SMALL ARMS COMBATIVES

Пікірлер

@JosiahActual Күн бұрын

Never had this issue with my 2 DD rifles- MK18 RIS3 & DDM4v7. I tried to recreate this over insertion issue loaded DD mags and really slamming them in and trying to over insert and that bolt was sent home every single time. Maybe an older model issue or factory QC problem. Regardless a good video for those it might be affecting. 👍

@smallarmscombatives9901 Күн бұрын

@@JosiahActual DD rifles are great. They work. Most people never find out if their setups work tho.

@SuperTanker1812 21 күн бұрын

I had the same issue but not with a mag pull mag

@jwbennett4009 23 күн бұрын

Luv those G barrels

@JustusShinBlanton Ай бұрын

It just happened on mine recently and it sucks cause it’s hard to get out

@MrYogitron92 Ай бұрын

Recommend?

@smallarmscombatives9901 Ай бұрын

@@MrYogitron92 it looks cool. It changes the recoil slightly. Thanks for watching

@MrYogitron92 Ай бұрын

@@smallarmscombatives9901 appreciate it

@KevinWood44 Ай бұрын

You're wearing sunglasses.....indoors

@smallarmscombatives9901 Ай бұрын

@@KevinWood44 when this was filmed, I needed to wear the sunglasses to cover my eyes. Thanks for watching.

@user-uf3qn5xd9o Ай бұрын

Great video, thanks for the information, didn't think about adjusting without fully taking out the screws it was indeed a pain lol

@jeffproplay Ай бұрын

This is the kind of video I like, and it's not boring. Just looks like someone doing something they love. And it helps me learn more

@smallarmscombatives9901 Ай бұрын

@@jeffproplay thanks! Glad you liked it!

@FreedomBrothersArmory Ай бұрын

Great video!

@smallarmscombatives9901 Ай бұрын

@@FreedomBrothersArmory thanks for watching and the comment.

@maryspeight2840 Ай бұрын

Hands down nothing but top tier quality and workmanship goes into these setups. I was very fortunate to be in a position to obtain one the first run productions of both the 4 cell chest rig and the "Samurai " danglers and still regard this as some of the best equipment that I own . ✊ G. S.

@hunterp2076 Ай бұрын

❤

@MaximPL1100 2 ай бұрын

naprawde super recenzja. Dziekuje wam chłopcy. Kupuję ten namiot.

@Dilligaf.369 2 ай бұрын

This video reminds me of a great Larry Sanders quote I heard some years ago....."There are two types of people that wear sunglasses indoors, blind people and assholes." So funny that guy.

@smallarmscombatives9901 2 ай бұрын

Thanks for watching. At the time this video was shot, I had to wear the sunglasses on videos. Look at some recent videos and I’m not wearing them.

@Dilligaf.369 2 ай бұрын

I'm just messing with ya. Don't be sensitive to dumbasses such as myself. You're doing a good service and of course I mean it cuz I had to be watching to leave a smartassed remark right?!✌️

@Dilligaf.369 2 ай бұрын

You do have to admit that's a funny comment though!

@evanacey1414 2 ай бұрын

12:30 Neither the carrier itself, nor the gas key are chrome lined.

@adamrodgers2377 2 ай бұрын

The inside of them ought to be Chromed Lined. Every one I have had in my hands have had the inside of the Gas Key and the inside of the Carrier. Now that isn't me saying anything snarky or coming off like a A-Hole because you could have seen something I missed. Also some folks (not referring to you) some folks think that these High End AR Manufacturers cant make a mistake, that is B.S. I will never own another Daniel Defense AR. I might buy a Rail but not a Barrel or complete Carbine. I had one where the Gas Port was not drilled at the 12 o'clock position but the friggin 3 o'clock position. Sent it back took them 3 months to get it back to me. That installed a new Barrel. Well I kept having issues with the damned thing so I took it apart and you could unscrew the damned Barrel Extension with your fingers. Got that Warrantied, put it back together, made sure it would shoot and sent that P.O.S down the road. I did tell the guy i sold it to what had happened because I couldn't live with myself if dude had to use it in a Slef Defense situation and it didn't run. I also had to send back one of Knights SR15's back 3 friggin times. That wasn't anything like the Daniel Defense i had it was little aggravating B.S. All that with those Manufacturers but i haven't had a single issue out of any of our S&W's and Diamondbacks. Also SOLGW & Noveske are friggin sweet AR's. Damn i turned this into a friggin book, sorry about that 😂 have a good day 🤙🏻

