shove that diode a little bit deeper into the metal for more plasma torque
@shalukothari2907 Жыл бұрын
What is the cost . Can it be used in Windsor multilayer plant
@davidzhao6205 Жыл бұрын
请问皮料表面有手感剂,印刷附着力不行,等离子处理可增加附着力吗?
@abumoslemtamer7331 Жыл бұрын
حفظ الترجمة Is this technique useful in cleaning telescope mirrors before coating them with aluminum in the vacuum chamber?
@njeoey62762 жыл бұрын
if the plasma treatment is coated with aluwire (metalise process), what is the condition of the plasma treatment?? did the plasma treatment disappear because it was covered with aluwire???
@njeoey62762 жыл бұрын
if the plasma treatment is coated with aluwire (metalise process), what is the condition of the plasma treatment?? did the plasma treatment disappear because it was covered with aluwire???
@njeoey62762 жыл бұрын
if the plasma treatment is coated with aluwire (metalise process), what is the condition of the plasma treatment?? did the plasma treatment disappear because it was covered with aluwire???
@njeoey62762 жыл бұрын
if the plasma treatment is coated with aluwire (metalise process), what is the condition of the plasma treatment?? did the plasma treatment disappear because it was covered with aluwire???
@njeoey62762 жыл бұрын
if the plasma treatment is coated with aluwire (metalise process), what is the condition of the plasma treatment?? did the plasma treatment disappear because it was covered with aluwire???
@md.shahid01642 жыл бұрын
Thanks for information
@sanjeevpatil39812 жыл бұрын
what should be the corona value for digital hp indigo printing ink before lamination process
@ashishsalunkhe64992 жыл бұрын
Why do the Aluminium roller/idle roller(in Blown film extrusion) turn yellowish after treatment? Is it due to oxidation or does it causes corrosion?
@PSEQ20002 жыл бұрын
Is it just me or does the video have no sound?
@Dragon-Slay3r8 ай бұрын
The web fell in slow motion What now! Deploy thambu bambu situation? Or the hitman leg? 😭😂
@KrishanKumar-gs6en3 жыл бұрын
What is a reason of break ceramic bar.
@humayunharoon42384 жыл бұрын
How we can discharge Corona Corona treatment from bopp film?
@techplcburner4 жыл бұрын
Any effect crona flame contact with matel
@illegalclub4 жыл бұрын
What kind of material should exhaust blower pipeline be ? Galvanized material or stainless steel ( because of corrosive gases like ozone)
@EnerconIndustries4 жыл бұрын
Stainless Steel , Aluminum and PVC are recommended exhaust duct materials. If you would like more information on best practices for installation please call us at 262.255.6070.
@MahendraSingh-vn7kv4 жыл бұрын
Thanks sir sharing this video ..... Enercon Asia Pacific system Doing such a Great work in Integlio process I hope sir share next video soon I m interested in sarface treatment thanks sir.
@dharamvir92695 жыл бұрын
What is the reason treatment trip in running for a second and how we can rectifie it
@ashishsalunkhe64992 жыл бұрын
Does overtreatment create creases in film? I have been facing such problem.Is it due to overoxidation? Or maybe due to film getting heated up?
@davej16225 жыл бұрын
Wow, what a huge difference this makes in printing. Looks like this is a great solution for WAGO.
@alejandrogarcia64246 жыл бұрын
Hello, can a corona treater be turned on and put into operation to check the operation of the electric arc, without moving the roller?
@EnerconIndustries6 жыл бұрын
Thank you for your question. It is not recommended to operate the corona discharge when the roll is not turning, since this is one of the key safety interlocks that must be satisfied prior to operating. Bypassing the zero speed interlock will put the ground roll covering at risk of damage. If there are further questions, you may contact our service department directly at [email protected], and please advise the system serial number from the Enercon rating plate.
@ashishsalunkhe64992 жыл бұрын
It can be done but as "Enercon personel" said if you do so the insulation/silicon sleeve over the ground roll will get damaged.
@hasansiddiqui13376 жыл бұрын
Is this AC electric discharge or DC electric discharge
@hydrocarbonsinternational24209 жыл бұрын
Hi, will this machine suit for HDPE bottles pre treatment for pad printing. Please reply me.
@markplantier26939 жыл бұрын
ahamed jalaldeen Yes, this flame treater effectively treats HDPE to improve ink adhesion for pad printing. Please provide us with your contact information if you are interested in receiving more information on this flame surface treating system from Enercon-www.enerconind.com/treating/flame/flame-plasma-objects.aspx