You left out the video of you on the grass hopper and the speed you were driving it.
@chipps10662 ай бұрын
That squealing would get old quick with me.
@jb69718 ай бұрын
Looks underpowered. You need a pto hydraulic pump with adequate lines leading to the cutter. This is a sorry demonstration. The way you're dressed says it all. Try again! 😢
@bryonmartin846311 ай бұрын
Thanks for showing the operation of the range and gear selection while working the loader/grapple.
@harolddenton603111 ай бұрын
I would take tiger cat II because it weighs less. But if I was cutting more overgrown rural properties I would buy the grass hopper with that big briggs engine for more torque to easily mow down very tall thick grass,
@terrytate6006 Жыл бұрын
Are you running return to tank option on your oil flow? This tractor has the built in-port
@JeffGeorgalas Жыл бұрын
Dude.........is your chain completely dull? Why is it taking you SOOOOOO long to cut through that little twig?
@colbyheffner4824 Жыл бұрын
What width Rotary mower do you have on the RX7320 in this video? Thanks.
@madtater5948 Жыл бұрын
thanks for sharing the video, what diameter size hydraulic hoses are you feeding the brush cutter with?
@YouTube_Censors_Me Жыл бұрын
If she blew the grass away from the uncut grass on the finish cut the scag would've had an easier time... I agree Grasshopper best zero turn made!!! Never ever cut the same grass twice!!!
@jamesgrubbs2448 Жыл бұрын
You need to know how to work the thing before you start doing a demonstration on video you idiot
@Jjason601 Жыл бұрын
Grasshopper nice
@rdking80012 жыл бұрын
How does that function with third function on front? Mine seems to be a momentary switch on the loader handle like to open and close a grapple
@imorgan6202 жыл бұрын
Where is the Vs? I d8dnt see the grasshopper mow.
@johnhalter83172 жыл бұрын
Have a 900D nothing but problems since purchasing, very poor quality machine. I had a 725D before it a great machine bullet proof for over 2000 hours but I needed the bigger tires on the 900 for wet areas. Low power machine and very undependable been in the shop for over a month while I mow with a30 year old Gravely. The factory support is awful but the dealer finally found the pulley that was machined wrong at factory eating up belts. If you want a Grasshopper buy one of the older ones and stay away from newer models. Sad when a company falls this far in quality.
@dlmp70 Жыл бұрын
Shocking to hear of this story. Thanks for sharing. I was under the impression that the 900D is about the best out there in terms of a zero turn front mount mower.
@leonardomigot-yn1ti7 күн бұрын
@@dlmp70 John Halter8317 detest every Grasshopper new one in fabbric
@Superintendent-iy9zv2 жыл бұрын
Our golf course had one of these. Decent machine, we switched to the ventrac. Ventrac will out cut these 10 fold!! Ventrac is expensive but you get what you pay for!!
@braddsn2 жыл бұрын
I have had several zero turns, and between all of my zero turns, garden tractors, and go-karts, I have ran about every engine known to man. The Briggs Vanguard is the best hands down in my opinion. They are rock solid, well balanced, powerful, and reliable. Also, Grasshoppers are nearly impossible to beat. I ran my last one into the ground for 10 years mowing 12 acres a week.... it was a 727k with a Kohler. I beat the heck out of it and it kept coming back for more. Never a problem with it. Now I have the model that is featured in this video (937 with 72" deck). It is a beast!
@michaelschettl95092 жыл бұрын
Doing this work in shorts & a pair of Jerusalem Cruisers, seriously? Lol.
@35goonyboy Жыл бұрын
You just wanted to say “Jerusalem Cruisers” didn’t you ? Bet you waited a while to use that one !
@equippededucator41062 жыл бұрын
Looks very cumbersome
@rdking80012 жыл бұрын
What is you flow at front connectors?
@shanepipkin40412 жыл бұрын
747cc is to small on 61 imo the kawasaki fx801 is 852cc it has torque and would use it before the big blocks kohler and briggs hp rating are not accurate like kawasaki theirs are very conservative
@arngreencare89552 жыл бұрын
I'm still running my 2003 725k. It doesn't have as much power as the one in this video however. Mine has the older CH730, which they later rated it at 23HP. When it dies I'm gonna drop the newer 747cc engine on it...
