Пікірлер
@250race 4 күн бұрын
Nice bike. I recommend when you take the head off to sharpee it And slide it Across 80 grit sand paper 4 to 5 time and clock it. Slide 4 to 5 times in till sharpie is gone. Because the head is not true. As for the carb stock is a s9 and s7 is what you want. On the needle 6chy12-82 is the 2004 cr needle but it is Discontinued. The 6dgy26-69 is the 2005 yamaha needle and this works just as good as the 82. Buy a Crf450 coil 2002 to 2008
@Fixit_all_Farm 4 күн бұрын
@250race good idea I gotta do a trx250r this week I'll try that
@jordanburnette2530 8 күн бұрын
Worst drive of my life was in that ford on the gravel road headed to the hospital. Glad you got yourself another bike buddy.
@chadriddle3517 10 күн бұрын
Good job on the rebuild.
@Fixit_all_Farm 10 күн бұрын
@chadriddle3517 thank you just did some work on a suzuki jr50 video is up on the channel
@mikespikeey4625 14 күн бұрын
I HAD XR80 XL100 125 185 AND THE XR250 REALLY EASY TO TIME UP
@Fixit_all_Farm 14 күн бұрын
@@mikespikeey4625 ya super mechanic friendly bikes and really reliable if taken care of.
@CTMTB1 14 күн бұрын
Does it matter witch directions the piston rings sit as long as the gaps are different ways
@Fixit_all_Farm 14 күн бұрын
@CTMTB1 I'm usually doing 2strokes with legit kits so there are dipoles in the ring groove to hold the ring gap, but this kit did not have that and had no instructions so I just staggered the gaps and called it good. Once the rings broke into the cylinder wall, there was zero smoking and great compression.
@CTMTB1 12 күн бұрын
Sweet thank you
@jordanburnette2530 21 күн бұрын
Your red mallet sounds like one of those fully semi-automatic ones. Hope you have a license for that.
@Fixit_all_Farm 21 күн бұрын
@@jordanburnette2530 bump stock bro
@drivingacrossamerica8228 Ай бұрын
Thanks for posting, and letting me know the new video was up!
@_357_ 2 ай бұрын
Love the 2nd gens, air cooled two strokes are so rare
@Fixit_all_Farm 2 ай бұрын
@_357_ thanks buddy hoping to build a couple more in the future
@Fixit_all_Farm 2 ай бұрын
@_357_ watch the final episode to hear it run
@drivingacrossamerica8228 3 ай бұрын
Would also LOVE some sawmill videos. Once I get a shop setup, I’ll be running my wood lathe again and will probably end up making a channel about that.
@Fixit_all_Farm Ай бұрын
New sawmill video is up bud
@drivingacrossamerica8228 3 ай бұрын
Love the backstory to the projects. I really appreciate you sharing this with us.
@drivingacrossamerica8228 3 ай бұрын
I’d love to see some playlist of the different projects as they come around. I love to set them to play in a row so I can have a while of the same creator.
@Fixit_all_Farm 3 ай бұрын
Ya I'm still figuring all this out and trying to get more tech savvy. Thanks for watching and yes I will be adding for sawmill content soon.
@drivingacrossamerica8228 3 ай бұрын
I loved the video. Thanks for sharing this with us. Looking forward to seeing what else you have for us. Keep up the great work.
@Fixit_all_Farm 3 ай бұрын
Thank you
@yeahright302 3 ай бұрын
music sucks, would have been better to narrate as you go!!js
@Fixit_all_Farm 3 ай бұрын
Still trying to figure out what people want to see. I will try to narrate next time subscribe so you don't miss it.
@Fixit_all_Farm 3 ай бұрын
And thanks for the feedback
@randythercguy5447 3 ай бұрын
looking nice !
@Fixit_all_Farm 3 ай бұрын
Thank you
@randythercguy5447 4 ай бұрын
Looking clean 🤘
@Fixit_all_Farm 4 ай бұрын
Thanks bud. Go check out the channel to see where it started
@Arizona-.Native.Joshua 4 ай бұрын
Looking good so far.....
