Пікірлер
@FinsburyPhil Ай бұрын
Great result
@andrzejp4207 Ай бұрын
Nakleiłes oznaczenia jak dla Norwega a nie Czecha;) (obrócone o 45 stopni ;) )😊
@Paulvanacker1 3 ай бұрын
You can't use montex masks on ICM kits if they are for a revell kit. each mask set is designed for a specific brand and it will tell you that. All brands are different, one size does not fit all, unless the brand is a re-issue from another brand using the same molds. ICM are new tool and will require specific masks, as you saw, with the eduard set. Nice build btw. :)
@chriswilson9720 3 ай бұрын
That was great to watch .the cam looks awesome
@leoncsorba9085 4 ай бұрын
Excellent work sir.....❤
@goforitpainting 9 ай бұрын
Looks cool.
@devensega 9 ай бұрын
Great video mate, I’m looking into getting Eduard kits and watching this has confirmed their quality for me.
@scalemodellerbyaccident8671 9 ай бұрын
Thanks, definitely, you won't be disappointed with Eduard's models!
@lesthiele4921 9 ай бұрын
Thst was a great build, your paint and weather was perfect, congratulations on a job very well done, best regards from Australia, Les
@scalemodellerbyaccident8671 9 ай бұрын
Thank you so much, sir!
@Dancing-Brush 9 ай бұрын
Cheers my friend! Very nice build
@scalemodellerbyaccident8671 9 ай бұрын
Thanks for the appreciation 🙌
@paulpaints...plastic7234 Жыл бұрын
I'm glad I watched your video because I will be giving this kit a wide berth. The fit was terrible and the extent of putty use was unbelievable. Well done for keeping on going and you got a terrific result but I would have binned it when putting the wings together.
@redartps Жыл бұрын
You should add 🔻🔻🔻💥🔥🔥😁
@dtrain1634 Жыл бұрын
Stowage on the roof of the rear ramp? Might be too much for the ramp jacks? That bit lifts up I think? Might be wrong 😮 Great model btw :)
@Smolensk18 Жыл бұрын
Si realizas una tutoría por favor escribe los colores que se utilizan, eso es muy importante
@Poopster4U Жыл бұрын
After using Tamiya and Valejo paints, it's hard to adjust to this AK stuff.
@d_jamd_jam1193 Жыл бұрын
SUPER !!!
@lesthiele4921 Жыл бұрын
That was a absolutely amazing build, you really brought out the look of the actual vehicle, best regards from Australia.
@scalemodellerbyaccident8671 Жыл бұрын
Thank you, sir!
@Dancing-Brush Жыл бұрын
07:16 awesome! It's been a long time my friend!
@scalemodellerbyaccident8671 Жыл бұрын
Yeah, the model has been finished at the beginning of January but editing of the video took me so long.
@sebasnado4717 Жыл бұрын
Nailed it my friend! It looks absolutely amazing! I enjoyed you series on this subject, I myself am a modeller, I only build russian armour lol so just wondering if youre going to build another "russian" based vehicule in near future?
@scalemodellerbyaccident8671 Жыл бұрын
Wow, thanks! I have some Soviet/Russian stuff in my stash, mostly from MiniArt but I am not planning to put my hands on it quick.
@sebasnado4717 Жыл бұрын
@@scalemodellerbyaccident8671 all good! Oh and those miniart kits are huge kits kind of intimidating or over complicated. Cheers my dude!
