With the 2 extra intakes at the front its basically a more budget and smaller version of the view 270.
@localtechexperts14 сағат бұрын
Yeah its the MATX version of the 270
@Jason-iv8ju6 күн бұрын
Hi! How’s the front mesh? Does it have small holes which can block some dust? Thanks
@localtechexperts5 күн бұрын
Yes it does
@999samus76 күн бұрын
the case looks really interesting, not the usual box shaped, fish tank case...
@localtechexperts6 күн бұрын
Yeah they were kind of popular for a second there but kind of dropped off.
@rocketbunny93477 күн бұрын
Hi case looks awesome, I wanted to ask if this can fit ASUS TUF 7900gre with MSI B650M gaming plus wifi micro atx mobo?
@localtechexperts6 күн бұрын
Hrm.. If that card is 2.5 slot it may have clearance issues with the bottom fans.
@rocketbunny93475 күн бұрын
@@localtechexperts thanks for the response, yea I figured. Ended up finding an affordable case with good clearance tho! Thanks again, subscribed for the informative responses :)
@Rehe-n7k8 күн бұрын
Are the fans and the fans argb daisy chain able
@speed900057 күн бұрын
Yes
@woax.8 күн бұрын
I was looking at this case online is the airflow on it good?
@localtechexperts6 күн бұрын
These fishtank cases are not actually that great for airflow. Mesh sided ones are better.
@trigger81639 күн бұрын
Nice overview mate. Do you know if the top dust filter is removable? Cheers
@localtechexperts9 күн бұрын
Hrm.. Cant recall sorry.
@bulldogboy1009 күн бұрын
Hi Jason, bummer you had to clean it but bonus that it was working
@localtechexperts9 күн бұрын
Yeah I tend to get some really disgusting ones.
@Awxvo10 күн бұрын
Would this really fit the phantom spirit 120se cooler? Some cases lie and I want to know if it actually would fit a 155mm cooler
@localtechexperts10 күн бұрын
Dont have this one to measure anymore.. If the specs say it will fit a 155mm cooler then I have to reason to think otherwise.
@JosephKarthic11 күн бұрын
does an asus p7p55d-e motherboard and gtx 1660 super would fit in this?
@localtechexperts11 күн бұрын
That looks like an ATX motherboard.. These cases only fit MATX motherboards. So you would have to find a different motherboard... The GTX1660 is fine though. I have done a bunch of builds into this case with that GPU.
@JosephKarthic11 күн бұрын
@@localtechexperts oh ok thanks, Also Im planning on upgrading my 15 yr old cpu i5 760 to the upcoming core ultra 7, do you think an asus strix z890 would be the good choice?
@localtechexperts10 күн бұрын
Couldn't say for sure until release.. Particularly the cost to performance ratio.. Also Asus have been getting dragged through the mud recently for poor customer service in relation to warranty returns.
@bobmuller311811 күн бұрын
Nice showcase, thank you :) Considering this case for my first build in quite some time, but one thing is bugging me: from the time lapse it looks like the PSU power switch is not accessible in a finished build? That would be KO for me, as I semi frequently travel with my PCs. I like the handle so much tho 😭
@localtechexperts11 күн бұрын
Yeah jonsbo tend to hide them up front. Just leave the psu turned on.. Not sure how that would effect with traveling?
@jamesleicher12 күн бұрын
planning to build my daughter one using b660m asus with i5 12 600,fan cooling ok?
@localtechexperts12 күн бұрын
This case is for ITX motherboards not MATX. Also it's kind of centered around aio cooling for the cpu.. If a 120mm AIO is within budget would certainly go with one of those.
@jamesleicher12 күн бұрын
@@localtechexperts mini mother board?
@localtechexperts12 күн бұрын
Yes this case only fits ITX motherboards.. Not MATX or ATX.
@jamesleicher10 күн бұрын
@@localtechexperts thanks I change it in my list
@kpj953516 күн бұрын
I think you put 2 reverse fans and 1 fan in the top not 3 exhaust.I am building in 1 of these in black next week.would you recommend custom fan mesh filters on the undercarriage?
