21 күн бұрын
2 ай бұрын
Пікірлер
@salty_berserker_channel 8 күн бұрын
How much?
@Subscribe2Glide 8 күн бұрын
@@salty_berserker_channel As a way to support my channel, a $100 tip on top of cost would be appreciated, cost is around $515 for the board I painstakingly designed, and about $600 for the foil I use. I can change board shape and size for you too!
@glibed 10 күн бұрын
did this help you learn pump foiling ?
@Subscribe2Glide 10 күн бұрын
@@glibed yes glib! Controlling the rolling degree of freedom helped a lot! Should i make a vid about controlling degrees of freedom?
@thatdeonguy 13 күн бұрын
GLIDE Are you still around? I am very interested in building this project
@Subscribe2Glide 13 күн бұрын
@@thatdeonguy ready to rock. Timber lock screws, 8x pl construction glue, if you need a foil let me know 🤙😁
@Subscribe2Glide 10 күн бұрын
@@thatdeonguy u build it yet? Where the vid? Foilscoot fastbuild fastlearn challenge, if you can get past 5 pumps i will give u a glide foils hat called power scooter pumper! Jk but maybe
@cygnus6623 14 күн бұрын
That looks like one heck of a workout...that is after you get your balance and rhythm perfected.
@Subscribe2Glide 13 күн бұрын
@@cygnus6623 💯
@wavergarage9098 14 күн бұрын
how many minutes can you hold on with this wing?
@Subscribe2Glide 13 күн бұрын
@@wavergarage9098 about 1 minute
@Mr.XL1Fe 17 күн бұрын
what is your weight ?
@Subscribe2Glide 16 күн бұрын
@@Mr.XL1Fe 200lbs
@bobbylinnes6254 20 күн бұрын
Marathon Dan! Looks fun except for the occasional "😂taco shell" C u on the water 💦🌊
@shciponjekrasniqi2918 Ай бұрын
im your firsr comment
@Subscribe2Glide Ай бұрын
@@shciponjekrasniqi2918 😉
@smotruns Ай бұрын
Nice
@Subscribe2Glide Ай бұрын
Thanks
@smotruns Ай бұрын
Nice
@waymondsingleton Ай бұрын
Almost ten years later...still saving lives 🙏🏾
@AdamsHadEnough 2 ай бұрын
I like your board, it looks like a carbon plate, can you tell me the specs? Thanks!
@Subscribe2Glide 2 ай бұрын
@@AdamsHadEnough i can sell u one for about $200. 28.5" long 13.5 wide. 4.5lbs
@AdamsHadEnough 2 ай бұрын
wow nice I kinda want to make one.
@Subscribe2Glide 2 ай бұрын
@@AdamsHadEnough i made a better one
@СилкинЮрийпетровичьСилкин 2 ай бұрын
Английский лазутчик хочет разведать наши тайны
@Mr.kitefoiler 2 ай бұрын
Nice, I also started making foil assist up to $800
@Subscribe2Glide 2 ай бұрын
Nice work! That's a great price point.
@Mr.kitefoiler 2 ай бұрын
Nice! Hello, can you measure weight only front wing 1401 please ? I want to compare it with my noname 1401. Thanks so much
@Subscribe2Glide 2 ай бұрын
Let me check
@Subscribe2Glide 2 ай бұрын
Float
@nitrous31 2 ай бұрын
Most important feature in cold days - Wet Hat, definitely help to stay warm XD Keep training bro
@Subscribe2Glide Ай бұрын
Always!
@Fjordjumper 2 ай бұрын
Which foil are you using here?
@Subscribe2Glide 2 ай бұрын
@@Fjordjumper art pro 1401
@Subscribe2Glide 2 ай бұрын
One of my first successful glides on the 14 0 1
@Mr.kitefoiler 2 ай бұрын
Nice. I'm bought the same and will try
@Subscribe2Glide 2 ай бұрын
Good luck, have fun out there.
@cgs4477 2 ай бұрын
My button seems to be stuck!
@RParent21 2 ай бұрын
Thank you!!!
@Liamvrgt24 3 ай бұрын
First
@sbrhossain-i3c 3 ай бұрын
Amazing ❤️🔥❤️🔥
@Subscribe2Glide Ай бұрын
Thanks!
