Here's some algebra for you: BK3 = (BK2 - X) + XF No other changes.
@topqualityfi82162 сағат бұрын
@@CrawlerCanyon oooh
@V8chump7 сағат бұрын
Mr.Canyon, have you ever seen boomracing weighted beadlock rings? You can add lead weights inside the rim for over an extra pound of weight to your wheels… assuming you have brushless power that would be a huge deal. Further out and lower down than almost any other possible modifications
@CrawlerCanyon6 сағат бұрын
There is an absolute limit to the amount of rotating mass you can add before it turns against you- there is definitely too much of a good thing. For a tenth scale, anything above say 300g per combo (wheel, tire, and insert) can start to hamper performance. Exceptions are giant rigs, like crawler Ryfts, where the WB is so long and the track so wide that the rotating weight doesn’t overwhelm the geometry.
@willjam447 сағат бұрын
Morning!
@neildaniels54438 сағат бұрын
Wagwan Canyonaeros 👊
@HVT039 сағат бұрын
Weeeeee, big fat Rupture Redux! Tell me Wolverine doesnt look brutal on those tires The get 4th place, tied with LP Tusks, beating S5 pins and class 1 Megs and Tusks by 0.5 points or less This only makes me want even more the real Ruptures, fakes arent as good. Im going to make custom dual stage inserts for the fakes, hopefully they will be good enough to make me forget for a while about getting the real deal, as I CANT get them for less than 90 bucks. I tried EVERY option to get them... 50kg SOA in 3s isnt enough to move 2.2 Ruptures? I run 11kg SOA on nihm batteries 🤣🤣🤣
@themountain599 сағат бұрын
Where are you living that you have to dish out 90 bucks for a set of OGs? I agree they are a cheat code and I love them but do the originals really are that much superior than copies? I rather doubt that.
@HVT039 сағат бұрын
@@themountain59 I live in Spain, every nice part is expensive (Jconcepts and Proline tires, Desert Lizard shocks, etc) Just by looking at Mr. C's reviews, with stock foams the fakes are not good enough to make you not want the genuine ones. Mr. C has a video about the real vs fake Ruptures. In my experience, the fakes with stock foams are "decent", they are not Hustler bad, but they make you want to try to make them better
@craigseary236810 сағат бұрын
Wonderful parts killers, I run white dot hb rovers on my wraith and it does the thing, sometimes it demands a part sacrifice
@FaithSaraG10 сағат бұрын
Would we expect anything less from the mighty Ruptures?
@billtruett859315 сағат бұрын
Keep that servo in wolverine until the samurai has pierced, it’s heart and even then just put a new shaft in the gears 🤣
@brianmassey756316 сағат бұрын
"My god, it's full of lights" I just got back from The Great Lakes Gauntlet. Almost 1,000 registered rigs! Also, the other Crawler Canyon was there.
@Bonitacreekrcs17 сағат бұрын
We have a zero G style hose (ours I’m pretty sure it’s a knockoff) it’s nice because it’s light. We have a few big 100ft garden hoses hooked to our water blaster and it probably weighs 70lb,and we have to carry it a long ways when we use it for fencing
@Bonitacreekrcs17 сағат бұрын
38:42 a reefs RC servo may start being necessary with these tires
@themountain599 сағат бұрын
You joking, right?
@Bonitacreekrcs4 сағат бұрын
@@themountain59 I mean like a servo with like a 1000 oz-in of torque
@SamStevens-vo9xx17 сағат бұрын
Yo
@Bonitacreekrcs17 сағат бұрын
Howdy
@Bonitacreekrcs17 сағат бұрын
Weekly dumb idea💡put your smallest tires on zoidburg, maybe lil’fellas tires?
@Bonitacreekrcs17 сағат бұрын
30:16 it probably isn’t 50kg anymore,it’s motor is probably not making the power it once made
@AnyAssumptionBanter17 сағат бұрын
Zero g hose. Yes. Have had them many years. Packs tight. Haven't had issues.
