I did not see a firematic valve incase of fire it shuts the oil off. I did like his quarter turn shut off valves on the draw and return lines. I wouldn’t have deleted the tigar loop. Tigar loop has a better draw pressure and you eliminate the return line that can stir up crud off the bottom of the tank. Lowers viscosity of the oil and helps with algae on the bottom witch you do not want.

Roth tank is just an oversized milk bottle. Have you ever dropped a milk bottle leaving the store that usually doesn’t end pretty. You got to get rid of the power pipe, threader and use a manual if you want to get rid of those skinny arms and look more like me Arnold.💪

Does the fill pipe have the dip tube the one that goes 2/3 the way down the tank to help stop foaming

This is not installed according to Roth instructions and does not meet the requirements of a Roth certified installation. Thus the 30 year warranty and $1,000,000 insurance liability is null and void. 1. Missing swing arm on fill pipe. 2. Fuel gauge cannot be located next to suction line. 3. Outside fill pipe must be 36” min from ground level. Note: Go back and fix all your installations that are done like this so customers will have valid warranty coverage. And go back and study the Roth instruction and certification manual. CUSTOMERS: call this installer back to fix your installations asap.

How did you get the copper pipe to sit up 1" off the bottom? I saw him pull it up and then leave it? How did it not just fall back down into the tank? Thanks!

One of the worst fill pipe installations. You are not supposed to put torque on a pipe affixed to a polyethylene attachment. Get a vice grip and prefabricate it.

most of our work comes from real estate closings and home inspections

twenty eight hundred jodi welch brechts own kindred als oil timbered

new is nice

Is 1/2" line preferred to 3/8"? My tank is only 10' away, is 3/8" acceptable?

The roth tank label says not to pump oil from one tank to another. I found this out because i got a new tank and the guys didn't folow quute a few of the basic instructions that i read up on afterward because i am having issues. Im afraud to fill the warranty card because these guys probably werent Roth certified installers which means my warranty wont be discarded. Its sad that even after paying so much money, i should be the one doing all the research before i had someone "professionals" install it.

what kind of pipe dope are you using ??

You forgot to use swing joints on vent and fill pipe

Looking at roth tanks myself and well, I don't think you're supposed to torque against the coupled tank fitting and it seems to be missing a swing joint. ...

always back up the fittings with a second pipe wrench. should have left the tiger loop.

Why didn’t you use the piping that Roth makes specifically for these tanks? They’re better.

impt notes add old oil from old tank to new tank probally voids warranty ,plus u transfers all the crap thats in old tank,and work the piping to the tank not from the tank as being plastic it might crack ,wouldnt take the chance

excellent video!