@sbrhossain-i3c 3 ай бұрын
Amazing ❤❤
@Subscribe2Glide 3 ай бұрын
Thanks 😄
@sbrhossain-i3c 3 ай бұрын
If you want to get more views, subscribers on your KZbin channel then you can tell me. No matter how you upload the video, it will not get more views. I will help you get views organically. But why you hire a seo expert the reason is if you add your keywords by yourself then you don’t know which keyword will help you to get more views which keyword will good for you to rank your videos on the top level.
@Subscribe2Glide 3 ай бұрын
Thanks for the suggestions. Although I am not interested in hiring anyone at the moment, I did put a little more effort into this video by updating keywords and thumbnails.
@sbrhossain-i3c 3 ай бұрын
I really want to help you so please send me your contact details
@sbrhossain-i3c 3 ай бұрын
Hello Sir I’ve reviewed your KZbin channel and am really impressed with your content. However, I noticed some areas for improvement, like your thumbnails and tag usage, which might be limiting your reach. I’d love to discuss how we can work together to grow your channel.
@Subscribe2Glide 3 ай бұрын
@@sbrhossain-i3c Yea i would appreciate that discussion, how would like to work together?
@sbrhossain-i3c 3 ай бұрын
@@Subscribe2Glide ok please send me Your contact email or WhatsApp number than we Will discus about KZbin channel growing
@copperking8725 3 ай бұрын
Extreme!
@copperking8725 3 ай бұрын
Pay him KZbin, bitches
@copperking8725 3 ай бұрын
Kick ass brother
@Subscribe2Glide 3 ай бұрын
@@copperking8725 thanks king!
@huynguyenuc4365 4 ай бұрын
love it
@Subscribe2Glide 4 ай бұрын
@@huynguyenuc4365 THANK YOU!😁
@AlaskaBased 4 ай бұрын
😂
@MayarieSmith-mo8vp 4 ай бұрын
💀
@thatonegoose1490 4 ай бұрын
Real talk, what happens if you hit that one lump of sand
@Subscribe2Glide 3 ай бұрын
Hitting the sand causes a instant fall but if I get about 2 feet from the sand i get ground effect and that is way more efficient.
@MrJlcurl 4 ай бұрын
Just watches some of your precession video shorts. What wing are you liking these days? What do you weigh? I’m 210lb seems most folks are a bit lighter than me, so I’m just trying to gauge it. At this point I’m estimating I need a 2400 cm2 or bigger wing, maybe up to 3000. And span of 1300 to 1800. Thoughts?
@Subscribe2Glide 4 ай бұрын
@@MrJlcurl i like the axis png 1300 and the art pro 1401. A 2400cm² wing will be too slow and draggy because it will become too pitch sensitive above roughly 10mph. I weight 195lbs now but i started at 240lbs. I used to own a 2400cm² and a 2600cm² wing but i sold both of them. I am selling my axis png 1300 right now for $777 with the mast, fuse, and rear wing. I am selling so i can but a wing that is 100cm² smaller, the art pro 1401. The axis png 1300 has all the low speed lift of larger wings but it is a wing that is good at everything. Let me know if u have any other questions
@Subscribe2Glide 4 ай бұрын
@@MrJlcurl if interested, message me on CL so we ca talk about shipping "orangecounty.craigslist.org/spo/d/san-clemente-axis-png-1300/7789148775.html"
@MrJlcurl 4 ай бұрын
@@Subscribe2Glide I'll consider it. Thanks for all the info.
@Tvick1 4 ай бұрын
What foil is this on? Looks like an axis?
@Subscribe2Glide 4 ай бұрын
Yes, the axis png 1300
@DboyinDtown 4 ай бұрын
Nice
@Subscribe2Glide 4 ай бұрын
Thanks
@frederichominh3152 4 ай бұрын
Thank you for your videos, very inspiring. I like how you try smart, not hard,, exactly the way I do things. I will dockstart this winter and I wonder if using a scooterfoil first did help you ? I am convinced it did but won't it make you get bad reflexes when it's time to transition to a real board?
