I just don't like the ultra wide shots, the colour grading and vignette almost looks like it's a massive screen of colour shift
@ChrisCorkPhotographyКүн бұрын
@Yayadays111 at which minute in the trailer. I'd like to see the scene you're referring to
@Yayadays111Күн бұрын
@ look at the shot with people throwing stuff at superman. Almost like the great Budapest hotel artistic colour grading strength but with distortion on, it just looks weird like a colourshift on the entire screen. It works in Grand Budapest hotel because they were choosy on every colour in the scene, what people wear and what colours are allowed to be on the scene.
@saivishwak57353 күн бұрын
Looking for a low frequency(60-75hz) 24inch 1080p monitor for my laptop and PS5 for casual games like Ghost of Tsushima and God of war
@mtippett803 күн бұрын
Great and insightful breakdown! Until you pointed it out I didn't spot the subliminal influences in how they use the colour pallet throughout the trailer!!!!!!
@ChrisCorkPhotography3 күн бұрын
yeah, the outfits and choice of draw colour etc. They do it quite a lot in the movie industry.
@datobaggu5 күн бұрын
Nice walk-through! Thanks!
@zebeddy5 күн бұрын
Really good to see how your edit changed the look of the photo. Would love to see more theory in action...great video :)
@ChrisCorkPhotography5 күн бұрын
@zebeddy thank you. Yep, it's definitely a subject I will be covering more :)
@travellingjournalist9665 күн бұрын
I’m not one for using Ai but I can see if you do wedding photography or are photographing models it would be a benefit for getting consistent results
@rmuhammadaldaffa23 күн бұрын
convert krita to powerpoint from libreoffice impress
@ChrisCorkPhotography23 күн бұрын
@@rmuhammadaldaffa 🤔
@breadoflifemeditationandhe466Ай бұрын
Great 👌👍 I will love to buy the printer for foil 🖨️ please 🙏 how should I go about it
@ChrisCorkPhotographyАй бұрын
@@breadoflifemeditationandhe466 any toner based machine should work
@CastlelanestudiosАй бұрын
That's easier than I thought, I was expecting to have to run them through a roller/press after gluing
@ChrisCorkPhotographyАй бұрын
@Castlelanestudios nope, just hand roll and some weight on top over night. Packs of paper or similar. Glue is very strong and hard to pull apart instantly
@CastlelanestudiosАй бұрын
Question: As these were full coverage, how do you cost jobs like this? or do you have a flat rate assuming a certain average toner coverage?
@ChrisCorkPhotographyАй бұрын
@@Castlelanestudios hello, I pay per a3 sheet, even if it's a4 it costs the same as a3. So I always run a4 2 up
@CastlelanestudiosАй бұрын
@@ChrisCorkPhotography Hi, thanks for the fast reply - Ahh so you're on a per-page contract - I've got a Versant 180 arriving next week but bought outright with no contracts so trying to figure out how I can cost per page. Some really good videos you have on here, I've been struggling to find much from printers. My main business is high quality art printing but have a lot of requests for business cards and greetings cards etc so decided to invest.
@ChrisCorkPhotographyАй бұрын
@Castlelanestudios thank you. There are independent service contracts out there also, ones with a guy called Malcolm. Can't remember his business name but it may be worth having a Google
@AndreiBlandaАй бұрын
Perfect. Thanks!
@CarlosCorrea-uj2vxАй бұрын
Nice video, but for some of us that are beginners the video does not start from scratch.
@ChrisCorkPhotographyАй бұрын
@@CarlosCorrea-uj2vx what did you need help with?
@sjm.photosАй бұрын
cool video and interesting outcome. i think the gopro needs either aiming up or mount it differently
@ChrisCorkPhotographyАй бұрын
@@sjm.photos yeah thanks. May try it with a shoulder mount
@doogiehamАй бұрын
Great video, Chris. I loved the lens comparison as well as the BTS set-up for your shots. I really felt like I was there in person. I’d love to see a video where you provide your tips on manual focusing with vintage lenses on the S5ii. Actually, the S5ii is my favourite camera for using MF lenses because of the excellent focusing aids. I’ll look forward to your post-processing video as well.
@ChrisCorkPhotographyАй бұрын
@doogieham thank you! I'll add a bit in about how I focus the manual lenses in the next video or a short. I use focus peaking which makes it feel almost semi automatic as you get a visual aid
@Blackdovestudios303Ай бұрын
Thanks this was super helpful and saved me a lot of headache. Appreciate it!
@ChrisCorkPhotographyАй бұрын
@@Blackdovestudios303 most welcome:)
@Dolbers1232 ай бұрын
Nice project. Where did you get your 3mm foam board from? Thanks.