@az09az0909az 2 жыл бұрын
effettivamente il montaggio della fusoliera completa è molto complicato,mancano i riscontro,oppure sono molto piccoli e non sufficente a tenere in linea tutto,pure il montaggio delle alli alla fusoliera,sula fusoliera qeuei piccoli pezzi sono insufficenti,e le ali tendono a passare sotto
@scalemodellerbyaccident8671 2 жыл бұрын
Zgadzam się, ogólnie ten model w pudełku robi bardzo dobre wrażenie, ale czar pryska gdy zaczynasz łączyć ze sobą główne elementy. To jak kobieta, która świetnie wygląda na Tinderze, ale na randce okazuje się być... nie taka jaką się przedstawiała :)
@keithsmodelsandrcs6593 2 жыл бұрын
hi how you iv seen on few vids yours you used AK 3RD GEN PAINTS MY PROBLEM I HAVE IS MIX RATIO BETWEEN THERE GLOSS VARNISH CLEAR AND THERE TINNER 3RD GEN BOTH AK I DONE 5050 MIX HALF AND HALF OF EACH AND ITS MILKY IS THIS NORMAL OR DO I NEED TO ADD MORE TINNER TO MAKE IT MORE TRANSPARENT SEE THREW CAUSE I GOT PAINTS A WHILE IV WELL SHAKING THEM BEFOR AND AFTER MIXING THEM 5050 OR 1TO1 WHAT EVER PEOPLE PREFER TO SAY BUT I SEE YOUR USING GLOSS VARNISH IN THIS COOL VIDEO ON ARMOUR TANK BUILD SI HAD TO ASK YOU AS YOUR THE MAN I SEE WHO'S GETTING GREAT RESULTS FROM THE AAK I ONLY STARTED TO USE THEM I USED TAMIYA UNTIL CAME TO THE GLOSS VARNISH FOR GOOD SHINE SO I'M HOPING U CAN HELP ME WITH THE RITE MIX RATIO WITH THE AK thinners I was given to use to tin the AK Varnish gloss
@scalemodellerbyaccident8671 2 жыл бұрын
Hello :) I have learned that it does not matter if you use regular paints or varnishes - the thinning ratio is at least seven parts of the thinner. The thinner is good to add to the color - that's my latest statement, not to spray separately on the model. The classic XF-22 or any acrylic-lacquer varnish is still irreplaceable because it is more robust than the water-based one. It's beneficial when you use decal solutions or wethering chemicals.
2 жыл бұрын
Very nice work. Great Flogger. Greetings, Aleš 🙂👍
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you so much, all the best in 2023!
@lmmodellismomilitare 2 жыл бұрын
Great work to see. Thank you for sharing and go on with this cool work. See you soon
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you so much 🤙🙏
@paulmillard1130 2 жыл бұрын
I haven't built a 35 scale armoured vehicle for many years and this video has reminded me how much I enjoyed it. All the model shops have gone here. I enjoyed watching this thanks.
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you so much, I am happy you have enjoyed the video. The 35 scale models are just perfect and the range of choices is tremendous right now - not only armored models but also trucks, helicopters and even aircraft :)
@Dancing-Brush 2 жыл бұрын
will you add some figures and base as well??
@scalemodellerbyaccident8671 2 жыл бұрын
Well I don't feel enough confident yet to build vignettes or dioramas - that's not my cup of tea. Nevertheless, I have New Year resolution to do make some attempts :)
@dalraechaki 2 жыл бұрын
@@scalemodellerbyaccident8671 Ok hard to waiy your next work!
@Dancing-Brush 2 жыл бұрын
what a great paint job!
@scalemodellerbyaccident8671 2 жыл бұрын
Thanks :)
@lesthiele4921 2 жыл бұрын
Greetings my friend, the Israeli T55 APC , has turned out perfectly, the colour was excellent, I am a big fan of Israeli armoured vehicle, looking forward to the next installment, best wishes to you and your family for the upcoming holiday season, I hope you have a safe and Happy New Year,best regards from Australia.
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you, sir, for your warm words. Also best wishes to you and your loved ones for the upcoming time. I also can't wait until I finish this model because there are more interesting ones to build :) Best regards from snowy Kraków, Poland :)
@jimmytgoose476 2 жыл бұрын
Very nice result ! It's deficient compared to the old Dragon/Revell kits ; try one of those if you ever do another 88 🙂
@scalemodellerbyaccident8671 2 жыл бұрын
Thanks for your warm words! Well, this kit has split personality :) In some cases is nicely detailed and goes together like a dream, in others is so disappointing... that's life :)
@jimmytgoose476 2 жыл бұрын
I'll be damned ...that must be the deepest thing I've ever heard in connection to modlin 😃👍 Split personality ? To say the least ! A former colleague of mine writes for the UK modelling press and did an article about the ICM Ju88A-5 , converting it to an -A4 ; he called me and told me what he wanted to do . I asked him what his first impressions of the kit were. "Shit", he replied , "what about you?" "Exactly the same, mate ." His model looked brilliant, though .
