SpeedFreak

Пікірлер

@LatherioDavenport 13 күн бұрын

Great video one of the first of all time great trick

@georgehorman2309 2 ай бұрын

Will this work on my power stroke 6.0 lol 👍🏻

@automotivemachinerytechnic412 2 ай бұрын

How long can a compressor in this condition last

@vnessawylie 2 ай бұрын

Have you ever got a flash code 4-4?? i changed the driver side sensor on a trailer 53 ' two sensors set up and still have a light on😮

@GearHeadJeff8 2 ай бұрын

This channel still active by any chance?

@Hesifilm 3 ай бұрын

My compressor sound look like this why?(Kia Rio 2004)

@Speedfreak1984 3 ай бұрын

ended up being a bad ac compressor

@penelopethewolfhybrid940 3 ай бұрын

...is that the 454 😏

@Speedfreak1984 3 ай бұрын

nope just a 350.lol

@Mike19sf 4 ай бұрын

Standard on all Camaro, unfortunately, anyone can put contaminated stuff in your tank. I wish it had a locking gas cap. Prevents sabotage. Not sure I like that feature

@mikebythesea45 4 ай бұрын

Your light blue Stylus Pro looks like the Snap-On limited edition color. I have one too. Been with me for almost 20 years. Rugged light, they take a ton of punishment.

@rogelioperez2252 5 ай бұрын

I have that noise in a new compresossor it is normal or something wrong?

@thelegendreh1609 3 ай бұрын

I have the same too in my new compressor

@prefetchmargaret2901 3 ай бұрын

@@thelegendreh1609Me too

@Abizzy84 3 ай бұрын

No that's not good, my AC compressor is making that noise.

@automotivemachinerytechnic412 2 ай бұрын

Mine too

@geok9984 Ай бұрын

My truck is too

@jerryblake4088 6 ай бұрын

Wish I had one

@debraburton3514 7 ай бұрын

Mine is like that, alabama

@alek8881 7 ай бұрын

hey bro where did you buy that??

@robertcash499 8 ай бұрын

Just worked on mine today tried the bubble test was getting plenty of bubbles ,when I wold release cap it had no pressure on it. Cleaned the seat for radiator cap and tighten ears on cap bubbles gone ,if your cap is not seating it will loose water ,hoping this is my problem. I was not loosing alone of water but some.

@joseloaeza685 8 ай бұрын

Hey brother I am currently going through this process, I removed both tanks sending them off to get cleaned, t660 sat for years and we ran it with bad diesel, won’t startup now so I’m removing all supply hoses maybe return also.. worried the fuel pump clogged, so im going to run a setup like yours tomorrow to get some clean fuel through it, so my question is, how did you prime the fuel pressure since it doesn’t have a manual type pump? Thanks

@Zacklife 5 ай бұрын

You have to use some either starter fluid that made for diesel engines to get it starting then it will eventually prime it’s self

@kennull3873 10 ай бұрын

does the intake and the exhaust have different clearance specs? i think the intake is usually .002 tighter than exhaust.

@odairtaveira5675 11 ай бұрын

Which one should I be tight when is on TDC, the 2 valves on cylinder 2 ? Would you mind explaining? Thank you

@paulbaril3831 11 ай бұрын

My first car was a 65 from my grandfather. Wish I still had it.

@Speedfreak1984 11 ай бұрын

bet it was cool

@HoustonHoodNewsTv 11 ай бұрын

Is it in the same location on a 2009 cts base model?

@Speedfreak1984 11 ай бұрын

i dont think the v6 base has the pump

@NMX777 11 ай бұрын

I had an 04 T2000 with a Cat....wish I still had it.

@digitalbilly 11 ай бұрын

great video!!! did you shut it down and let it soak over night?

@Speedfreak1984 11 ай бұрын

i did not but sounds like a good idea

@josephmidiri9910 11 ай бұрын

I bought a 1965 Chrysler Newport in July. Color is almost like yours. Yours is beautiful! I love my car! Thanks for sharing!

@Speedfreak1984 11 ай бұрын

thanks hope you injoy your old chysler

@Alchemist1on1 Жыл бұрын

Great stuff

@Super1test Жыл бұрын

Best tips

@killnconquer2645 Жыл бұрын

Does this work on a cummins n14, Detroit 60?

