@@6Gawd believe it's classed as a B57 with it being a diesel.
@parmindersidhu9690Ай бұрын
Hi i tried using heavy cut compound on my gloss black pillars but i still see some swirls i used heavy cut an a foam pad how do i remove
@customcreationsdetailingАй бұрын
Need to use light pads and compounds to refine down. The pillars are very sensitive and need lots of refinement.
@josikiuАй бұрын
Nice paint job on an ugly car
@customcreationsdetailing28 күн бұрын
True beauty is in the eye of the owner. We help them to experience it's potential.
@mhryciuk0785Ай бұрын
HORRENDOUS
@martintongper67032 ай бұрын
My love, and my dreams Land Rover ❤❤❤
@sunrise5602 ай бұрын
and the A, B and C pillars on the left-hand side are white, but black on the right-hand side. you didn't notice that? Very professional....
@customcreationsdetailing2 ай бұрын
This was during strip down and prep for the wash and decontamination stages. Some of the protective trim had been removed before filming started.
@sunrise5602 ай бұрын
@@customcreationsdetailing Thank you - that's what I suspected.
@leo-nj7cc2 ай бұрын
Ask them to fix the leaks from the front windscreen and roofs everyone I know have got rid
@Rj_edits_qh2 ай бұрын
kzbin.info0-CeFe8RWok?si=7fv_OcciArOknojR check out this range rover sv edit
@marcooliveira5773 ай бұрын
Ugly
@JohnButler-iq8rl3 ай бұрын
Stunning sleeper estate----drove one recently and its mid range performance was eye widening 😊.
@Thealpine924 ай бұрын
Thats a nice golf, what colour is that.
@customcreationsdetailing4 ай бұрын
Porsche Rubystone Red.
@mitchrich64 ай бұрын
I have heard Ferrari have the worst paint out of factory. Me personally i just keep the windshield clean and keep the car properly serviced. I realised keeping the car scratless or spotless, that i was loosing my mind.
@craigbennett51324 ай бұрын
With good protection and the right techniques it's certainly easier to keep it scratch free 👍
@masgerb4 ай бұрын
😉 Excellent car, Mini Cooper! In Russia, they love these crumbs very much!
@JFF-CarEditzz5 ай бұрын
disgusting
@davidrpriest6 ай бұрын
It's a 2024 model. Hope to see it when finished.
@customcreationsdetailing6 ай бұрын
Here is a link to the finished car on our Facebook page. m.facebook.com/story.php?story_fbid=pfbid02Nms2mzFvXkfDePzkb47jkdAiioornWmC4AbX8baXjoq7by3Ak2Y4QudGdDEw3nQml&id=100063898511835
@emmetharte37186 ай бұрын
Great job on the car looks amazing 👍
@customcreationsdetailing6 ай бұрын
Thank you. Always very rewarding bringing an older vehicle back up to scratch.
@camillobonini49758 ай бұрын
KZbin uguale a Terrorismo
@MrGrentch8 ай бұрын
That's a lovely job on a car in fantastic condition. I wish mine looked that good. 😁
@customcreationsdetailing8 ай бұрын
We have worked on this car as part of a team effort. The front wings and rear quarters have had rust repairs carried out and then we took it on from there. Always great to help keep another one on the road in great condition.
@MrGrentch8 ай бұрын
@@customcreationsdetailing Yeah, they can be a right bugger for the tin worm. I got mine from Japan in 05. Thought I'd only keep it for a couple of years, but held onto it almost by mistake. 🙂 I'm in Ireland, so like you guys in the UK rust is an issue. So being paranoid, a week after it first came in, I filled it to the gunnels with anti rust wax and check and re-apply it every summer. I swear at this stage I'm paying for waxoyl and Bilt hamber's(V good stuff imho) kid's first house deposit. 😁 But it has worked(touch wood). I reckon I've one of the few such R's in these islands that has escaped the welder's torch(touch wood). And it's my daily driver, living outside in all weathers as we speak. TL;DR? one helluva team effort and a fantastic result. it looks like new. Major kudos to your team. 👍
@hesham33268 ай бұрын
🖤🌚🖤 Audi 🖤🌚🖤 . 👁️🗿👁️ 👀 . 🕶️ ❤ .
@kwstaskwstas74409 ай бұрын
Hallo. If you get a stage 1 program, do you lose the warranty from Toyota?
@customcreationsdetailing7 ай бұрын
Hi this is the first stage of the paintwork enhancement. It isn't remapping the car.
@streakfighter9 ай бұрын
Hi
@chegekinya24549 ай бұрын
luxurious powerful RANGEROVER
@customcreationsdetailing9 ай бұрын
Certainly an absolute beast.
@chegekinya24549 ай бұрын
oooh yes it is
@chegekinya24549 ай бұрын
@@customcreationsdetailing ooh yes it is king of all land Rovers
@AplicareAbdulKarim-bx7tq9 ай бұрын
F
@burkohara554910 ай бұрын
❗ "Promo SM"
@MdAmin-yl8gl Жыл бұрын
Veery nice
@MikesMobileValet Жыл бұрын
Nice work 👍🏻 😃
@jordaneasson3910 Жыл бұрын
Top notch as ever 👌👌 really going that extra mile
@customcreationsdetailing Жыл бұрын
Thank you Jordan 👌💚
@arthur-bishop22874 жыл бұрын
That looks bloody great mate!
@customcreationsdetailing4 жыл бұрын
Many thanks for that 💚
@leetrenam80055 жыл бұрын
Looking great Andy, 3 super blue M BMW's. Only mine to do now out of the 3!!!
