Would have been more impressive if you tried to start the car before hooking up the Dewalt battery.

YEAH, have one in the trunk of my car.

Smart Yes Those skinny jumpers will melt So plz use real thicker jumpers

My concern is, if the car you jump has issues and you keep cranking it, that DW battery can be damaged on the spot. The crank amp in a typical car is high. Many people are not you and they might keep going and suck the crap out of it. Good idea if it’s only a quick crank. It pays to invest in a booster. I have one in every car and my Goldwing bike. They are not expensive.

clever!!

Very interesting! A lot of people who sells boosters will hate you for showing that trick!

Thanks 🙏

Thanks excellent 2025

Have you ever had to clean the inside of the throttle body ? I have that o ring air leak and want to know what I will need to be ready to do when I take that thing off . I will plan to do this job at the same time. Also I would add to the list of checking the butterfly valves and doing that Locktite trick for loose screws maybe on this job as well. Any other things i need to be prepared for ? We need to create a system so all gen 3 owners have a plan to do these jobs in sections so we never have to go back again .

Que buen video gracias. Solo que tengo una mitsubishi montero sport 2000 6g72 pero no encuentro el diagrama y manual para hacer esos estudios de análisis para hacer pruebas y no me enciende. Me podrías ayudar con diagramas de este modelo y empezar con las pruebas.

Well done mate! Love to see another Pajero Montero job fixed.. I myself is a Mitsy mechanic for many years and always good to see someone does the same thing I did! Keep it up making up some videos mate and will luv to watch them thanks!

I hate those connectors

I need to do the little o ring repair is this video what I need to study to remove the air intake manifold in order to reach it

What headlights do you have ? My o6 Montero lights look old and yellow

You are awesome and a great motivation for me !

They sell a butterfly repair kit on eBay that has that little yellow piece as one of the parts

Do you think if I just tightened that nut a little more it may re seal it?

I just scanned my Montero , i got po174fuel system 2/1 lean Po171 lean bank 1 And poo57 b2s2 oxygen sensor heater low I sprayed and it’s definitely a Vap leak at that exact part and can’t find any others Should I do that first before I mess with maf or that oxygen sensor ?

When I push on that thing it doesn’t move so my butterfly must be totally stuck

I wonder if there is some way to put a spray sealant around that area to solve this without taking it all off ?

Muchas gracias por estos videos! They are super instructive! I really appreciate the takes where you actually show how to do the jobs! Is hard for people like me that is starting to learn how to do these repairs to even imagine how to do the things when they are just mentioned and then cut and appear all done! Thanks for making sure on showing us how to get it done!

I am going to do the same air pressure on mine , I had mine up at 36 and it’s way to bumpy on the suspension

That air compressor is awesome

My 06 Montero drivers door window was acting up like off track and eventually got stuck halfway down the motor can move it up or down but only a tiny bit like it’s stuck When it happened it sounded like a Rock or something was in there so I gotta take it apart I watched a few videos I found but any advice or suggestions on where to learn more about taking it apart ?

Hello, "The Mitsubishi Montero Channel" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?

Хороший насос Я бы тоже токой хотел отличная задумка 👍👍

Muchas gracias por compartir tu sabiduría y experiencia, valen oro, haces mucho bien a las personas que les interesan estos temas, muy grande amigo Saludos desde España!!!

Good job. I'd also install foam between the condenser and the radiator support. When the hood is closed and in traffic, the fan will pull heated air trapped inside the engine bay again from those gaps. Truly the only air that should come into the engine bay is from the front grill

This actually worked!!! My light went out about a year ago, it’s been bugging me ever since. Sure enough I gave it wack right above the driver side air vent and it turned on. Got to love this channel!

How come you didnt try to clean iit when you take it down? And tell me did you mileage change after you install new CC?? And what was mileag on mitsubishi while you were perform this repair??

Do you have a part number for the foam part and the fan shroud that you can share.

Hola buenad tardes tengo una l200 2019 y tiene exactamente el mismo misterio la compre muy recien y no se si llevarla al mecánico o yo podria hacerle un cambio de una pieza y como lo resolveria solo me activa cuando la apago

I just checked mine and it failed the carb spray test I noticed the the white thing shakes on mine a little to and if that’s normal ?

I am almost positive i have this how much damage does it cause other than running a little Leah

Another great maintenance video for the Montero👍

Sorry last question- what code reader do you recommend I need to chase down a check engine light and abs/ traction control light

My window got lost accidentally I dropped it at the sand mine I work at and never found it unfortunately Should I put duct tape over the hole until I find a replacement?

My ac drain line drips down over the transmission is that normal ?

In Florida it’s so dirty our cars never look as clean as yours The humidity , sand and dirt

Peace of mind purposes! I know the feeling ! Every day I think and wonder about my Montero!😊

I am going to focus on getting my Montero clean underneath and in engine bay then try to replace all the little simple things like hoses that are leaking / the transmission lines I noticed barely leak

I still believe if we used rotary engines our lives would be easier lol No timing belt , no crankshaft etc

I am new to doing mechanical work but I am so impressed and also a little discouraged because i feel I will never get to your level ! I bought my Montero with 196k miles and kept it running good so far to 208k miles over 8 months I did the transmission fluid , coolant flush , front and rear diff , transfer case , oil , and I am afraid to try something this big but I am going to keep learning and maybe eventually get to this level Planning and research is everything!

I am new to doing mechanical work but I am so impressed and also a little discouraged because i feel I will never get to your level ! I bought my Montero with 196k miles and kept it running good so far to 208k miles over 8 months I did the transmission fluid , coolant flush , front and rear diff , transfer case , oil , and I am afraid to try something this big but I am going to keep learning and maybe eventually get to this level Planning and research is everything!

Thank you so much , my 06 has 208k miles and I have done all the fluids thanks to your motivational videos! Now I want to make sure I don’t need to do this My timing belt looks dirty and dry from the window

Thank you so much , my 06 has 208k miles and I have done all the fluids thanks to your motivational videos! Now I want to make sure I don’t need to do this My timing belt looks dirty and dry from the window

The water from transmission got on the belts mine did that also lol

I am going to do this on mine

I actually lost my timing cover accidentally and can’t find it , should I leave it open or can I buy a replacement ?

My 06 Montero engine bay and underside is so dirty it’s like a coat of grime I need to clean Can I use degreaser and hose ?