Will this work if you have a two inch block

That wiring is a disaster. Holy crap

Except you scraped up an otherwise pristine dash in a pristine cab in a pristine overall Titan - just because you didn't spend the extra few minutes locating a plastic pry bar or even a butter knife.

GREAT VIDEO. I Had the same issues and I figured it out then came across this video and I did the exact same thing

Thank you for the video. Clever way to mount shrader valves. Why not remove tire?

Very helpful. Thank you! Got any idea how to pull the plugs from the rocker switch and move them over to and L-Series (stock polaris) switch!?!

Very helpful! Audio left a little to be desired but nothing that the mute button couldn't fix.

I'm glad I found your video otherwise I was going to open the cover of the speaker that is above the stereo thanks for sharing

Can you show the whole wiring process from light to pulse to switch iv tries everything and my LED switch only lights up when I turn the light on. The bottom LED on the switch never comes on

Thank you for this tip. Worked perfect with my install.

so these are aftermarket leds correct? Not Polaris brand.. where did you get your pulse bar connectors to splice into the regular light bar wiring?

I know this an old video…I have a question…how do you hold that nut on a stick in place? I’m about to install this kit tomorrow on my 2014

Not to critique but grab some heat shrink tubing that tape is not going to last and you will have hot wires exposed.

It's amazing how many guys doing videos on these 5 pin switches appear to be clueless about wiring switch on power to the dash light and battery power to the load, two different power sources through the switch. Thanks for sharing.

Did this end up working? I seen some comments saying it was wrong. I am about to wire up some lights today on my ranger.

Holy crapoly!!! Lol this is the creek behind my house!!! This was filmed right b4 we moved in cuz where y’all stopped at the “blue hole” is now opened up ALOT more!!! I ride this trail on my dirtbike every weekend at least once. I’m sure I’ve passed y’all at least once, I’m on the little red 125 Honda with stickers all over it lol the caves are right there close to the blue hole if y’all have never seen it, I would love to meet up sometime if y’all are interested cause I have no one to ride with! Look out for the videos on my page because any of the woods videos that you guys see will be of the same holler :) I’ve got a few of the caves on there I think! But hell yeah I’m glad to see that other people enjoy this trail as much as I do, I just wish they wouldn’t throw their beer cans out everywhere! I am really honestly thinking about going through the trail impugning up some big trash bags at all the stops where they build fires and camp out With a sign saying “please put cans in the bag and NOT on the ground “…… I doubt it will make a difference though, but like I said I hope to see y’all out there sometime and hit me up if you ever want to ride together for real! Hope y’all have had good holidays and safe riding!!! :)

Thanks for the video really helped.

B E A utiful!

Thanks for the vid. I was leaning toward this kit but unfortunately it wont fit my Titan. Im running a 14 bolt 11.5 inch ring one ton AAM axle in the rear and need a kit that sits on top of the springs. The saddle that comes with this kit will not sit on the tubes.

Good video. It was alright. OK, OK alright.

That is not correct at all You don't tun the load through the switch You use the switch to trip the relay . You are just asking for a fire doing that way

How to make spaghetti and burn your utv to the ground

My light bar is still sitting on the shelf collecting dust.LOL.

I see no reason anyone would want these to come on with the ignition off... Personally I'd bridge #2 and #6 to pulse bar yellow so the switch light would come on with the ignition and the light only when the switch is pressed. Just me though.

It's surprising they don't have the pulse bars powered only when the keys on

Where did you get the 3 wire connectors that are under the hood with the red, black and yellow wires?

I love that camper shell, who makes it? Looks great on the truck by the way!

nice truck! I don't have a problem however I wanted to know if you have a 4 inch lift on your truck?

Ordered buzzer off EBay and solved my issue in 5 minutes and $22.00 , thanks !!

When you said re wire all of them did you mean just cutting the wire off the switch and running that yellow wire from the rocker switch to the pulse and putting it in a casing or loom, or do you have to wire back to relay ? I hooked the wire up and it is all working great just want to make sure I’m not missing anything

Thanks for putting this video together! Definitely helped to see the process before starting. I slid the nut-on-a-stick onto a zip tie and snaked the zip tie through the large frame hole to the upper mount bolt hole, then inserted the stick into the frame. When you let go of the stick, the nut portion slides down the zip tie and goes directly to the right area. Also I found getting all the brackets and U-bolts in place first helped with aligning everything before cinching down on any of them. Thanks again!

Music video no dialogue not the best way to teach…

You are hardcore

I don't understand what you wired the yellow wire into? The red constant power or the white bottom wire? I thought i had it figured it out today because i had the little light on only when key was on than when switch was turned on it was all on but kept popping fuses. Im still comfused, what am i splicing and tapping into? An updated video of the back of the switch would help alot or a picture! TIA!

thanks!

Hello, I hope you can help me. I made an identical connection to yours. with the key off the led bars light up, but not the word "led light" on the rocker switch that only turn on with the key on. The problem is that after a week, the battery was dead. you didn't have that problem? I mean, I thought I had done the installation wrong, and that I needed another relay so that everything turns off when I remove the key. but I see that you did it the same as me. The only thing that I do not have installed with a rocker switch is a sound bar that is directly connected, but it has on and off in the bar, so I doubt that this is the problem.

The pulse bar power is switch controlled

Ordered the buzzer off Amazon and fixed it in 5 mins. Thks!!!

I know these girls. I triple dog dare.....

What kind of tires are those ? They look aggressive. Brand and model if you don’t mind sharing please

Thanks for the video. Just wired up 2 light bars using your tips.

Did you know where is located the pulse bar on roof?

We got no head lights at all in our 2020 polairs ranger but tail light work fine then when I look ungrr the passenger seat there is no wiring running back to plug it in. Now i find out that was optional. Really headlights are now optional. What a bunch of shit.

How do you get to the cave?

Where did you get your mounts for the rear pods?

Where did you attach the white wire too Power??

Exactly the video I was looking for great job

Just popped up in my feed. It was a great day with friends.

IM still having problems with this, I wish you would have shown how you connected the wires on the back, I dont get what wire you clipped off, your video is the only one that actually makes an attempt to wire in a rocker to these so called wire harness, all I want to do is wire in the 5 pin switch and do away with that off/on stick on the dash switch.ALso, those wiring harness come with an off/on switch that just stick to your dash which needs getting rid off, what did you do with yours?

Thanks