades. Since you would have to heat the plate twice, your image quality would suffer quite a bit. I would not recommend it. These are just metal signs, not aluminum, so I'm able to stick a magnet to the wall, then the plate sticks to the magnet.
@James_Baggott11 ай бұрын
@toooldtobegaming8868 I'm happy to hear about the magnet working. I'm just trying to print simple calendar days with no real images. I'd take the risk but nobody seems to do it :(
@tyramitchell7999 Жыл бұрын
What kind of press is that?
@toooldtobegaming8868 Жыл бұрын
Hix 25 Twin
@selder03 Жыл бұрын
I see the twmp was at 400. What about time? And pressure?
@ruskiryan2398 Жыл бұрын
Where can I find that picture to download ?
@toooldtobegaming8868 Жыл бұрын
That was a scan of a vintage post card. Unfortunately, I'm unable to find it now.
@TheGaryNinja Жыл бұрын
Thanks for sharing your knowledge. Where do you buy the aluminum sheets from? Are they pre-treated already and ready to transfer straight on to it?
@toooldtobegaming8868 Жыл бұрын
These are from JDS Industries. SKU: UN5955 11" x 14" Unisub White Steel Panel with Radius Corners
@fun2collect Жыл бұрын
Thank you so much for your in depth tutorial!! Everything is so clear and well explained. Thank you thank you!
@jenniferlove4047 Жыл бұрын
Where can I find the picture you used? I love this picture!
@toooldtobegaming8868 Жыл бұрын
It was a scan from a vintage post card. I'm not sure I can find it.
@beckywilliams9953 Жыл бұрын
Where can you get the steel blanks from or aluminum blanks and dome? Could you demonstrate how you put magnets on them?
@thehindnews9025 Жыл бұрын
Sir , what's the name of your printer
@toooldtobegaming8868 Жыл бұрын
Epson ET-15000
@Dontunechi Жыл бұрын
what is the thickness of the aluminum sheet you used??
@toooldtobegaming8868 Жыл бұрын
The tin is a little under 1mm thick
@giokaios Жыл бұрын
Hey great video, if I don't have a sublimation printer can I just order it from somewhere with my custom designs?
@toooldtobegaming8868 Жыл бұрын
Hustle Ninjas did a great walkthrough of a place I like to use kzbin.info/www/bejne/gp6ThnWVjKuUn80
@rxgaming3105 Жыл бұрын
sir please ask me how to order this machine
@cabcabs3278 Жыл бұрын
Great video! What printer are you using?
@toooldtobegaming8868 Жыл бұрын
Epson ET 15000
@cabcabs3278 Жыл бұрын
@@toooldtobegaming8868 Thanks! I use the f170 but hate the size limitations. What ink do you use and have you ever had any issues with color correctness?
@toooldtobegaming8868 Жыл бұрын
@cabcabs I use Cosmos Ink, and use their color profiles. Some of the colors can be a little extra vivid at times, but constantly looks pretty great.
@cabcabs3278 Жыл бұрын
@@toooldtobegaming8868 Thank you!
@jonathanmcrae5308 Жыл бұрын
where do you get the blank tins
@cabcabs3278 Жыл бұрын
Coastal business supplies.
@WhiteCoatGamer Жыл бұрын
anyway you'd be willing to share you sensor panel template?
@toooldtobegaming8868 Жыл бұрын
I would love to, not sure how to though. It's mostly the Gadgets skin from here github.com/SilverAzide/Gadgets
@lisaricardo9996 Жыл бұрын
𝓟Ř𝔬𝓂𝔬𝐒ϻ
@tr1ksh0t88 Жыл бұрын
your case says 60C GPU on idle? Might wanna remove the GPU from vertical position lol
@toooldtobegaming8868 Жыл бұрын
I was going back and forth to it for rendering. It runs 45c idle most of the time.
@Sladde81 Жыл бұрын
whats the approx cost on the tower
@toooldtobegaming8868 Жыл бұрын
In the 3k range I think.
@rtbgains6563 Жыл бұрын
I love the panel you added! looks sharp!
@DevOpsDingle Жыл бұрын
the hyte y60 has a lcd panel???????