@ChrisCorkPhotography2 ай бұрын
@@Dolbers123 thank you. They're called signtradesupplies
@sundaydiver2 ай бұрын
IMPORTANT: This is not mentioned in this tutorial, and it caused me endless frustration. Make sure to select "Selected Areas" in your Quick Mask Options, NOT "Masked Areas," which is the default. If "Masked Areas" is selected, this procedure will not work.
@ChrisCorkPhotography2 ай бұрын
That will be useful to someone who experiences the same issue, cheers
@mtippett802 ай бұрын
stunning shots you managed to get!!!!!!!!!!
@ChrisCorkPhotography2 ай бұрын
🙏🙏🙏
@jazminandthumper50722 ай бұрын
Wow great job capturing
@ChrisCorkPhotography2 ай бұрын
thank you!
@jazminandthumper50722 ай бұрын
@@ChrisCorkPhotographyI’m curious as to how you got such smooth movement . I love doing time lapses I use my go pro so if I film in a 4/3 ratio I can get a bit of movement editing . But nothing Ike the movement you have in your video
@ChrisCorkPhotography2 ай бұрын
@jazminandthumper5072 this was a shot taken every 10 secs and played back around 16fps.
@jazminandthumper50722 ай бұрын
@@ChrisCorkPhotographyThankyou
@sjm.photos2 ай бұрын
cool video lovely timelapse ive just uploaded a video of it just thought id do something a little different
@ChrisCorkPhotography2 ай бұрын
Thanks mate, will have a watch
@TheYizuman2 ай бұрын
Will it work on iPhone 16? I cannot find that feature.
@ChrisCorkPhotography2 ай бұрын
Hello, I'm not sure. Last iPhone for me was the 12 Pro Max
@garyheath64382 ай бұрын
Great skills Chris. A brilliant video
@ChrisCorkPhotography2 ай бұрын
Thanks mate :)
@ChrisCorkPhotography2 ай бұрын
If you would like to see part 1 from May 2024, click here: kzbin.info/www/bejne/f3-Uenxud9Jrd7ssi=9_EPThsINNJVrNJ4
@MrTolicha2 ай бұрын
Absolutely stunning. Many thanks Chris, thanks to you and your post in Kent views make one dream to come true.
@ChrisCorkPhotography2 ай бұрын
Ah that's lovely, I'm glad it helped 🫶
@sword123n2 ай бұрын
Hello i need your help , i use a Xerox560 series production printer When i try to do gold foil sleeking, The Foiling layer output comes out great! however iam getting dotted patterns all over the sheet i believe its a counterfeiting measure yes. The confusing part is that i have already set the brightness to 115% darkest in fiery & " Print in Grayscale" while giving for print, what am i doing wrong? Any advise would be really Valuable! Looking forward to hear your thoughts on the same.
@ChrisCorkPhotography2 ай бұрын
Hello, yes that's normal and can't be disabled. It only does it on colour. All you can really does is reduce pressure to minimise. Also if you run the foil print layer as solid black and greyscale in fiery it will not be on there.
@sword123n2 ай бұрын
@@ChrisCorkPhotography Thanks Chris yes you're right I tried the same today and it worked out great! I was actually turning on the greyscale in the general print command. I realised it's to be done at the color sections in fiery. Thanks again!
@ChrisCorkPhotography2 ай бұрын
@sword123n ah that's great! Glad you've now got it working as hoped
@jamesclark40582 ай бұрын
Damn that’s crazy! 😊
@ChrisCorkPhotography2 ай бұрын
@jamesclark4058 definitely going to try this combo more. The best of both worlds
@mtippett802 ай бұрын
Cracking shot
@NigelBaileyPhotography2 ай бұрын
Thanks - should save me hours
@ChrisCorkPhotography2 ай бұрын
Glad it helps :)
@ChrisCorkPhotography2 ай бұрын
If you would like to see a guide on how to capture the Northern Lights in Kent, click here: kzbin.info/www/bejne/g2HHmWOagrCiebcsi=Rnqa4Fm0X-gBd-UO
@travellingjournalist9662 ай бұрын
From around the 11th you can start seeing it in the evenings it will get higher in the sky but will get weaker, still give it a go as the tail could start splitting
@ChrisCorkPhotography2 ай бұрын
@@travellingjournalist966 yeah the only problem then is it will be a full moon too
@travellingjournalist9662 ай бұрын
@@ChrisCorkPhotographyyeah but not till the 17th which will be a super moon
@ChrisCorkPhotography2 ай бұрын
@@travellingjournalist966 Will keep an eye on it :)
@I922sParkCir2 ай бұрын
That's a great idea! I returned mine and bought the Tamron. If I dropped my Tamron on the ground tomorrow and needed a replacement, I would absolutely get the Samyang.
@rhalfik2 ай бұрын
Did you notice any difference in image quality?
@I922sParkCir2 ай бұрын
@@rhalfik No. Slight color temp differences. The AF was good, but Tamron is really good. I shot a bat mitzah with the Samyang, and then a week later I shot a wedding with the Tamron. Aside from the lens creep I wouldn't be able to tell the difference. I know Samyang is known for occasional sample variation, and I tested mine with charts. It was solid.