@mickrobo29156 жыл бұрын
placed an order with custom creations after seeing the bike wash video on YT. great advice guys, keep it up.
@customcreationsdetailing6 жыл бұрын
mick robo Really appreciate the feedback chap. Many thanks 🙂
@MohdRadhwan7 жыл бұрын
I'm quite confuse with their iron remover product. There is another one call FeRRUM Fallout Remover which is also iron remover. So which one is the latest iron remover from KKD?
@customcreationsdetailing7 жыл бұрын
+Radhwan Ferrum was created to offer a cheaper alternative to Iron Rain. Ferrum wont dwell on the vehicle as long as Iron Rain will but can still offer a very effective fallout removal. Many trade users prefer Ferrum due to the amount they use.
@customcreationsdetailing7 жыл бұрын
Iron Rain v3 is the newest product. Ferrum was basically a product that came about when Iron Rain was being created but was never released until recently.
@MohdRadhwan7 жыл бұрын
I see. Thanks for your detail explaination.
@dedge128587 жыл бұрын
Nice vid. I'm thinking about buying a jet wash for bike/car cleaning. What brand and spec would you recommend that would be compatible with this lance kit? Cheers!
@customcreationsdetailing7 жыл бұрын
Doubleplusgood Hi. A basic Karcher would be a good starter setup. Ideal for the beginner and simple to use. Many on offer this time of the year. Look out for a K2 Home or Compact.
@dedge128587 жыл бұрын
Thanks very much for the quick reply!
@piotrwojcik17567 жыл бұрын
don't rub towel across the surface hehe you didn't only only flat surfaces , but all doors and arches pillars you done it and as we know these micromarring is most visible on that panels.
@customcreationsdetailing7 жыл бұрын
Piotr Wojcik There is no rubbing on any panels. If you watch the clip at a slower speed you will see this. The towel is patted in all areas.
@Erevoking7 жыл бұрын
hi mate i have recieved my regloss kit, one thing i want to know, is it ok to use on the plastic parts of my bike?
@customcreationsdetailing7 жыл бұрын
Martin Young Hi Martin, yes you can. Make sure you give everything a good wipe over after.
@Erevoking7 жыл бұрын
nice, one thanks, so impressed by this stuff! looks super shiny lol :D and covering up my stupidity swirl marks too! :D
@Erevoking7 жыл бұрын
think you might have missed the end of my last qeustion about the polish/wax as i edited it to add the extra question lol " i would like some kind of after finish for after washing and rinsing, as in a polish or wax, what one of your products would you recommend and what microfibre cloth to apply/buff? thank you again and sorry to pester you lol, nearly ready to hit that order button lol :)
@customcreationsdetailing7 жыл бұрын
Not a problem at all. We are here to help. Personally for easy of use id recommend the highly popular ReGloss Kit. It includes all you need and will help cover up the minor swirls you mentioned.
@Erevoking7 жыл бұрын
thank you mate, ill go for the ReGloss kit then :)
@Erevoking7 жыл бұрын
im a 1st time bike rider, i have a new honda pcx 125, i hear a lot of people saying do not use a jet wash but its obviously fine with the results your getting, just a pointer where should i avoid when jet washing mate? thanks for all your help, i will be spreading the word about your products to my friends/family/co workers :) one more thing mate, i would like some kind of after finish for after washing and rinsing, as in a polish or wax, what one of your products would you recommend and what microfibre cloth to apply/buff? thank you again
@customcreationsdetailing7 жыл бұрын
Avoid the ignition area and firing straight at the dial area and any electrical connections on show around the engine area if you don't have any fairings.
@customcreationsdetailing7 жыл бұрын
Well worth a watch... kzbin.info/www/bejne/n3uYfqd5btF-jK8
@Erevoking7 жыл бұрын
awesome thank you ever so much! just going to bed so will be watching all your vids tonight lol :)
@Erevoking7 жыл бұрын
brilliant thank you
@Erevoking7 жыл бұрын
also what micro fibre drying cloth do you recommend for drying? as you have a few on your website, i love all your gear and will get a karcher jetwash is necessary for the foam lance, loving your gear mate! i washed my brand new bike for the first time last week and i all ready have swirl marks!!! :( i hope i have not all ready ruined the finish :(
@customcreationsdetailing7 жыл бұрын
+Martin Young We highly recommend the Liquid Elements Silver Back XL Drying Towel. Its the one we use for customer vehicles. Thanks for your positive comments. :-)
@Erevoking7 жыл бұрын
Custom Creations (UK) Ltd Thank u mate will be ordering very soon!
@Erevoking7 жыл бұрын
i do not have a jet wash, can this be atatched to my garden hose instead?
@customcreationsdetailing7 жыл бұрын
Hi Martin. Unfortunately it needs to be connected to a jetwash to work correctly. You can pick up a Karcher K2 at a very reasonable price from many retail outlets.
@Erevoking7 жыл бұрын
thanks buddy! will be getting a K2 from john lewis at retail they are £59 there and with my wifes staff discount of 25% its a bargain, thanks for the quick reply
@customcreationsdetailing8 жыл бұрын
Hi Rhys. We are currently working on loads of clips for our KZbin channel and can add that onto our ever growing list. If you haven't already, subscribe to the channel and get updates when we upload new clips.
@MrBennettJB9 жыл бұрын
Incredible.
@Porchec110 жыл бұрын
Oem recirc still on or has that been changed?
@customcreationsdetailing7 жыл бұрын
+Porchec1 Turbosmart Recirc value and Turbosmart Actuator.