@Subscribe2Glide 4 ай бұрын
@@frederichominh3152 yea it helped at first to control the rolling axis but the end goal is light weight. Look up my tripod launch video for level 1 dockstarting.
@mattprovencal5450 4 ай бұрын
Hey! I was doing it like you for many tries until I saw a video where the guy was pushing foreward sharply on the bars . Now I'm getting 40 second runs.
@Subscribe2Glide 4 ай бұрын
@@mattprovencal5450 40s is a lot, wow!
@TokyoNightGirlLofi 5 ай бұрын
Nice!👍💗
@RayleneCawood 5 ай бұрын
Well!? I'm surprised and confused. But I think we can get this to work which will make your videos MUCH more popular! So lets do some science: When the mast moves through the water you have nice smooth laminar flow where the wing is getting thicker to the water flow, then flow turns turbulent (bad) where it starts getting thinner to the water. So you want to push the water out/away from the mast where its getting thicker then Attract it back where its getting thinner to avoid that turbulent flow and a big chaotic wake. Also do you know those Icey things? Frozen cooldrink in a plastic tube that when you squeese on the back of the tube the icy shoots out the open front..? Well we want that effect: squeeze the back of the mast so it shoots forward through the water..!? So Hydrophilic coating for the back,thinning again part of the mast..? To 'pull' the flows back together and avoid turbulent flow. If it works! and because you get an effect like squeezing on the back of an Icy I Then the foil itself: You want lift so try it on the high pressure bottom but not the top. You don't want flow separation on the top rear vacuum surface, so try hydrophilic there. Or just the same as the mast for pumping..? Simple masking tape or box tape should work to mask off the different areas. Perhaps a small neutral area between..? Hydrophilic: Here there's a product called RainX for windows that attracts water. This causes droplets to spread out in a thin film of water over the glass that you can see through like its just thicker glass, vs light getting scattered by droplets. On shades..? good luck! :) let me know.
@Subscribe2Glide 5 ай бұрын
@@RayleneCawood i like that you have the spirit of creativity, problem solving, optimism, and the willingness to test new things conceptually! I agree that the water needs to be attracted to the foil on some parts. My new wing comes stock as hydrophobic, so i could test it easily by sanding down only the trailing end to make the water stick to it, i could add my hydrophilic stuff to test to. I came to the conclusion superhydrophobic coatings create more, that even the stock hydrophobic coating was not ideal, so i sanded my mast down, my new wing is still hydrophobic so i will consider sanding down the trailing end only, basically the more the water sticks to the surface than the less water disruption which means less drag. It is interesting that the huge and long formation of underwater vortexes it creates all equal drag so if the water can return to its regular condition faster that means less drag. Thanks for coming up with ideas to test!
@IOSALive 5 ай бұрын
Glide, This is fantastic! I subscribed because I love it!
@Subscribe2Glide 5 ай бұрын
Thank you!
@paddleboarddog 5 ай бұрын
Is that board also doubling as a lunch tray?
@Subscribe2Glide 5 ай бұрын
@@paddleboarddog great idea! It would work as a table during lunch
@WakeThief 5 ай бұрын
Congrats! Welcome to the club!!!
@Subscribe2Glide 5 ай бұрын
@@WakeThief I will have to make a vlog, with the hat on, about the journey to get in the club because it was no small task! Thanks for the challenge and inspiration!
@braddbraddley516 6 ай бұрын
I mean that looks cool but I bet it gets old havin to pump your legs constantly to keep up.
@Subscribe2Glide 6 ай бұрын
@@braddbraddley516 yea i am try to learn to get into waves and put a 600W motor on it like a diy foil drive
@DeanMurray-x8r 6 ай бұрын
Sick track!
@MigelKarlos 6 ай бұрын
How it's working?
@Subscribe2Glide 6 ай бұрын
@@MigelKarlos its like an underwater airplane, jumping provides gravitational potential and the wings convert gravitational potential into forward motion. The body changes the angle of the wing to optimize lift and drag as the G forces go from 2 to 0 from jumping. Its like a pump track on land, push on the downhill, pull legs up on the uphill.
@АлександрСавельев-ч3э 6 ай бұрын
Физика...