Is the bottom part of the drls connect to the top part? Or is it separate? The bottom of my drl is dim but the top is bright.

Thanks so much for sharing this fix, I had this same issue and drove for quite some months like this, which also caused the problem with that “burn” stain to be even deeper in the tube and the yellow light was also worse than yours. I managed to remove that spot with the Dremel and wet sanded the end of the tube. Now it’s looking like new again! In the Netherlands a light unit like this (1 pcs) go for 2500,- and for that price it’s not even installed yet!! So the advice for everybody who encounters this would be, start this procedure asap and you’ll be fine. Thanks again! 💪🏼

Hi . Ho did you remove front cover? i have same issue on my Lamp. trying to do it by my self . can you help me on that ?

ho did you remove front glass of the lamp ?

Hello, i have p2006 but when I check the linkage its springs right back.. any suggestion of cleaning maybe the linkage with a degreaser

Hi can I have that broken head lights

Good

Gran Turismo 2, I think you NFS players meant

🔥

Ppl don’t know

Catless?

Hi it there another module for the bottem drl tube.

Thanks so much for the video! It is really easy to follow and saved me a ton of money. I have had to do this a few times since the tube seems prone to melting/burning. Can you provide more details on how you cut off the end of the tube? I can’t really get a razor blade in there due to the tiny space and it gets increasingly harder every time I do it due to the tube getting shorter. I have also tried to sand it down manually but it takes so long and isn’t very effective.

Will this work on a c7 rs6?

Is this same for A6 c7.5 2015??

Whatever happened to the purple viper

Hi. We have bought this item on Aliexpress. The tubes was nearly 8mm that I have got delivered, but this tubes in the lamp is around 6mm. Can anyone tell me the dimension on the ones that you have replaced? The car is a A3 from 2017. Or can anyone help me with a link to the correct part? Thank you.

Only tutorial I've found that explains it clearly. Well done!

I have a P2006 code on my 2007 C230. I had that runner part replaced once before. My Question is would it be smart to use a aftermarket part that made out of metal?

Can’t wait to try this on my 2017 Q7 LED Headlights. Thanks for the tip 👍🏾

Wish Microsoft would put this in Forza games.

Cold start rev is crazy..🤡

Because is China in her eyes.

What a totally shit design!!!

Can I buy new after market headlights and just use the original modules? Or once removed I have to reprogram the modules?

Come hai fatto a togliere il vetro del fanale

Thanks for this info wish you could do this for me.

Does this work on Mercedes as well?

I cant find a DRL module for my audi a6 c7… keeps coming up with a fault but they are working. Tried deleting the codes but didnt work. Just want to replace the module see if that does the trick

Thank you soooo much for posting this. I did the fix with this video. Thanks again !!!

Hi there yesterday my Porsche Cayman window went half down and wouldn't go up unless I helped if Now it is stuck looks like a nightmare of a job bro.. How much labour will I have to pay roughly is it an hour's work?

I also found that it may not be necessary to bake out and remove the LED tube. if you can clean off the yellow from the end of the tube without removing it - even if the end of the tube is not perfectly smooth - it restores the brightness....as long as you also make sure the LEDs are cleaned up (see my other comment) in order to get back to a white color

First off....EXCELLENT video. Thanks. This helped me repair my 2018 A3 DRLs. I found that if the LEDs are not burned out but only yellowed due to melting of the tube you can clean off the yellow with rubbing alcohol or similar solvent cleaning product. If you get them clean it restores the white color and no replacement is needed.

How do you know that the intake was bad?

If I can only have one dream car, this will be it.

I have done the replacement myself and after that .. everything is working apart from the fact that when I put the window down it's not stopping when is close to the end it goes all.the way inside the door and if I try to get it up again is hitting the inside of the door and won't come out again,unles I put something in and try to guide it up again...apart from that is ok...have any ideas what to do?Thank you!😊

Hey thanks for this video. What about the bottom tube? Is it the same one as only the bottom one is off in my case

Thank you ! Caould u show us how the polishing works ? Great content

Hi, thanks to your video I understand how this hydraulic valve blocks function. Do you think any company still rebuilds those?

@1:33 what is the part no. of that chip in your hand ?

Salve. Ho lo stesso problema alla mia Audi A3 sportback 1.6 CV 110. Due fari, prezzo €. 1.800,00 x 2. Ma vedo che si possono riparare. Mi aiutate a capire con un video in Italiano, come fare e quanto si spende. Grazie.

Its a Matrix Led ? O full led ?

lol no pad needs to be braked on hard when new. all pads need to be eased into. Coming from a 35+ year rotor and pad service and salesman

MARK MY WORDS I WILL BUY THIS CAR ONE DAY.

Great video, thanks 👍

Brilliant video, thanks so much 👍

brought my S3 with exact same problem to Audi. they explained me the same.. LED burned they replaced it for 300€ but that did not help obviously. so they want another 2.2k to replace a headlight... thank u sir for that video

🔥🔥🔥

Is the c63 stock?

Do 2018 a3’s s3’s and rs3’s all have compatible headlights?