@alejandrolemus8482 жыл бұрын
Qué tal, excelente trabajo!! cómo recogiste el césped cortado?
@sharkymitten2 жыл бұрын
The hydraulic flow on that is probably woefully under the requirement for that unit.
@terrytate6006 Жыл бұрын
His tractor it's rated at 19.2 gal per minute. He's got plenty of flow
@madtater59482 жыл бұрын
thanks for sharing the video. your tractor puts out almost 20 gallons per minute on the hydraulic flow. do you think the tractor has enough power to drive your mower?
@herman5eight3 жыл бұрын
Briggs are junk...............the hopper body is not very eye appealing
@Chad-h5l3 күн бұрын
Lmfao. Vangaurd big blocks are not junk. You know what is? Kawasaki 1000 series, complete shit. Maybe do research on kawasaki recent struggles.
@madtater59483 жыл бұрын
I keep hearing a squealing noise in the video is that a belt making that noise or is it just a normal noise the machine makes?
@macaw1us3 жыл бұрын
When I saw the Flip-Flops I knew you were a Moron and left...
@eddie_lee65873 жыл бұрын
I’m a scag fan but I like them both
@louisgarden38883 жыл бұрын
So you say the Grasshopper beats the Scag? Well put some Kavli blades like Mike from Something 2look at has maybe there will be a difference. May I also add ,not being rude, it's not the mower that cuts the grass that is only the vehicle. The blades do the cutting and yes some mower decks help cut a little better and some don't. I still liked the video with it's comparison.
@bobcat13 жыл бұрын
What diameter trees is he cutting. I can cut down 8 ft sapling with my pocket knife if they are skinny.
@masonlynch17933 жыл бұрын
Try cutting down 1 acre worth of 8ft saplings with a pocket knife.
@woofy5483 жыл бұрын
Every major manufacturer makes a nice mower. Doesn't matter if its Scag, G.H. , Hustler, Exmark, Toro, JD , Wright..... They're all making nice machines right now. But Ive personally gone strictly Grasshopper. The build quality and dependability are in incredible.
@MARKC0R33 жыл бұрын
How’s the suspension?
@jacksmith3753 жыл бұрын
Both cuts look the same to me
@Alvin-in3zt3 жыл бұрын
Whats the name of that song
@roweingram27023 жыл бұрын
Hometown girl by josh turner
@jim3518613 жыл бұрын
Ear muffs and flip flops. Safety at its best.
@FlyingEvangelist2 жыл бұрын
Keep you mouth shut. If you don’t have anything good to say, don’t say it.
@alanwhite7310 Жыл бұрын
Millennial farmer
@golfer9633 жыл бұрын
You should use your blower on the grasshopper deck to keep the spindle clean and to run cooler
@royalway123 жыл бұрын
Do those hold the hills better than a regular zero turn?
@rrlawntractorsport64433 жыл бұрын
They do not! Mid mounts are way better at handling hills!
@EronIler3 жыл бұрын
Any trouble with debris coming at you? Where did you get it? I like how you can trim the limbs in front while bush hogging in the back. It would also be super easy to mow under trees going forward.
@rrlawntractorsport64433 жыл бұрын
No debris with me! I got it at Reds Outdoor in Poteau Oklahoma! I get all of my echo, Grasshopper, kioti, and Modern ag stuff there! It does wonders on certain applications!
@cihamarketing30253 жыл бұрын
Check out this Lawn Mowing channel and don't forget to SMASH that SUBSCRIBE button kzbin.info/www/bejne/m5Wwqp9roNBnmrs
@houndsmanone45633 жыл бұрын
Dang, what the heck was that super loud squeal? I think you need to call Pathslayer and let them know you've got squeal problems with your setup. Yep, sounds like you don't have enough hydraulic fluid to operate the cutter and the tractor FEL, simultaneously. Very similar if you had low hydraulic fluid and you were trying to do FEL work. Hydraulic fluid flow issue. I'm thinking your tractor hydraulic fluid pump is not enough to power everything simultaneously. Go to either Trail Blazer or Quick Attach and purchase an independent 3 point hydraulic fluid pump system that will pump fluid directly to your front cutter and not interfere with your tractor's existing hydraulic fluid pump system to operate your tractor. Trail Blazer has a hydraulic power pack that cost $1700-ish that will provide approximately 8 gpm fluid to your cutter. The Quick Attach 3 point pump system cost $3,500 to $4,000. This was just my quick observation as a viewer without seeing your set-up. If it's not a hydraulic fluid flow issue, then check that noise out. Thanks for sharing this video and glad I saw Pathslayer's cutter (that noise changed my outlook about a Pathslayer). 👍🏽🙂
@rrlawntractorsport64433 жыл бұрын
It ended up being my tractor, I had a small needle size whole somehow in my cooler which was reducing my fluid and power! Didn’t know that’s what it was until after I made the video! Also, it was a little low Sae 90 fluid in the pathslayer from factory so added more and it worked great! That was only my 2nd or 3rd full time to use I believe!
