Perfect and thanks a lot! Let's see if I can get it done 🙂
@AverageFPV2 күн бұрын
@@RockFPV im sure you will, let me know if you have any questions 👍🏽
@McLogo762 күн бұрын
Awesome build vid Sam! 👍🔥 Thanks a lot!
@AverageFPV2 күн бұрын
Can’t wait to fly together with your wing 👍🏽
@DanielSingerX2 күн бұрын
Very cool! I always wondered if building something like this was possible and here it is! What flight time do you get with that setup? I know the Walksnail VTX alone can finish a 1s battery pretty fast just sitting still
@AverageFPV2 күн бұрын
@@DanielSingerX i usually crash before I finish the battery but probably the same as a whoop so 3-4min
@mr_batch6 күн бұрын
Wow, cool rip dude! Nice flow! Nice Build!
@firebeastrcandfpv26896 күн бұрын
🔥🔥🔥 🎮
@RockFPV6 күн бұрын
Sick build and flying as always Sam!
@alexcook48516 күн бұрын
Long time wing flier, that was 🔥🤘
@AverageFPV6 күн бұрын
Thank you, much appreciated!
@SpacemanFPV16 күн бұрын
i wanna build this as i have 2s batteries left over from a quad, but with analog any tutorials
@SpacemanFPV16 күн бұрын
do i need a buck converter
@angelicgundam906 күн бұрын
Do you like this 1s build or your 2s build better?
@AverageFPV6 күн бұрын
Both are fun but if I had to choose probably the 2S. The 1S is pretty fun for tight spots, and I have many more 1S Lipos to take along, which is convenient 👍🏽
@McLogo767 күн бұрын
Bro, that was just awesome and sick flying🔥🔥💪🤣 - super crazy fun session 🙏
@theKeppis7 күн бұрын
Yeah, that's it, I need to get me one of these kits 😃 Having Kolibri smash the floor when the voltage dropped kinda was the last straw! EPP is the way 😎👌 Love that you could have chase footage of it, the best use of drones IMO!
@AverageFPV6 күн бұрын
These things are pretty durable and fun! Definitely try some EPP planes and wings 👍🏽
@theKeppis6 күн бұрын
@@AverageFPV the only problem was that I was not aware of that small of a pre-cut (Causemann) wing kit 😃Thanks to you now I know!
@sylfpvdiy79217 күн бұрын
Peeeeeerfectly perfect 👌👍👍👍 !!!
@AverageFPV6 күн бұрын
@@sylfpvdiy7921 thanks, pretty fun to fly around right spots 😁
@RockFPV8 күн бұрын
What a Ride! 🔥🔥🔥
@CGFPV8 күн бұрын
What a rip! 🤘
@AverageFPV8 күн бұрын
@@CGFPV and the wind!! 😆 fun times, hopefully this weekend is better 👍🏽
@McLogo768 күн бұрын
Awesome rip mate 🔥😉
@AverageFPV8 күн бұрын
@@McLogo76 thanks my man!
@nathanz720510 күн бұрын
Are those motor mounts 3d printed?
@AverageFPV9 күн бұрын
yes, simple motor mount brackets using PETG
@RockFPV19 күн бұрын
Crazy flying and Build Mate!
@AverageFPV19 күн бұрын
@@RockFPV thanks! Let’s fly together next weekend! 👍🏽
@angelicgundam9019 күн бұрын
How are the epp control surfaces? I wonder if youd see any improvement in response if the were made of balsa instead.
@AverageFPV19 күн бұрын
I've glued 1.5mm carbon rods inside, which make them stiff enough. not quite balsa but definitely flyable 👍
@onclefly845019 күн бұрын
TOP , j'adore
@AverageFPV19 күн бұрын
@@onclefly8450 merci! 🙏🏽
@Fabwize19 күн бұрын
Awesome bro.
@AverageFPV19 күн бұрын
@@Fabwize thanks! Now I need to go back to bigger wings 😁
@Fabwize19 күн бұрын
@@AverageFPV For me is a Spec ritewing or Vollstyle or Team Legit wing for freestyle proxy and Nanodrak for freestyle midrange , These are the wings that I prefer.
@McLogo7619 күн бұрын
Awesome build and flight Sam! 🔥💪 I'm really looking forward to build one too and flying. Thanks also for your help bro!
@AverageFPV19 күн бұрын
@@McLogo76 yes!!! Some chasing soon 🚀
@McLogo7619 күн бұрын
@@AverageFPV Affirmitive! 😁🔥
@butterflyfpv19 күн бұрын
Niceee!
@AverageFPV19 күн бұрын
@@butterflyfpv thanks my man! 😁
@mikebergman181719 күн бұрын
This is super cool. So glad you built it with twins. I am just finishing up a nano goblin twin prop with o3. I love how smooth they are with the counter rotating props.
@AverageFPV19 күн бұрын
@@mikebergman1817 nice! NG is a great little flyer, I have two as well and one of them has twin props 👍🏽
@theKeppis20 күн бұрын
Is there a reason why you use twin motor instead of one pusher? You just cut your motor time in half with this setup :D But yeah, tiny and micro wings are fun!
@mikebergman181719 күн бұрын
Prolly for torque roll and easy hand launching.