@djb56452 ай бұрын
Which nhs lab are you recording from?
@ChrisCorkPhotography2 ай бұрын
@djb5645 haha its my print cabin not an NHS lab 😂
@travellingjournalist9662 ай бұрын
@@ChrisCorkPhotographyhe can't be in the print industry lol
@djb56452 ай бұрын
@@ChrisCorkPhotography lol, looks like many labs I have worked in 😂
@ChrisCorkPhotography2 ай бұрын
@@djb5645 haha maybe I need to put it more in focus so people can see the printers :)
@victoriaf.50252 ай бұрын
Good videos dad❤❤❤❤❤❤❤
@michaelgreenvideo2 ай бұрын
Thanks for sharing mate!
@ChrisCorkPhotography2 ай бұрын
No worries mate, hope I caught ya before you sent it back!
@ChrisCorkPhotography2 ай бұрын
How to stack the tracked shots in Sequator can be found here: kzbin.info/www/bejne/aIqwZHl8aJZlbqMsi=FlBNwYYbOVd6S62u
@ChrisCorkPhotography2 ай бұрын
If you would like to see how to blend the tracked shots from above then click here: kzbin.info/www/bejne/pnmThmdppayaf5Isi=J_OKDH-1YxB1bFP4
@ChrisCorkPhotography2 ай бұрын
If you would like to see in camera timelapses vs those rendered in LR timelapse, click here: kzbin.info/www/bejne/raW5dKJjg5d_jMksi=wWrhK9PaLSkj7bob
@ChrisCorkPhotography2 ай бұрын
Checkout how we add digital foil to print here: kzbin.info/www/bejne/fIili6Npp9qZbLcsi=JVfVQgt9gcEWKwMX
@ChrisCorkPhotography2 ай бұрын
if you would like to see the moonrise and moonset version of this tutorial than click here: kzbin.info/www/bejne/nJXPgYaona1prZo&t
@ChrisCorkPhotography2 ай бұрын
If you would like to see the sunset timelapse tutorial than click here: kzbin.info/www/bejne/nqayqaWlastsl5Isi=lXtCdSH_l5rF8eki
@ChrisCorkPhotography2 ай бұрын
If you would like to see how I create double thickness business cards than click here: kzbin.info/www/bejne/n4nIgKSOf6yWaq8si=0I4S0yYdSXzGl1pM
@ChrisCorkPhotography2 ай бұрын
If you enjoyed this then checkout my second drone feature here: kzbin.info/www/bejne/bKa2Z6OqdqZrqNEsi=oLcX2qSGwFTCzz1q
@ChrisCorkPhotography2 ай бұрын
If you like this timelapse feature then checkout my earlier one which got me featured on ITV and the local papers: kzbin.info/www/bejne/bHetmJl_p5d3Y5osi=jtucW83Lm0YorUaT
@ChrisCorkPhotography2 ай бұрын
If you would like to see an initial review and some sample video and images from this lens, then click here: kzbin.info/www/bejne/aJ3NaGB5rpaHosk&t
@ChrisCorkPhotography2 ай бұрын
Since filming this I have created a simple and almost factory fix for the lens creep issue, which can be seen here: kzbin.info/www/bejne/iF6ylaSwZdlqfqcsi=67Dee7uMIwvJYNhs
@bfs51132 ай бұрын
Yeah, we had used a Silicone rubber band to fix the first generation Nikon 18-200 DX lens' creep problem decades ago.
@ChrisCorkPhotography2 ай бұрын
@bfs5113 yeah I've seen the big bands you can buy too (lens band) but the O ring is almost undetectable and makes it look factory
@SCRNSH0T2 ай бұрын
Dude phenomenal! The lens shift has been the only downside of the lens because I adore it otherwise but I’m doing it asap. Great tip, good video.
@ChrisCorkPhotography2 ай бұрын
thank you, glad it helped!
@ChrisCorkPhotography2 ай бұрын
To keep up with my T5 photography adventures, hit subscribe: kzbin.info
@Wildridefilms2 ай бұрын
Even without lens IS, it seems to be stable enough at 150 mm
@ChrisCorkPhotography2 ай бұрын
Yeah. Only had mechanical stabilisation on too. Electronic would have added more but it would crop in a bit
@itsGAMiEАй бұрын
Great, I just ordered this lens and can't wait to use it with my S5iix. I was worried about the lack of OIS but seeing this video reassured me I made the right choice plus Lumix stabilization is the best in the game.
@ChrisCorkPhotographyАй бұрын
@itsGAMiE yeah I did this video with mechanical stabilisation and stabilisation in Davinci Resolve but if you turn on electrical stabilisation in camera it will crop in and do it for you in camera.