Westin makes very good products. I like the angular look of their HDX drop step nerf bars. It makes the side view much beefier than tubular bars.

I have Jeep Compass front wheel drive can i install this...?

Can you make a video on the transmission for the Cadillac xts

Hi, I like your content. Do you accept sponsored products?

I'd seen someone note that if you don't have a vacuum pump, you can just start the truck and it should pull a vacuum and pull the hub in while the engine is running.

Gas is crap anyway

Nice job.

Straight piped with a resignator, is not straight piped!

That right there is why you buy a CORSA!

Thank u i neede to watch this today i hsv n̈nnnnnnnnnnnnnnnnnnnnnnn. Nnnnnnpnnnnn. Contribution. ContributionContribution. ...😅😅😅

Nice🤘🏿🤘🏿

How is that hub from 1aauto holding up on that 12.5 offset?

Where you located in Tx brother

How do you tighten up the belt or does it tighten up by itself after the car starts up?

The plastic sway bar links were actually better quality than those metal ones lol

Give respect to this man for making this video! There definitely isn't enough content for us XTS owners out here as everything is flooded with the CTS and ATS instead. I've taken a step back on creating repair video's simply because of the time it takes to record, edit, and educate others on the process.

Truck is on stands and about to do mine, but i dont have a vacuum pump. Is it possible to do without it ?

Sadly, these guys advocate putting in a "Level" Kit and Call it a 'Lift' kit. The Level kit is $60 [parts] and leaves the entire front-end HANGING down onto the spring/shocks on a 45^ which is TOO STEEP.. it destroys the actuators, boots, etc... and WILL cost you beaucoup $$.

4 min talking

have u ever replaced power steering pump on this car

We don’t want to know everything you know about this car.. we want to know how to get the alternate off

Nice! I have a 2019 Compass Trailhawk. What part of Texas are you in?

Torque specs?

Nice video. Do you know if I can make the DRL Amber ?

How are these holding up? About to replace mine in the next two weeks.

Do you have a list of the tools needed to complete this?

My wrangler makes the same rattle noise heard at the end of the video no codes, what could be the problem? We replaced the rocker arms and lifters (none were bad) thinking it could be it.

Terrible video you’re not even showing what you’re doing

Good ole Marion Tx

Thank you for a detailed video. Pointing everything out and showing it clearly on video makes this video great. I believe my driver side hub needs replacing because at low speeds I hear a humm.

I had to chuckle when you said you were surprised to see that issue on a Jeep with 60K miles. I have a 2016 and it is a hunk of crap. LOL!!! The Jeep plastic oil filter housing cracked and needed replacement at 75k. The belt tensioner pully had to be replaced at 55k. The front ball joints were shot at 70k....and more. I'm a hunter but not an "off roader", and this crap mobile is a hunk of junk in my humble opionion. But I have to say 118k until a fuel injector went bad. Love it but hate it in the same breathe 😅. Thanks for your time in making the video.

Most of the compressors have 3 oz of oil in it. That's what the pink tag says on it

How hard is it to get filter out ?? Im not sure i got one in there at this point..but pressure still low 30..

thanks

When you say you “trim behind the bracket” for the top mount, what are you referring to, like what do you mean you needed to trim? Thanks in advance, very good video

I'm having an issue with my 2016 Ford F-150 4x4 making a humming noise coming from I believe my right front tire side, it goes away whenever I turn slightly right or a complete turn, I've talked to several people including from AutoZone and Advanced Auto Parts and I'm told different answers. My tires are not worn out, I don't feel any play when I do the tire wobbly test,,,,, anybody has an idea or answer as to what it could be???

Awesome..I been struggling with that bolt...I didn't know i could remove it lol

I ran into 2 problems not camber bolt kit took to Firestone and install they said they can’t align bc there was no camber bolt kit included with lift and 245/65/17 rubbed againt strut tower I need 1.5 spacers did you have this problem?

Great process! Can't wait to try it on my Mustang!!

Awesome video brother. I really like how this video is “cut to the chase” no drama, and you get straight to the point. This is by far the best sounding exhaust I have witnessed here on KZbin and I have been really wanting to buy this exhaust for my truck. 2018 F150 5.0 XLT/FX4 Supercrew Thank you

I have a 2017 F150 and it was sounding loud . I didn't want my BF doing it he's not a mechanic but how much would it cost if I took it to a dealership to have the two front bearings changed. I am so frustrated that mechanic's charge a lot

I had a similar setup in my 2005 f150.I towed a 7k travel trailer and it was loud. Sounded gre5at the begining but it got old as time went by. I would suggest upgrading but leave the outlet behind the tire.

My nephew owns a 2010 F150 2WD with almost 190,000 miles. The truck is still near perfect, and the 4.6 2V runs strong thanks to 3,000-mile oil changes.

I wonder why Ford chose not to chrome the rear bumper. I love the look of your truck and how clean it stays underneath in Texas. I'm from New Hampshire, so undercoating is a must, which is where it is heading once I give my truck a proper shakedown.

I'm not sure if I missed this, but did you mention your rear-end ratio? 3:31, 3:55, or 3:73

I just tormented myself trying to choose between a 2015 Lariat for $29,000 or a 2016 FX4 for $20,000. The Lariat like yours was beautiful and had so many great features, and I tried hard to get them to drop the price but had zero success. I am now the proud owner of the 2016, and I'm happy because I still have an extra 9K in the bank.

SubscribedI. 'm going to post multiple opinions and questions on this video. Hope it helps boost your views.

I just did this on my new to me 2016. Texas wrenching sure beats New Hampshire, hands down. Excellent job and beautiful truck.

Hub assembly is in the description from Amazon.