@jimmytgoose476 2 жыл бұрын
You didn't correct any of the kit's errors ...?
@scalemodellerbyaccident8671 2 жыл бұрын
which errors?
@jimmytgoose476 2 жыл бұрын
The cockpit floor for a start ...
@jimmytgoose476 2 жыл бұрын
Adding the missing console and levers on the port side was a nice touch ; the wire you added on the starboard side is possibly part of the oxygen system .
@scalemodellerbyaccident8671 2 жыл бұрын
@@jimmytgoose476 thanks, it's a bit hard decision. The interior is not a well visible inside as it might've been expected. From the other hand I know there're so lovely detail sets from Eduard.
@jimmytgoose476 2 жыл бұрын
The floor is the major internal error ; most of the rest is a bit vague but like you said , difficult to see . I haven't had a good look at the -A4 kit bit the -A5 that i built (converted to a C4, actually) was riddled with errors . I wouldn't buy another ICM 88 unless it was VERY cheap ; they just aren't as good as the old Dragon/Revell kits .
@Dancing-Brush 2 жыл бұрын
hey your new build! happy to watch that!
@scalemodellerbyaccident8671 2 жыл бұрын
Thanks, friend. Hope you will like it.
@semispecial1 2 жыл бұрын
YES nose weight is required. ordnance makes a slight difference but if you plan to display with wings swept back, you must have nose weight
@lesthiele4921 2 жыл бұрын
Well done my friend, the Israeli defence force always used vehicles that had no more purpose in their original form and converted them for other uses, looking forward to the painting episode, best regards from Australia.
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you so much, my friend.
@MVeminor7 2 жыл бұрын
Hi, Very interesting tank. I'm looking toward the follow up. Nice work.
@MojoDevirus 2 жыл бұрын
Looooooking good there. MiG-27 my fav aircraft.
@SniperEye 2 жыл бұрын
Very interesting video. Next week I will receive my order of AK 3rd paintings for my C-130J-30 of Zvezda. I like the colors of AK and hope they will work fine with my airbrush.
@pierreeduardoalzamoratasso9811 2 жыл бұрын
Hi Sir, best wishes ! So, does these paints behave like Mr Color ? Thanks !
@scalemodellerbyaccident8671 2 жыл бұрын
Hello Sir :) Mostly, they act similarly. You have to thin them down much more, you can paint them with a brush (for larger surfaces add a little tap water). Also, do not mix them with the thinner into an airbrush cup, because they stick to the needle cogginng the nozzle.
@pierreeduardoalzamoratasso9811 2 жыл бұрын
Ok, thanks a lot for the quick answer. Best wishes !
@Dancing-Brush 2 жыл бұрын
You made it finally..!
@scalemodellerbyaccident8671 2 жыл бұрын
Yeah, finally :) I remembered your previous comment so I was obligated to finish this thing :) Thank you for the support!
@Dancing-Brush 2 жыл бұрын
@@scalemodellerbyaccident8671 this build will be good reference for me later , thanks and impressive work :)
@MVeminor7 2 жыл бұрын
Looking Good!! I like your style. Not my kind of plane but, you made it look great.
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you mate <3 It's specific, that's true.
@steveej1558 2 жыл бұрын
I recently just went "all in" with a purchase of an AK 3G set, several singles, and thinner. It has not gone well. Using AK 3G thinner (AK11500) seemed very much like my experience when accidentally thinning water-base acrylic with enamel/solvent paint thinner - didn't mix, clogs/glumps in cup, splatters and "spits worms". Tried it with multiple 3G paints with same result. I had acceptable results when I tried Vallejo thinner and also with a alcohol/water home-brew that works well with Vallejo and Testors MM...but still lot of tip drying/clogging. Added a drop of flow improver with moderately better results. You had good success with AK11500?