@toooldtobegaming8868 Жыл бұрын
No. I added it. 12.6 VSDISPLAY
@soggycereal3396 Жыл бұрын
yo wtf thats actually cool asf
@RandomJedi Жыл бұрын
Ahh, so I see you sold a kidney
@Matson27 Жыл бұрын
What machine are u using?
@toooldtobegaming8868 Жыл бұрын
My heat press is a Hix 25 Twin.
@AJHA174 Жыл бұрын
It looks fantastic... What temperature have you set for printing?
@toooldtobegaming8868 Жыл бұрын
I think the press was 400F.
@jeremyfabrega28 Жыл бұрын
Out of curiosity, why do you press the panel upside down with the sublimation paper below the panel? Why dont you press it with the paper on top so the heat penetrates directly from the paper onto the panel? Ive seen this in many videos, just wanted to know the reason why many people do it this way...Thank you!!!
@toooldtobegaming8868 Жыл бұрын
I get more consistent results this way. I think it heats the metal more evenly. I tend to get light and dark spots the other way.
@TheBinklemNetwork2 жыл бұрын
subscribed for the name of the channel...
@yourmomma69092 жыл бұрын
Do you do coaching
@toooldtobegaming88682 жыл бұрын
I would really like to, but I have a Chiari Malformation, which is a fancy way of saying my brain is falling out of my head, which has made me less than reliable. It's the main reason I haven't made any more video's.
@yourmomma69092 жыл бұрын
@@toooldtobegaming8868 I am sorry to hear that hope you get better soon
@megapint85982 жыл бұрын
So sorry about your medical problem. A nightmare to live with I am sure. I came across your video because I am starting up a business where it would be better if I bought the coating myself and sprayed it on the metal I shaped myself as nobody sells blanks the dimensions and shape I am looking for. I was wondering if you might be able to guide me with specific phrases and products to Google for and buy. Like .. before aluminum is sprayed with the coating does it need to be prepped in any way and would you happen to know what this poly powder thing is called specifically. Sorry I am such a novice at this. Am watching a thousand KZbin videos trying to figure out what I need to do to start my business. Best of luck with your medical situation. I feel bad you're dealing with that.
@toooldtobegaming88682 жыл бұрын
@@megapint8598 I don't have a lot of info on the process, but I have watched several videos on it. Do a search for sublimation powder coating process, and it should be a good start. From what I have found out about it, spend a little extra upfront for your equipment, and it could save you a lot of money in materials later. Good luck on your new venture, and thank you for the kind words. Hopefully, I'll be back soon.
@megapint85982 жыл бұрын
@@toooldtobegaming8868 Thanks a million for your advice! I look forward to seeing you bounce back soon with the best of health :)
@bmoviebloodbath2 жыл бұрын
Excellent video! I don’t know anything really about these machines but I’m thinking of getting one. Can this machine also do T shirts? Do you need an inlet printer for the transfer? Any recommendation on the brand or model of the machine? Thanks in advance!
@lovely31bluprint2 жыл бұрын
This really looks great 👍
@steve576692982 жыл бұрын
Way cool!
@ckgw94612 жыл бұрын
I am getting a white area on the edge where the tape was on the metal sign, but not under each piece of tape. Can anyone help me as to what is causing the problem? I have ruined so many 10" and 11" signs. If anyone can help, I will love you forever!
@toooldtobegaming88682 жыл бұрын
Have you tried letting the sign cool for a while before removing the paper?
@selder032 жыл бұрын
Amazing results! Do you suggest a clear coat after?
@toooldtobegaming88682 жыл бұрын
Thank you. Clear coat hasn't been needed. They are pretty durable.
@gbuilds26672 жыл бұрын
What’s a good place to get the metal signs?
@toooldtobegaming88682 жыл бұрын
I'm using 11" x 14" Unisub White Steel Panel with Radius Corners from JDS Industries in this video. I recommend looking around locally for a small powder coating shop to partner with that can shoot poly coating. It will give you a lot more options on material, sizes, and shapes, plus it's always nice to toss business to your community.
@sheri84712 жыл бұрын
Why is my lamination curling up?????
@toooldtobegaming88682 жыл бұрын
Are you using the same laminate as I am? Also, try wiping the tile with alcohol before pressing. There may be something on the tile.
@sheri84712 жыл бұрын
is it better to place top down, not having much luck
@toooldtobegaming88682 жыл бұрын
It's best to place it face down with the paper under the sign. Be sure you didn't leave any protective film on the metal.