@smallarmscombatives9901 2 ай бұрын

Thanks for watching. According the Geissele website they are “chrome lined and nano coated” which is a chrome nitride coating itself. geissele.com/reliability-enhanced-bolt-carrier-group-5-56mm-nanoweapon.html

@evanacey1414 2 ай бұрын

You run an EOtech w/o a magnifier on your “DMR”??

@smallarmscombatives9901 2 ай бұрын

I don’t have an EOtech

@thecreakycamper5560 3 ай бұрын

Great review !!!!! Best one on the internet. I think that I'm going to pick one up. I'm 71, and find it hard to enter and exit the one man that I have. My boy brought his LiteFighter from N.C. last week. 20 years in the Army and he says that it's the best that he's used. Thanks again for the flawless video and Thank You for your service.

@thriftysurvivor6117 3 ай бұрын

Great informative video. I like the fact that the newer version has a witness mark on the cam pin.

@evanacey1414 2 ай бұрын

That was the older version lol

@paraAA82 3 ай бұрын

Please ignore precious comment. I found the link. Thank tou

@smallarmscombatives9901 3 ай бұрын

Thanks for shopping!

@paraAA82 3 ай бұрын

I visited your website, I didn’t see EDC belts…

@uncommon_korean 3 ай бұрын

Love my T1C AE! Had for years and nothing else compares 🇰🇷🇰🇷

@rossauce12 3 ай бұрын

One thing you can do, geissele used to reccomend this before they were real popular is get the ssae with the heavier spring that they have for $5

@rossauce12 3 ай бұрын

It's fucking crazy that u have to spend 5 min explaining ourself why u have one of the best brands of ars because panties on the internet get hurt when someone wants to pay for a nicer name when they make a uglier part that works just as good for better....litterally making fun of someone "why are you wearing Adidas! Hanes is just as good"!!!!!

@coldhardtruth8518 3 ай бұрын

He sounds like the teacher on south park

@paraAA82 4 ай бұрын

No thanks. some of the shooters, don't even have the basic knowledge of carbine work. One of the guys forgot to chamber a round and also forgot to disengage the safety. Those are basic weapon manipulations that should be ingrained before doing anything else. No offense or disrespect intended with my comment. just respectful feedback.

@smallarmscombatives9901 4 ай бұрын

Thanks for the comments. That’s exactly the point. When put under just a bit of pressure like the runs, moving weights, etc, the participants can see how important it is to ingrain flat range skills. However mistakes can still be made if an operator has proficiency on the flat range but add more stress like you see here. Those skills also need to be ingrained on this level.

@paraAA82 4 ай бұрын

@@smallarmscombatives9901 Thanks for the respectful and very good reply to my comment. My hat off to you sir. Yes, you are 100% correct and I stand corrected. I have no problem admitting I was mistaken when somebody produces a logic, accurate and well articulated rebuke. You have a subscriber for life. Keep up with the superb work you guys are doing. God bless.

@maryspeight2840 4 ай бұрын

Hey man no worries on the comment , went back and looked and you called it right , and next time I wiil try and make Damn sure that does NOT happen . Good call , and please do not let my retarded ass mistake throw shade on any of my fellow shooters . Better yet come out and run with us , be glad to have ya !! Cheers ! "Shortbus"

@dossdahlem5554 4 ай бұрын

Fits like a glove Keep up the hustle 👊🏻

@smallarmscombatives9901 4 ай бұрын

Thanks!

@CitizenCarrier 4 ай бұрын

I’ve had my T1C Axis Elite for about a month now and it’s awesome. I have a Walther Full Size PDP 5 inch concealed on me every day and the T1C hides that big boy better than any other holster I have for it. Virtually zero printing and plenty comfortable for me.