@scalemodellerbyaccident8671 2 жыл бұрын
Hi Steve :) I'm sorry about your bad experience. Well, it's very personal how you perceive various stuff. I struggled to get used to thinning them down, cleaning an airbrush, and lacking this perfect control of spraying as you have with lacquers. The time will show if they're good enough. In my opinion, the AK11500 is optimal for them. The thinning ratio should be at least 70% of the thinner but even 80% is comparable with the 1:1 ratio for Tamiya XFs to Mr. Hobbies H series. I also tried to mix them directly in an airbrush's cup with a brush or a backblast and it's a very bad idea - these paints are very thick so they wrap around the needle worsening the mixture flow significantly.
@PanzerVonBits 2 жыл бұрын
Great video! Do you notice any difference between the color tones of the 3rd Gen compared with Real Colors? kzbin.info/door/cwF0IFT9T-11rxOjr2LOGg
@Dancing-Brush 2 жыл бұрын
nice painting, hard to wait next episode! well done!
@Dancing-Brush 2 жыл бұрын
what a scary kit...I have mig-23 from trumpeter too, good luck friend and I subscribed your channel
@scalemodellerbyaccident8671 2 жыл бұрын
Hello my friend! Thanks for the subscription. The kit is from these that you can't lower your guard. Nevertheless, I'm finishing it right now so I've survived :) From reliable sources, I know that MIG-23 is much better in build. Despite of the version, there may be some accuracy issues with intakes or nose.
@Dancing-Brush 2 жыл бұрын
@@scalemodellerbyaccident8671 Great! you finished this finally! congratulation!
@lmmodellismomilitare 2 жыл бұрын
Hi and so interesting video. Thnak you for sharing. The work Is so nice. What do you think about Vallejo and Ak? What do you prefer After the try? Thank you and Sorry for english, I am a modeler too. An italian modeler. I try differents Ak colors
@scalemodellerbyaccident8671 2 жыл бұрын
Thanks for your warm words. Well, I've painted maybe 6-7 Vallejo colors so far with a brush and an airbrush so I haven't much experience. Nevertheless, many guys use them, expecially for brush painting. Just look on youtube videos :) It means they must be satisfied. What's good with Vallejos is a very vast range of colours dedicated for armor models, figures, warhammer miniatures etc. For aircraft models... I would be cautious :) Good luck!
@MVeminor7 2 жыл бұрын
Hi, I really like the camo colors you chose. They will look great with the weathering!
@scalemodellerbyaccident8671 2 жыл бұрын
Thanks, I wanted to try these paints with some heavy-duty painting scheme. The weathering is almost done, I have to assemble the whole model.
@lesthiele4921 2 жыл бұрын
The Mig 27, is looking very good sir, you must be very happy with the result so far, best regards from Australia.
@scalemodellerbyaccident8671 2 жыл бұрын
Thank you, sir :) Yes, I am happy at this stage, it looked really bad before :) Best regards from Kraków, Poland!
@kubabaczek876 2 жыл бұрын
nice video I realy enjoyed it
@MVeminor7 2 жыл бұрын
That looks like a lot of work bro. Good luck. I am excited to see the paint job.
@lesthiele4921 2 жыл бұрын
That is some serious cutting you got into, I hope it does not affect the end result, I look forward to the painting episode, best wishes from Australia.
@scalemodellerbyaccident8671 2 жыл бұрын
Well, yes and no :) Yes because you already know about the surgery and you know where possible shortcomings may be :) No, because someone must be a really eagle-eyed guy to find it :) Cheers!
@AgentHKG 2 жыл бұрын
nice work👍🏻👍🏻🙏🙏
@fredtedstedman 2 жыл бұрын
she is very graceful , love her shape . 💛💙 Wales
@pawemateusz2699 2 жыл бұрын
This is kind of a model that I wouldn't have the patience to build. Respect mate for taking this one!
@scalemodellerbyaccident8671 2 жыл бұрын
It's just all about leaving your comfort zone... or making specific choices :)