BEst ever!

You are THE man on youtube. Excatly what I am looking for. Thank you!

I love your humor. The intro in this video with the "feel" is amazing.

Could not be better

Awesome build! By any chance, will this also fit a Walksnail VTX and camera?

Bought the frame, built the thing. It’s great. Took some time to adjust to the looks of it, but now I even like it) Had to glue down the camera mount, as I was racing it and it did not hold up on the two screws, the base just came off, and camera came off with it. Plus I think glueing it down with epoxy reduces jello. Thank you for the work, I really appreciate it.

Nice quad design and flies good. Flight time with different batteries? Insta sub. Didn't get it - is it ok to use full size(not naked) O3 air unit?(still viable or sacrifice a lot of agility; full O3 seems more durable and heat resistant)

very nice!!! where were those cool aquaducts? streetsville? theres some cool ones near millcreek and erin mills parkway that could be fun you you

Do you have Instagram or other social media?

Could you please try rcinpower 1804 its only like 12g so not too much heavier and its produces a lot of thrust. Also if you want the most performance for sub250 you should try 4inch toothpick with 2004 or the rcinpower 1804.

I want 1!

This is great, thank you. Have you seen projectfarm's comparison videos? You should show your tests and do some things like him. All the same, super awesome, thank you!

How do these compare to the gemfan 3525-3 ? Gonna build them on a 1504.5 3950kv.

Hey I just saw your frame on cnc drone and no wonder I believed you where playing planetside haha

I wonder how the smoox 1404 from rcinpower perform. It at least is a very silent motor and the 2750kv 6s seems super fast.

This was cool how short the video was and how accurate it was. After a hard crash the fc leds stopped working but the vtx and rtx both still had power and leds on those little boards were on. ESC motors beeped but the last fc beep wasnt happening. I figured it was the fc but i did that finger trick and holy shit that puppy was piping hot. Thanks for the good info!

This is exactly what I was looking for thank you! :D It is such an awesome build, I'm getting the frame to. I was just wondering how would this fly with gnb 530mah 6s & tattu 550mah 6s with the t-motor f1404 2900kv. And how would these compare to the rcinpower1404 2750kv for 6s? I'm also going to use the flywoo kit for the o3 =D

Thank you for this frame. Sadly it has to be imported expensive but it is worth it. Did my First run in my garden. Video on my channel. Could you share your pid tune?

I been running manual. I just thought about auto if its better to avoid noise. which i get alot around all these houses. but guess not lol

I have the same FC with MPU6000 and it's horrible too... So it seems that not a gyro in guilty.

Thanks for doing and sharing this testing! Cheers bud

i did build one my self and i would love to see the pid tune and filer settings on this one.

1:48 Blaze it... I want to build THIS, but adapted for Dual 21700 batteries... Will need to learn how to calculate how much bigger props, motors and so on I'll need... Should be 4"? Batteries are 140g, all up then <250

Awesome build, need to try these motors, I've also worked on different builds with the crux35 frame and my best til now is extending it to 4" props and have fun, this thing flies so well with BF 4.5 and no tune at all and is still sub250 😉👍 kzbin.info/www/bejne/mpOuqaZ3rsqfgs0 kzbin.info/www/bejne/lXXJmXiapbaqgpY

just take my money 💸

Dipole linear performed better than 2 dipole omni ?

So what is a good alternative for the old Jhemcu in the Scythe? I bought the Scythe frame with the baseplate for 25.5x25.5 AIO layout. Is the GHF745AIO-40A or 50A any good? Also looking at the Speedybee F745 35A 25.5X25.5 AIO but it is slightly bigger

How do you change goggle fps?

1:00 Did you 3d print the other propellers that you're comparing this propeller to? Materials used does matter after all. EDIT: OK, you recognize the issue. However, I'm surprised you bothered to do experiment without setting the materials and production method as a control.

I used a set of 1804 3022kv hyperlite motors for my 5 inch light build with the Hypetlite UL5. bi-blade props feel really good, in open air its just a little slower than a regular 5 inch, but in corners it handles much better because a lack of mass. Air resistance is a real issue, so I full throttle eject into straightaways and flatten out to reduce air drag. I was initially planning to use a 850mah 4S battery, but after testing a 3sHV I settled on a 750mah 3sHV, reducing the battery mass by %30, bringing the AUW to 197 grams wet. I think I could get a little more thrust with a bigger motor or lower KV same motor... But the build at is is fast AF and I get 7 mins of track time. (landing at 3.5)

huh I didn't expect the 2 and 3 blade results to cross over the way they did. I suspect this is actually due to motor/torque effects more than the props themselves. still useful data to consider though since we need to look at the big picture. too bad the emax avia 3" weren't in the mix.

Great test, although tbh I find very little difference in performance in flight using the motor output limit on higher kv motors...

You say 'switch transmission to manual'. I assume you mean in the transmission menu - switch channel mode to manual? I can't find anywhere else where this might apply...

Can I buy you a bunch of motors for you to test it please

Awesome video. Thank you so much for taking the time to making it. Keep it going!

I purchased a rush 30x30 stack listed as having an MPU6000 gyro and put it on a new build just to find that bit flew like shit no matter what I did with filters. took the fc off after a week of trying to figure shit out and realized the fc says on the bottom that it has the ICM42688P mounted.

Just orderd all da partd cant wait to build it this thibg is EXACTLY what i was looking for, would love to share pictures when its done but i cant find any social media accounts of yours

amazing video, subscribed! I'm surprised that 1404 3.5" props gave you 200 km/h, I flew my gerprc smart 35 with same specs (but heavier) and it didn't break 100 kmh. I assume that weight matter less than air resistance for these drones? so tower design seems to help a lot.

Darwinfpv seem to have just fixed the 4019 floppy prop issue. Check out their new folding drone

Do you think I could build a version of this with 2s lion batteries that could do long range?

That's exactly what I was looking for. Thanks, brusky 👍

What FC would you put on this if you were building it today?

One thing you forgot to test battery life and flight time....I would say the best one would be the one that enables the most flight time.

what AIO are you using?

Would be awesome if you made this work with HDO2's

OK, put me down for two please, where do I send my doll hairs?

I wanna make the exact same thing but with a vista instead

Ordered the frame, can you please share your tune for it?

Exactly what im looking for 👍 build a HGLRC Petrel 120x with naked o3 (original cam) with 1303.5 HGLRC AEOLUS Motors with 5000kv - weight with 550mah 90C 3s Bonka is 152g. Plenty of Power, quiet but have some vibration Problems…