@localtechexperts13 күн бұрын
Yeah I noticed that post filming unfortunately. Dont think mesh in the bottom would actually help that much because the ventilation on the sides.
@thomasanderson773417 күн бұрын
My guy...your dog barking just scared the ever living piss outta me LOL
@localtechexperts16 күн бұрын
Whoops sorry.. I promise they are friendly ;)
@Highlights-zx6zn21 күн бұрын
So i bought the same case i guess i didnt understood the video so the pc turns on but the fans arent spinning so i power it on and everything goes on just the fans arent spinning can someone help me?
@localtechexperts21 күн бұрын
Like the case fans? Are they all plugged into the fan headers?
@Highlights-zx6zn21 күн бұрын
@@localtechexpertsyes they are all pluged in
@localtechexperts20 күн бұрын
Not just the ARGB but the actual PWM cables too? they have two cables per fan. It would be weird for all the fans to be dead at once.. It includes a splitter so maybe bypass that for testing each fan.
@bethnaughton954221 күн бұрын
This is awesome well done! You explained it really well.
@localtechexperts21 күн бұрын
You are very kind. Thankyou
@chrisgonzalez346821 күн бұрын
good joob this is the only extended review out there, well appreciated!!!
@localtechexperts21 күн бұрын
Glad it was helpful!
@DiosAfkJourney23 күн бұрын
Hi so sorry but is it ok to fit the rtx 4070 ti super in it? If not can i just remove the bottom fans?
@localtechexperts22 күн бұрын
The bottom fans can be removed.. Just may have to also check the length because this is my no means a long case either
@DiosAfkJourney22 күн бұрын
@@localtechexperts Thank you for your response. i am using the same mainboard msi b650m gaming wifi, and the rtx is around 59mm heigh and 307 mm length. do you think it can fit in well?
@localtechexperts22 күн бұрын
The specs say 330mm for length of GPU so should be ok.
@Fabi_EG28 күн бұрын
Can you use a atx mainbord in that case ?
@localtechexperts28 күн бұрын
No you want the View 270 for ATX size.
@SubhashEditor-r9e29 күн бұрын
Nice 🙂👍
@localtechexperts29 күн бұрын
Thanks for the visit
@BalijafobijaАй бұрын
bro needs more subs fr
@localtechexperts29 күн бұрын
I couldn't agree more :P
@artei310Ай бұрын
The motherboard I’m getting only has 2 argb connectors, was that splitter they included an argb splitter?
@localtechexpertsАй бұрын
They dont include a splitter but the fans are daisy chainable together so you wont need one.
@artei310Ай бұрын
@@localtechexperts ah ok thanks
@StevoHDAАй бұрын
Heya mate, any other corners cut that affect function? I see there's no dust filters but the way they're usually implemented on budget cases isn't as easy as just having this fine mesh.
@localtechexpertsАй бұрын
No not really.. Its a solid little budget case despite the price
@zapdosmtr4961Ай бұрын
How you have fans set up as exhaust and intake?
@localtechexpertsАй бұрын
Fans in the bottom as intakes.
@TidalTerrorАй бұрын
I have the same story I had a pc and told them the GPU had failed i tested and told them it had failed. theygave it back to me said it was fine I plugged it back in and failed it. returned it back to them to be returned its fine, within 5 minutes I got home it failed again. i told them did you try DHMI oh no we didn't... lol The GPU was failing on HDMI and it took 3 attempts for them to even look at it and I told them when I dropped it off in the first place.
@localtechexpertsАй бұрын
Yeah really would think there are processes and checklists for testing. Not sure whats going either stressed staff trying to close tickets or what.
@eziet_Ай бұрын
is the airflow good enough being only from under?
@localtechexpertsАй бұрын
Yeah the fans are actually molex run full on all the time and the volume of the case is quite small already.