@AverageFPV19 күн бұрын
@@theKeppis mainly to combat torque rolling. It’s already hard enough to switch between quads and wings, but torque rolling kills me 😅
@theKeppis19 күн бұрын
@@AverageFPV I really haven't experienced much torque rolling on my mini wings, barely noticeable only when you're stalling and punching it :) Of course it kinda gives you yaw authority (or a wild spin!) with differential thrust. I should actually give it a try. I made a quad friend one wing, only advice I gave him was to keep enough airspeed until he gets used to it 😆
@AverageFPV19 күн бұрын
@@theKeppis good to know! 👍🏽 maybe for the next build 😁
@marielizysurourcq19 күн бұрын
@@AverageFPV In my opinion, the main advantage would be for small parks, when rolling is not enough and you want a bit of yaw
@FioreGiuseppe120 күн бұрын
does the modification work on goggles x with 2 fans?
@AverageFPV19 күн бұрын
@@FioreGiuseppe1 yes, had no problems the whole summer 👍🏽
Thanks Syl! Just a little diversion until I have my Lidl again :)
@sylfpvdiy792127 күн бұрын
@@AverageFPV 🤣🤣🤣👍👌
@offaxisfpv28 күн бұрын
very cool
@AverageFPV27 күн бұрын
Thank you, much appreciated! :)
@beratsbuilds28 күн бұрын
It's so cute and flies so well 😮
@AverageFPV27 күн бұрын
next up: 2S version :)
@theKeppis28 күн бұрын
What is the setup on this? DIY hotwire cut or a kit? :D You're on the rigth track. When are you gonna fly between your legs? 😎 Be the gate! kzbin.info/www/bejne/iHLZXpR9qtetmbs&ab_channel=Keppis 2S 500mm
@AverageFPV19 күн бұрын
@@theKeppis haha that’s great! Will try that some time! :)
@mikebergman181728 күн бұрын
Is that an epp kit that can be ordered? Or did you buy the plans for it?
@AverageFPV27 күн бұрын
You can buy it as kit (just the epp) here: shop-rc.causemann.de/Der-unzerstoerbare-NanoWing-40cm-Spannweite
@McLogo7628 күн бұрын
That seems to fly really well mate 👍 What is the flight time with one pack? 🔥👌
@AverageFPV28 күн бұрын
thanks! A bit more than 3 min, but I'll try 2" biblades tomorrow :)
@CGFPVАй бұрын
Haha wanted to powerloop you too during that same pack, but crashed out of respectfulness 😂Nice rip
@AverageFPVАй бұрын
@@CGFPV 😆😆😆
@onclefly8450Ай бұрын
Du scotch pour attacher les servos crazy boy
@AverageFPVАй бұрын
@@onclefly8450 haha 😆 but it holds!
@onclefly8450Ай бұрын
@@AverageFPV Oui scotch renforcé 👍
@theKeppisАй бұрын
First when I saw this I thought that's another take on the Mobula 7 Wing" but having a better look I was pleasantly surprised. I asked about the weight on facebook earlier, it was way lighter than I expected. Maybe it has to do the gull wing and those slanted (45°) winglets those make it a bit too stable and resist rolling. But this and the parking hall clips gave a bit more insight of it. This needs only little building to get it going.:)
@FabwizeАй бұрын
Awesome proxi fly bro.
@AverageFPVАй бұрын
Thanks a lot Fabwize! Perfect wing for smaller spots :)
@ShelbyVollАй бұрын
Wings in Parking Decks....It's been a while. Good Rip...keep rippin💯 🤘😎🤘
@AverageFPVАй бұрын
Thanks a lot! Finally a wing I can just throw in the backpack together with my micro quads :)
@McLogo76Ай бұрын
That was a fun short session today 👍 awesome 1s HD wing 🔥💪
@AverageFPVАй бұрын
Yeah it was! Luckily no wind and good weather 👍🏽
@marielizysurourcqАй бұрын
The vector wing foam is rather fragile, especially in the front !! I added a "foam bumper" in that regards
@AverageFPVАй бұрын
Agree. I filled the lipo slot with foam and added some nylon reinforced tape and it survived all crashes today 👍🏽
@marielizysurourcqАй бұрын
Incredible and very inspiring ! What is AUW ? I have this wing (in 2S since 2019, but stabilized with a CC3D and even FPV it a bit kzbin.info/www/bejne/b4awhmmCepeGipI ) and a 1S (Two motors in line from the first vector wing concept ) since 2018 !! I have a spare and a 3D printer ... so, very tempted to make that two one day. Just find or print a canopy when you can, like that, it's rather ugly. You'd also rather stabilize it or you won't be able to fly it with a bit of wing. It's very light. Btw, this wing does not like stall at all (so always put some speed and no too sharp turns).
@sylfpvdiy7921Ай бұрын
Looks very fun, impressive for 1s ! This thing flies well and fast 👍👌
@timeanspaceАй бұрын
Looks so good!
@mr_batchАй бұрын
Love it, cool Project! Flies very nice! And, of cause, the Custom Paintjob ;) (i have an such n Artist here, too)
@RockFPVАй бұрын
Awesome build Sam and it's hard to believe that this is only 1s! That thing rips