@Bonitacreekrcs18 сағат бұрын
19:33 redcat?😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 those are teeeerrrrrrrrrriiiibbbblllleeee!!!!!!!!!!!
@Bonitacreekrcs18 сағат бұрын
17:19 it is a line now😂
@whiskers76218 сағат бұрын
I'm new to the hobby I have enjoyed a lot of your videos but what does lo stand for
@whiskers76218 сағат бұрын
I got those big ones and ended up doing a cut and shut to make them slimmer to fit the injora inserts more tightly
@Bonitacreekrcs18 сағат бұрын
@@whiskers762 the new 2.2 injora silicones?
@whiskers76218 сағат бұрын
@@Bonitacreekrcs no I was wrong sorry the green inserts for 1.9 didn't fit properly on the tires I got there was bag on them so I cut out about 1/8 inch from the center now they fit snug on the side walls of the insert like I said I'm new to the hobby so I don't know much about anything
@Bonitacreekrcs17 сағат бұрын
@@whiskers762 I’ve been doing RC’s for a year and a half now and i just got some 1.9 beadlocks yesterday. Doing cut,n,shuts is pretty impressive👍
@DHFHades19 сағат бұрын
is the cage this guy is built on still available?
@CrawlerCanyon2 сағат бұрын
There might be some still squirreled away somewhere, but I wouldn't explicitly recommend one. It's an Integy cage for Axial AX10, and in the amount of time Wolverine has been on the job, that thing has bent all to hell. I've been straightening it with pliers.
@chrism576819 сағат бұрын
Iv been waiting on this one! Thank you sir. Excited to see the results.
@Organized-_-Chaos19 сағат бұрын
I probably should know ,but what is LP low profile?????
@chrism576818 сағат бұрын
Usually a 5.25 ish tire for a 2.2 wheel. I think traditionally 2.2 tires were all 5.5 and up.
@CrawlerCanyon2 сағат бұрын
Yep, what the other guy said. A short 2.2 tire. Like the Traxxas Canyon RT from the TRX-6 is super-LP, at 4.75" on a 2.2
@mikeearls815819 сағат бұрын
Those are some big boys!
@CrawlerCanyon2 сағат бұрын
I think it's the biggest I've seen for "10th scale." Even the stock tires on an SCX-6 are about the same size.
@Driver8642120 сағат бұрын
Tires that take no prisoners - either the rocks or the rig. It's not every day you have to build a vehicle around a tire. Mount at your own risk!
@poobah18720 сағат бұрын
I run these on a HIGHLY modified trx4 and I love them. They are cheating. I don't care. They make me big happy and will just about crawl across the ceiling.
@V8chump7 сағат бұрын
Wow wow, what kind of trx4? A sport? I’d love to hear about your build. Fitting those on a non high trail seems crazy! And I want it!
@dkmgm20116 сағат бұрын
I ran them on a 14" wheel base ar60 swapped TRX4 with 120mm shocks and 4270 outrunner on 6s. It was the trx5.
@poobah1875 сағат бұрын
@@V8chump they are on a high trail but it's only the axles, shocks, and gearbox at this point. It's a really capable rig and a lot of its success is because of these tires. They are absolutely preposterous in their ability to just find traction and pull.
@poobah1875 сағат бұрын
@@dkmgm2011 trx5+!
@Bonitacreekrcs20 сағат бұрын
Wasn’t ms.direction wider than that when you did duallys front and rear?
@CrawlerCanyon2 сағат бұрын
I dunno. She might have been <slightly> wider. But she's on Element axles.
@Bonitacreekrcs20 сағат бұрын
Could you stretch these 2.2 ruptures on a 2.9 in rim of a scx6?
@CrawlerCanyon2 сағат бұрын
Probably. The big Rupture is the same size as a lot of SCX-6 tires. But... the stretch from a 2.2 with a 1.9 tire is only a few millimeters per side. 2.9 with a 2.2 is pretty stretchy. That first mounting would not be fun.