@brettbreza8815 4 ай бұрын

Nice rifle!

@hairydogstail 4 ай бұрын

Mil spec is a set of standards and tolerances set by the TDP spec..Most commercial AR rifles and parts do not meet mil spec, let alone surpass them...The Geissele enhanced bolt is claimed to last 5 times longer than a standard mil spec bolt.. If true, then it might would be worth the cost.. Add the cost of 5 mil spec bolts to one Geissele and you will get your answer..The military changes bolts approximately every 6000 rounds as routine maintenance.. It is the higher residual pressure that caused the bolts to fail with the carbine length gas tube rifles, not dwell time..LMT made the cam pin channel longer (on their enhanced bolt carrier) on the straight part to allow more residual pressure to drop before extraction occurs with the carbine gas tube rifles ..The down side is the enhanced LMT BCG would not work correctly with the rifle length gas tube..

@bosweeney7195 4 ай бұрын

What happens when there is a squib round in a machine gun ? I have never heard of one ..

@bosweeney7195 4 ай бұрын

I have been loading since the 70s never had a squib . I never load on a progressive press and always weigh every powder charge ! Labor intense but safe .

@sammue6349 5 ай бұрын

RATT!!!!!!!!!!!!!!!!

@darlsbarkley3493 5 ай бұрын

Pull the bolt back on your super duty rifle and look at the cutout for the cam pin, then do the same with a different rifle. You'll see that geissele didn't change the cam pin design on newer rebcgs, they just can't use their cam pin design for carriers that aren't being used in a geissele upper

@smallarmscombatives9901 5 ай бұрын

Good observation. Thanks for watching. Check out our gear www.smallarmscombatives.com/gear.html

@hunterp2076 5 ай бұрын

Nice slings.

@AnthonyD1986 5 ай бұрын

How do you fix this? I’m having a similar issue.

@smallarmscombatives9901 5 ай бұрын

I prefer Magpul magazines for AR15s because they have a tab to prevent over insertion. Check out our website www.smallarmscombatives.com/gear.html

@dallasweber7692 5 ай бұрын

It’s Robust. Reliable & Is Accurate. Nothing Is Perfect.

@maryspeight2840 5 ай бұрын

Someone please tell that "guy" with the timer to wake up !!!🥱 Running same setup for a G 43x and would reccomend both the belt and holster for apendix style carry . G, Speight

@Wammywammsters2024 5 ай бұрын

I could not move that lever up and down like you did. I had to loosen it completely to where all the screw came out. I could never slide it up and down like that.

@smallarmscombatives9901 5 ай бұрын

Might take a bit of finesse. Thanks for watching. Subscribe! www.smallarmscombatives.com/gear.html

@maryspeight2840 5 ай бұрын

Great stuff !!

@josephparks9789 5 ай бұрын

USA MADE ALL THE WAY

@walksfletcher 6 ай бұрын

Why would anyone be so stupid as to actually buy someone else's reloaded ammo.

@marvel.23 6 ай бұрын

When your vocabulary is lacking, just insert a profanity, everything will be OK.

@maryspeight2840 6 ай бұрын

Another great product made "locally" by the fine people at Small Arms Combatives. Super high quality materials made with pride and integrity with attention to details is what makes the difference when the going gets tough . ✊ G. Speight

@smallarmscombatives9901 6 ай бұрын

www.smallarmscombatives.com/store/p40/specialoperationschestrig.html

@Texasbroski512 6 ай бұрын

Love my 14.5 superduty just running a holosun 510 green dot Daniel definitely fixed irons trex arms along Daniel Defense VFG and Surefire dual fuel pro 1500 lumens

@smallarmscombatives9901 6 ай бұрын

Thanks for commenting. Check out our website for cool gear! www.smallarmscombatives.com/store/c4/gear

@chrisglover7080 6 ай бұрын

Nothin wrong with reman ammo shit happens you caught it. Have been shooting reman ammo for years im 54 and i can remember factory stuff screwin up just as much. The factory stuff being maid right around the end of the cold war late 80's sucked.