@2303batman2 жыл бұрын
Where can I buy these please??
@toooldtobegaming88682 жыл бұрын
Are you wanting to buy the blanks or the completed signs? I can help you either way
@2303batman2 жыл бұрын
@@toooldtobegaming8868 blanks please n thank you
@toooldtobegaming88682 жыл бұрын
@@2303batman JDS Industries The link I had to the ones I was using in this video doesn't work anymore, but they have a pretty large selection of sizes still. browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=2&jds-category1-desc=Sublimation+Materials+%26amp%3B+Supplies&jds-category2=125&jds-category2-desc=Sublimatable+Metal+and+Sheet+Stock
@2303batman2 жыл бұрын
@@toooldtobegaming8868 appreciate it‼️
@day2dayshorts5592 жыл бұрын
Nice
@krittle822 жыл бұрын
Can this be outside? Will it wash away
@chrislewis33222 жыл бұрын
Does the pic scratch at all?
@chrislewis33222 жыл бұрын
Also can you lift the printed part when its cold or does it have to be hot
@toooldtobegaming88682 жыл бұрын
@@chrislewis3322 The metal signs are typically powder coated with the poly coating, so it's pretty durable. I've had better success letting the metal cool a bit before lifting away from the paper. I've had some instances where the metal wasn't fully cooled, and I could see the metal lightening where it would have been darker if I would have left it alone a little longer.
@chrislewis33222 жыл бұрын
@@toooldtobegaming8868 Legend cheers
@dollyrocker402 жыл бұрын
what printing paper and ink do you use ? thanks
@toooldtobegaming88682 жыл бұрын
Koala paper and Cosmos ink. Both have worked very well for me.
@lynnwhite45892 жыл бұрын
At what temperature, please?
@toooldtobegaming88682 жыл бұрын
400F
@lynnwhite45892 жыл бұрын
@@toooldtobegaming8868 Thanks so much!
@ReneeWilliamsoriginalr2 жыл бұрын
What's laminate?
@toooldtobegaming88682 жыл бұрын
It's a poly coating that's typically used to protect paper. We open it up and apply it to tiles for sublimation
@lukastadeu35402 жыл бұрын
Qual o tipo da chapa de alumínio eu uso ? E qual a espessura da chapa devo usar . Ou se tem a chapa específico. Obrigado
@gauravsaini91392 жыл бұрын
How to stick it to the wall using magnet? Could you please explain that?
@toooldtobegaming88682 жыл бұрын
We use Cup Magnets and Command Strips. Stick the cup magnet to the wall with a command strip and put your picture on it. My son has several hung up in his room, and they never move.
@gauravsaini91392 жыл бұрын
@@toooldtobegaming8868 but how would aluminium sheet stick to magnets?
@toooldtobegaming88682 жыл бұрын
@@gauravsaini9139 These aren't aluminum. They're steel
@zbutcher3 жыл бұрын
Great demo - What size, model and MFG is your heat press. Have a crummy Chinese 16x24 that I'm looking to replace and dpin my research. Thanks!
@toooldtobegaming88683 жыл бұрын
It's the older model of this press. www.hixcorp.com/swingman25-twin
@zbutcher3 жыл бұрын
@@toooldtobegaming8868 Awesome - thanks for this info. And are you happy with it?
@toooldtobegaming88683 жыл бұрын
@@zbutcher Very happy with it. Their products and customer service are some of the best I have worked with.
@zbutcher2 жыл бұрын
@@toooldtobegaming8868 That's great to know - thanks for sharing!
@lbasouza3 жыл бұрын
man, could you just send me the metal plates to Brazil? I would pay the costs plus a percentage. If you can, call me on instagram @leonardoabreusz to negotiate.
@susierogers50543 жыл бұрын
Can you use 5ml laminate? I have a ton of that. Also can you use a circuit easy press? Love this idea
@toooldtobegaming88683 жыл бұрын
I'm sure you could with the 5ml. Just may need to press for 5 sec or so longer for the initial press to stick. The easy press should be ok. I haven't tried it personally, so I can't say for sure.
@anursewhosews3 жыл бұрын
What type of laminate are you using
@toooldtobegaming88683 жыл бұрын
These are just regular lamination pouches you can get at any office supply store.