@bruhbedrivin Жыл бұрын

Did you end up cutting the filters open?

@saschan.6070 Жыл бұрын

Hey man. I just got this catch can and there are so many installation threads routing things in different ways. Did you cap your valve cover port and run air from the intake to the valley plate port? Or did you cap your valley plate port and one valve cover port and run a line from the intake to one of your valve covers? Talked to Dave who owns MM, and he recommends the latter set up due to restrictive flow into the valley plate port. Just curious how you did it, and if it has worked for you?

@charlesbeverly8315 Жыл бұрын

So you used two gallons of fuel and the cleaner correct ? And just let it run , how long do you recommend to let it run ? And I will also turn mine off and allow it to soak over night .

@Speedfreak1984 Жыл бұрын

that sound right,worked good for me

@serpentrae 5 ай бұрын

@@Speedfreak1984 what is the name of the cleaner you order that you said you used on your VW cars, thank you for making the video

@frankolivera1417 Жыл бұрын

Bad explication not size gauge not says how put tdc in

@nospam3001 Жыл бұрын

The valve clearances for both intake and exhaust are from .006 to .010 inches. To find TDC rotate counterclockwise until the number 1 on the flywheel lines up with the timing mark on the plate. Check if the rockers on cylinder 1 are loose. If not rotate 360 degrees. To put cylinder 2 at TDC rotate counterclockwise until the number 2 on the flywheel lines up the same way.

@Streetsweeperv Жыл бұрын

Love those welds

@AnythingWithMotors Жыл бұрын

Im in NC as well and Im trying to get into end dumping and was wondering can i haul a Mac 6 axle end dump its 36ft 102 wide and 92 tall and would my day cab need to have a tri axle on it looking at Frightliner Cascadia and International Prostar? I have been looking into companys to work for before hand as well

@kennethcourcy8681 Жыл бұрын

some trucks have air operated heater controle vales most times in the bunk and if they go bad it will push air right into the cooling system F/L was bad for this also a cylinder that is not fireing because of loss of combustion will also pass the the test and will push air into the cooling system.

@eccentricsmithy2746 Жыл бұрын

You need to invest in a spool gun.

@edsullivan344 Жыл бұрын

sure reefer not everyone cup of tea but i like reefer for fact with reefer miles are better per trip for the most part where on dry van you can get alot of short miles and sometime have to do more than one load a day and nice about reefer i can haul temp control frozen or dry freight where with dry freight all you can do is dry freight iam on dedcated from east to west and get to sleep nights and drive days 98% of the time i just think there more options with reefer yes the waiting sometimes sucks but i dont go thur that ofen myself i do drop and hook for most part

@AD-vy7xd Жыл бұрын

How do you add oil? Does the oil cap part just pop off?

@ELCHINOFIT Жыл бұрын

My truck sounds just like that after turbo wen out and I put a use one it started making that sound and blowing a lot of white smoke mechanic said the engine wen out and need to be replaced but the truck starts it’s weird I feel like it’s the injectors

@thomasparsons3915 Жыл бұрын

Nice! What was the ratio cleaner to diesel?

@sheldonrafuse3837 Жыл бұрын

Can this method be used the same way on a f350 7.3 powerstroke?

@leocentralexp7632 9 ай бұрын

Yes use seafoam

@cmno73 Жыл бұрын

Great video..thanks for this!

@ShellSnell Жыл бұрын

Ever tried to cold start something like E95 when it's that cold? It's brutal for me, but it could also be my tune (Subaru).

@temoaguil1830 Жыл бұрын

MY APU SMOKE 💨 LIKE CRAZY AND STHINK I LOT,HOW CAN I FIX???😢

@Jackknife-TV Жыл бұрын

Man still waiting on videos hopefully you're okay 🫤

@Danyell1002 Жыл бұрын

Hey behind u at power tour 0:24

@yeyis05 Жыл бұрын

I’ve used the Lucas and power Services cleaner products. I never actually knew they worked until My friends Pete With Detroit would blow Fire out exhaust and lope like crazy on start up and would finally idle once it warmed up. I recommended Lucas Cleaner/ and Power services products to him and he asked how much should he put in his tank. I said try whole Gallon and then half gallons for a week and see it it works. About a week later We fired our trucks up in the morning and it purred like a kitten. Smooth as Can be. Total believer in it after that. Great example of a product that works in this video.