@roythunderplumpАй бұрын
Many thanks for showing how to build in the case. 🤩
@localtechexpertsАй бұрын
My pleasure 😊
@AndriiOrlikАй бұрын
Is it possible to fit 160mm atx power supply in there?
@localtechexpertsАй бұрын
Think you should be able to stuff one of those in there..
@Tom-hi3jnАй бұрын
Yk I skipped ten second 6 times and every time I heard an „um“. Already on my way out of here.👋
@localtechexpertsАй бұрын
Umm yeah I'm working on it
@HaasWheelbarrowАй бұрын
Is it possible to wire the ARGB cables to the case button?
@localtechexpertsАй бұрын
The case buttons are all one connector so not really on this one.
@HaasWheelbarrowАй бұрын
@@localtechexperts So if I have just one 3 pin ARGB header on my motherboard, I don't need a controller?
@localtechexpertsАй бұрын
Yes but either the fans will need to be able to be daisy chained or have a splitter cable.
@hernandezcruzalejandro4510Ай бұрын
Help! When I press the button to change the color of the fans, my PC restarts but doesn’t change the color. What can I do?
@localtechexpertsАй бұрын
The reset button cable can plug into the RGB controller instead of the motherboard to make it change the colours I believe.
@kenbad8271Ай бұрын
I used a Corsair case (3500XARGB ATX) which is very similar to your case here but I didn't have to sacrifice any fan real-estate the only thing that makes mine different is the front panel buttons are on the top of the case . That case is still very nice though and is $30.00 cheaper than my case in my area I also noticed that some motherboards ATX included would fit better in this case so you wouldn't have to leave out any fans.
@localtechexpertsАй бұрын
Yes thats correct.. I mention that in the video.
@ralfryu1163Ай бұрын
번역이 되서 볼수 있게되서 고마웠어요!
@localtechexpertsАй бұрын
시청해주셔서 감사합니다
@user-hi1yg5el1dАй бұрын
Hey, I'm planning on buying this case and was wondering are the fans PWM (4pin) or DC(3pin) Powered? Thanks!
@localtechexpertsАй бұрын
Hrm.. I believe they were DC from memory.
@user-hi1yg5el1dАй бұрын
@@localtechexperts Okay thanks!
@gregwwinklerАй бұрын
I’m curious how you mounted the fans on the bottom. The screw holes are not large enough for self tapping fan screws
@localtechexpertsАй бұрын
There are longer screws for mounting like that.. They are the same ones used for radiators and run the full width of the fans from top to bottom.
@JumnorNouАй бұрын
Hey I got the same pc box but apprently my cousin said I couldn’t put the rgb fan on like the fan works but the light doesn’t work can u please help me out
@localtechexpertsАй бұрын
Did you connect up the ARGB cables of the fans to an ARGB controller?
@JumnorNouАй бұрын
@@localtechexpertsapprently he told me my mother board has no where for the rgb lights to connect to what should I do?
@localtechexpertsАй бұрын
You may have to find your self a 3pin argb controller. www.amazon.com/argb-controller/s?k=argb+controller
@localtechexpertsАй бұрын
English may not be everyone's first language so maybe keep that in mind?
@localtechexpertsАй бұрын
You will need an 3pin argb controller.. you can search them on amazon.. Quite a few around.. Would maybe suggest one with either button controls or one that you can plug the reset cable into.
@bulldogboy100Ай бұрын
Did I see correctly that the front panel connectors were the all in one cable rather than individual connectors? If so then I think it looks like a good case for the money
@localtechexpertsАй бұрын
Yeah they are.. Kind of a boon and a disadvantage. My argb controllers use the reset cable to change the colours but cant seperate them for that use.
@bulldogboy100Ай бұрын
@@localtechexperts I guess it comes down to a use case scenario
@localtechexpertsАй бұрын
Yeah most newer motherboards will have onboard ARGB headers.
@randomunblocksАй бұрын
got this case how do I change the fan speed, I set the fan speed in bios but it don't change
@localtechexpertsАй бұрын
Did you plug the fan controller pwm connector into the motherboard?