@charleshurley892720 сағат бұрын
When are you going to make Logan into a rear steer rig? I think he would do a lot better with rear steer.
@Bonitacreekrcs20 сағат бұрын
Howdy
@Bonitacreekrcs20 сағат бұрын
Mr.c, how do i get power to a direct power flashhobby servo? I have a fusion se 1800kv and I use 2200mah 3s ovonic air lipos
@chriscord652416 сағат бұрын
Solder whatever connector the servo needs to the exact spot that you are plug the battery into the esc. Just red to red black to black. That way the esc and servo have their own path from source =battery
@Bonitacreekrcs20 сағат бұрын
Howdy
@lastcreations884521 сағат бұрын
1st ?
@nahvideos85720 сағат бұрын
2nd ?
@The_RC_Family20 сағат бұрын
@@nahvideos857 3rd? lol
@EliasMcirvin-z3s21 сағат бұрын
Norberto Row
@dillondillabough1639Күн бұрын
Did a really good job describing everything with the truck. Really like this guy's reviews. Keep up the awesome work
@BunyanEden-h6nКүн бұрын
Zita Mall
@northernlightsrc8994Күн бұрын
Wheeling Wednesday is BACK!!!!!!! WOOOOOHOOOO🎉
@knotical689Күн бұрын
Enjoy Proline by the fire! I wish I could have made it but I'm on the other side of the world
@LouieOtto-w1iКүн бұрын
Tomas Lake
@The_RC_FamilyКүн бұрын
Thank you Mr C, just ordered a pillar drill, and I am having chicken nuggets for lunch 😊
@CrawlerCanyon2 сағат бұрын
I gotta say, I've never heard a drill press called a pillar drill, so there's another British-ism I'll file away, with words like loo and lorry.
@The_RC_Family30 минут бұрын
@@CrawlerCanyon LOL You're bloody chuffing welcome old chap! 🙃😉
@daltonwinn2680Күн бұрын
Why anti-proline?
@marcosherrera675Күн бұрын
So I went out and baught one of these fcx10 Riggs because of this video. You pretty much talked me into it lol. My question is about the fair rc batrazzi tires. Are you using the foams the tires come with?? Whatever you are using I want. I'm going to use a rc4wd wheel to but not the wagons. I'm going to use the American racing outlaws. They will look good on my black fcx10. Great video thanks man!
@CrawlerCanyonКүн бұрын
Yep, the included foams. They seem too soft, but they fit the kind of “rolypoly “ nature of the FCX10 perfectly.
@Adalwolf17Күн бұрын
I gotts find one of those boxes. Im using a huge old plano atm.
@BonitacreekrcsКүн бұрын
Howdy
@rcarty419Күн бұрын
How many bags of concrete or is it a mortar mix? Do you do masonry work?
@CrawlerCanyonКүн бұрын
I’ve mixed my own mortar using plastic cement and sand, but prefer to just buy premixed mortar mix, mostly because it comes in tan. I definitely don’t do it professionally. I’m just gluing rocks together.
@mikeearls8158Күн бұрын
Curtis is my boy 🤘🏼
@craigseary2368Күн бұрын
I listen to both the canyon play list and the best played loud playlist a lot
@chrispearce9224Күн бұрын
Ooooh yea. Nailed the paint on ?? GARY MEUSY ?? Absolutely love the two tone and the matte finish.
@TheOtherSock-728Күн бұрын
Gary Meusy!
@JIPPERR_1Күн бұрын
Lasers now?! Time to bust out the smoke machine. Lets Party!
@chriscord6524Күн бұрын
Dude! A Crawler Content Creator Cup. Via invite only @Canyon
@chriscord6524Күн бұрын
Is this official public reveal? I have a mental picture of you. It’s exactly the same face of a dude I worked with like 98.
@michaellenheiser3157Күн бұрын
Good thing about not showing your face is you could, to some degree, be just a patron…. Until you speak then people will know who you are. Enjoy!
@gibsonlife573Күн бұрын
Holy crap you went to Proline by the fire that is awesome