@houndsmanone45633 жыл бұрын
@@rrlawntractorsport6443 Glad you found the culprit, R&R L&T. Be safe out there.
@joshsalmons18673 жыл бұрын
The tiger cat 2 is also over 10,000 after taxes.
@axeman333333 жыл бұрын
Got 2 of the 937g’s that are beasts. Love them. First I bought 725D’s and didn’t like them at all. They bogged down much more than gas models and radiators clogged badly every 2-3hrs. Luckily they let me return them and get the 937g’s.
@mattseal29483 жыл бұрын
What grapple are you using?
@rrlawntractorsport64433 жыл бұрын
Armstrong grapple! Forgot the actual name of grapple but we call it “root grapple because it’s good for getting up small tree roots.”
@coolmoodee3 жыл бұрын
Been in the lawncare game since 86. I own a tiger cat 2 and a Vride 2 and about to add Turf Tiger . Grasshopper is nice but I like the front mounted deck more . Going under bushes and split rail fencing and such .
@mowingman8163 жыл бұрын
Ah man gotta love them grasshopper mowers! 1st built in 1969! Moundrige Kansas! These things are built tough! Great video my friend!!! 👍👍
@boltactionshooter3 жыл бұрын
Everyone is copying the Lane Shark it seems.
@co10033 жыл бұрын
Should of demoed a comparable Scag...The Turf TIger cuts better than any Grasshopper.
@anthonyremley15753 жыл бұрын
Turf tiger has the same deck as that tiger cat. Both cut identical. I’ve owned grasshopper and scag and I’d take a grasshopper any day of the week. Scag is my second favorite mowers though.
@co10033 жыл бұрын
@@anthonyremley1575 Turf Tiger is available with more h.p. There are so many variables that affect cutting. Dull blades & improper deck adjustment are just a couple. I wouldn’t even put grasshopper in my top 5...But opinions are like assholes, everybody has them.
@woofy5483 жыл бұрын
You can't beat the quality of grasshopper and their customer service is second to none.
@co10033 жыл бұрын
@@woofy548 maybe 20 years ago…
@Sam-fw4pf3 жыл бұрын
What part of the country are you in? I'm thinking about going to the front mount mower myself.
@rrlawntractorsport64433 жыл бұрын
We are in western Arkansas eastern Oklahoma!
@jasonmiller46023 жыл бұрын
Thanks for the informative video. We just purchased one as well. Do you know if the squealing sound at engagement in your video at about 7:55, 11:05, 14:10, etc , is normal? Ours does the same thing on a John Deere and was/am concerned that something isn't "right"? Now we hear yours doing the same thing. Do you know what that squeal is? And is it OK? Thanks.
@rrlawntractorsport64433 жыл бұрын
Jason, make sure that ur machine has the gear sae 90 lubricant in it! They do not put it in the reservoir from factory, or at least mine didn't! Once I filled it didnt squeak as much and has cut a lot better now, as it should! Also, make sure your RPMS are higher on the initial start! Hope this helps! I've had to learn from experience with this machine!
@jasonmiller46023 жыл бұрын
@@rrlawntractorsport6443 Thanks R&R. Will do. We did make sure it had gear lube in it, but not sure if it was 90w. Will check. And find your comment interesting about RPMs, because so far the only way we can engage it without the squeal is very low RPMs and then ramp them up after engagement. But we have not even used it to any extent at all yet. We'll start playing with it and see how it goes. Thanks again.
@heathalford47212 жыл бұрын
What’s yalls long term opinions of this cutter? I read where one guy said his fell apart very quickly. It looks solid to me