@randomunblocksАй бұрын
@@localtechexperts yes it still doesn't work 😢😢
@coltonburchett318Ай бұрын
@@randomunblocks i am experiencing the same issue
@randomunblocksАй бұрын
@@coltonburchett318 Have you found a way to fix it, maybe I should return it than buy a new one??? Or buy a new cable?
@randomunblocks11 күн бұрын
@@coltonburchett318 just ask them for a new one, it worked
@vnoheart9515Ай бұрын
Does it have Led button?
@localtechexpertsАй бұрын
Cant remember off the top of my head but I think yes..
@speedylaurАй бұрын
You could have rotated the portrait video and zoomed in editing 😊
@localtechexpertsАй бұрын
Certainly could have.. If I was that cleaver.. Editing is not my strong suit.
@jobecope8159Ай бұрын
I just bought it. Do you think the handle is less secure, like it's bent?
@localtechexpertsАй бұрын
Handle on my two seemed pretty sturdy. Just have to make sure to attach it properly.
@jobecope8159Ай бұрын
@@localtechexperts Maybe the part I used was too heavy
@bulldogboy100Ай бұрын
What motherboard did you use Jason?
@localtechexpertsАй бұрын
Hrm.. Just a H110-M board I believe.
@Not_Sus-r1oАй бұрын
Can u use a b550
@localtechexpertsАй бұрын
@@Not_Sus-r1o It fits any motherboard of sizes ITX and MATX.. So a B550-M would be ok.
@localtechexpertsАй бұрын
@@Not_Sus-r1o It can take any motherboard ITX or MATX sizes.
@ThefufuistАй бұрын
would I be able to use a momentary switch with this? the suzo happo off amazon to be specific? edit: the black one will be coming out soon, sept 12th I think
@localtechexpertsАй бұрын
Those are like arcade switches are they? From memory those connect to another daughter board first then that board is connected via USB.
@ThefufuistАй бұрын
@@localtechexperts they’re basically the thing that turns a pc on and off. I’m worried about the diameter of the power button hole on the case not fitting the diameter of the momentary switch. (Basically a lock)
@localtechexpertsАй бұрын
The button is quite small and would take a bit of working to get it to fit.
@ThefufuistАй бұрын
@@localtechexperts alright. Thank you so much!
@bulldogboy100Ай бұрын
I'd rather see more of the case review and less of the build personally
@localtechexpertsАй бұрын
haha Well now I don't know what to do. Most people are dropping out about half way through the case breakdown so figured they were to long.
@bulldogboy100Ай бұрын
@@localtechexperts I usually skip the build montage because it goes so fast you can't really see what you're doing anyway
@localtechexpertsАй бұрын
Can always play at 1/4 speed ;)
@keysmoove1Ай бұрын
Will this fit a 360mm radiator
@localtechexpertsАй бұрын
Did you watch the video at all? I use a 360 radiator in this actual build.
@ashcetchem5991Ай бұрын
Does this case support vertical gpu mounting?
@localtechexpertsАй бұрын
Not by default.. Maybe with some after market attachments it can.
@jobecope8159Ай бұрын
Good review 👍
@localtechexpertsАй бұрын
Thanks for watching :)
@jobecope8159Ай бұрын
@@localtechexperts Is it suitable if you use an ATX PSU, if you use an air cooler?
@localtechexpertsАй бұрын
Yes.. Even with a 240mm radiator in the top or 120 radiator in the back would be fine. Mainly because the ATX psu is mounted in the front.
@nahidhasannayan973Ай бұрын
motherboard model??
@localtechexpertsАй бұрын
Oh Its been awhile but I think just a Gigabyte Q170-M of some description
@eaudeparfumman2 ай бұрын
Do you think an xfx radeon rx6600 will fit in it? It only has two fans
@localtechexpertsАй бұрын
I think that should fit
@axstra25572 ай бұрын
Can you review the aqua 5?
@localtechexpertsАй бұрын
If Okinos send me the 5 I will review it.. These cases are not really that available in Australia yet