Great video and very informative. Points me in the direction I need to go. Thank you.

Excellent…. tyvm

thanks, i bought my first machine and had this problem. I will try your solution.

I've been searching for the answer to the same problem with my new XL750. I'm going to try your fix. Thank you so much.

Thanks for the tip. I'll check mine tomorrow. To see if it's going all the way back.

So glad I searched & searched videos until I found yours! Exactly the same problem you were having, I've been experiencing & trying to fix, Well, knowing the sweet spot to bend the rod makes it work perfectly (every stroke). Thanks for taking time to inform the rest of us! :)

Great video very helpful answered a lot of questions that I had on my unit thank you

Your video was very excellent and helpful Thank you

Okay the silver thing the rod goes in has that lip take the top of primer load and un screw that silver piece the rod goes in flip it around so that lip is on the other side boom all fixed works perfectly for me

Good job!

mine keeps swinging up and down

Started having the same problem, thanks for the idea I'll check in to bending the other offset of the rod!

Thank you for this video. I’m having the same problem I’m gonna try it. I’ll let you know how it works

Thanks, I’m going to try this. Having trouble with my large pistol primers feeding. Small pistol feeds fine.

Thanks! It fixed the issue! I probably tweaked the rod when I was switching from the small to the large primer bar and didn't realize it. Looked at other things before I remembered to check KZbin and sure enough your video was there to help me. Thanks again. NS.

Thank you!

Very helpful video, thank you so much. 👌🤠👍

That was exactly the problem I was having. Made the tip look like the sharpened pencil and rounded the tip. Just loaded over 1000 rounds. No more primer problems. Thanks for the 411!

Thank you. Solved my feeding problem. New to Dillion, just picked this up last weekend

It fixed mine. Thx

Thank you for this video. It was very helpful. Well done Sir.

Thank you !

FML video from 2011 and still helping people. ty!

You failed to tell viewers to make sure to purge the trickler tube when emptying the hopper.

Thanks for the help!

Why not make sure that you are truly saved by Jesus Christ and practice this way. Remorsefully confess with your heart your sins to Jesus Christ who is God and tell Him that you right now are repenting of your sins and you want to be born again of the Spirit from above. Tell Jesus that you are remorsefully sorry for breaking His commandments and that you are begging for forgiveness from Him. Allow His blood from the cross to wash away your sins. After this is done with your heart successfully the Holy Spirit will come to live within you and He will rebuild you from the inside out. Look for signs that you are saved. Things like spreading the good news from Jesus, getting other people saved, a craving for the word of God, reading the Bible, etc… These things are known as a calling and fruit bearing. If you're not bearing fruit then keep doing it. Sometimes it takes time to get saved. Read Matthew chapter 13 from the King James Bible. God bless!!

Thankyou for the most excellent explanation of how you fixed this very problem I was having myself. I did your fix and my primer seating problem went away. Most excellent for a first time KZbin video. You nailed it.

I have been fighting this issue for months. I too thought the fix was in the lower bend. I too was wrong. First thing in the morning, I'm heading to the reloading room and work on the upper bend. Thank you for the video.

Exactly what I was looking for. Thank you

So it's years later, how has it been holding up?I have a 2013 GMC Sierra SLT and I need an exhaust that's a little quiet, the one on there is way to loud, I hate to know I'm waking my nice neighbors up at 4:30 in the morning on my way to work.

Have exactly the same problem with my 550. Now I know how to fix it thanks to you. Excellent first video btw.

How do you go about setting it to auto dispense?

My dad bought a used Dillon 550RL from a fri6of mine that no longer had the room in his house or time to reload. We set it up this past Friday an vs that's one of the problems we are having with it and we'll try that. Also the screws that come in through the bottom under the primer bar keep coming loose, I tightened them up but then it's too tight and the primer bar doesn't move. I back them off a hair and within 3 or 4 strokes they're so loose the whole assembly is sloppy. Another issue we are ha6is sometimes a primer feeds upside down or sideways. We know we got them fed into the tube correctly however.

Very Good Video, very helpful

it sure helped me figuring out where is the problem, now i go bending that sucker and see if it works.... curious thing though it never happened before and I have it at least for two years now, maybe more and it's been trough a lot of ammo... it might be that in time that rod get "lazy" and need a bend to give it some new life...

Excellent video! I've been reloading for several years and just broke down and upgraded to this powder measure. Your video explained everything very thoroughly. Thank you

Thank you, I'm getting this press, so I'll watch for this issue

This is the solution I was looking for. I've heard others say bending the bar fixes the problem but I didn't know where to bend it until I saw this video......thanks

very informative! Thanks.

Get a primer bar bearing kit. It installs easily and has a bearing to keep the primer pickup bar aligned. It also comes with a stainless steel slide. Makes primer misfeed a thing of the past.

That's exactly what's happening with mine!

was having the same issue today, I'm halfway there also

Do you have a part number or anything?? I really need this muffler on my Tahoe! Exactly what I've been looking for!

hows it effect fuel economy? for the better, worse, or about the same?

Wish I had seen this when it was new. At around 9:00 you're discussing how the charge weight might be off after the cartridge count goes away and the weight returns to the display. You seem to dismiss the significance of +/- 2 or 3 grains as only being an accuracy problem and it won't affect whether the shot goes off. Mr. Luv1911, +/- 2 or 3 grains is the entire range of an acceptable powder charge for some cartridges. That could lead a new reloader to think that being off 2 or 3 grains is ok. IT IS NOT! The proper thing to say at that point is that an overcharge could send the pressure dangerously high and the charge should be returned to the hopper. Other than that, it is a nice overview of the Chargemaster.

About to set mine up, need to learn as much as I can thanks

Is this the radio announcer for the Atlanta Braves?

Cannot find, any replacement?

calibration also becomes more accurate if you place the weight exactly in the middle of the scale dish instead of off to the side. another thing that helps is having a single 100 grain weight. best/cheapest way to get check weights is buying a old fashioned style balance with the two dishes, they usually come with a set of weights in a protective case. I got my old fashioned balance set, new from the store, at $25.

Great tip - thanks!