@Fixit_all_Farm 4 ай бұрын
Thanks man working on the engine next week
@Arizona-.Native.Joshua 4 ай бұрын
How much did they charge you to powder coat your frame thanks
@Fixit_all_Farm 4 ай бұрын
600 for blast and primer. Had zinc primer put under it. He also did all the gold and black
@suitable_shorts_Inc 4 ай бұрын
Need a pt 2
@Fixit_all_Farm 4 ай бұрын
Working on it today
@Arizona-.Native.Joshua 4 ай бұрын
Awesome 👍
@Fixit_all_Farm 4 ай бұрын
Thanks 🤗
@simongill5136 5 ай бұрын
Pretty sure that is Neebs' truck from #NeebsGaming. Maybe his is older.
@Scurvyraceworxs 5 ай бұрын
My 87 yota has factory ball chiller
@dankyypants3397 5 ай бұрын
Good ol nut chillers
@chrisgo420 5 ай бұрын
AMC came up with the double nut chiller in 84 cold air on both legs
@chrisfernwalt6881 5 ай бұрын
I got a 2000 Tahoe! Still has the pantned nut chiller and I absolutely love it!!!!
@dgaf9843 5 ай бұрын
Im so in love, i might be pregnant
@fredeerickbays 5 ай бұрын
if it was built before 1995 when they started putting all the shit under it.
@yemetrica 5 ай бұрын
its called a gooch cooler
@gregoryhoff3281 5 ай бұрын
Crotch Crisper
@darkreno750 5 ай бұрын
Spray some oil every once n a while hell yeah tho 😎
@Fixit_all_Farm 5 ай бұрын
Thanks buddy
@aretnap3653 5 ай бұрын
TheHONDA 250R 3-Wheeler...Ended "Idiotic-BloodLines".
@Fixit_all_Farm 5 ай бұрын
Does this mean you're not a 3 wheeler fan?
@ronaldgentry9923 5 ай бұрын
Hard to believe a 84 250R thats never had the rear axle apart, I bought one brand new in 84 and had to replace axle bearings more than once in the 5 or so years I rode it before I sold it and bought a Quadzilla.
@Fixit_all_Farm 5 ай бұрын
Ya man dad bought this one new in 84 as well. Check out pat one on our channel for more info.
@Petesworkshop2225 5 ай бұрын
Honda built their stuff amazing in the 80's
@Fixit_all_Farm 5 ай бұрын
Heck ya they did.
@SumOneTwo 5 ай бұрын
Restoring a death trap rolled that several times and was lucky to be able to talk about it
@Fixit_all_Farm 5 ай бұрын
Ya they are a handfull
@SumOneTwo 5 ай бұрын
@@Fixit_all_Farm cool that it’s your fathers so have fun and stay in flat roads ;)
@Arizona-.Native.Joshua 5 ай бұрын
Nice.... Spray penetrating oil on every bolt before the tear down might help 👍👍
@Fixit_all_Farm 5 ай бұрын
For sure and had to use some heat too.
@RPalmentera121 5 ай бұрын
Hey buddy, I just found this video and haven't even finished it. But the fact that it was posted so recent caught my interest. I'm at the same stage you're in with my 86 TRX250R. Thanks for the video!
@Fixit_all_Farm 5 ай бұрын
Thanks for watching bud
@karlaluke9329 5 ай бұрын
He did such a good job. That was one big puddle, he rode through.😂 thank you so much for sharing Jer. I sure love you.❤
@Rip_pro572 6 ай бұрын
Hi
@Fixit_all_Farm 6 ай бұрын
Hello
@El_Chompo 6 ай бұрын
I used to think 3 wheelers were a little weird, but after seeing videos of them going around a dirt oval track, they actually look like they are kind of faster and more fun than a dirtbike or quad around a track like that. I never thought such a odd design would work so well. More forward drive traction than a dirtbike, yet you still get some leaning and weaving in and out of tight spaces advantages of the front end of a dirtbike.
@jordanburnette2530 6 ай бұрын
I would totally ride doubles on that with you. Best part of the video was watching you pull start that bike. I actually clapped when it started.
@Fixit_all_Farm 6 ай бұрын
Ya makes me want a sled lol
@jordanburnette2530 6 ай бұрын
I want to see you shoot some firearm stuff. Your knowledge on firearms is probably as good if not better than your knowledge of old Hondas. Keep making videos.
@joski9030 7 ай бұрын
It’s dirty 😂 it’s fucked
@careysoutherland8291 7 ай бұрын
looks like a bills pipe to me but im not very familiar with the pipes.
@Fixit_all_Farm 7 ай бұрын
Thanks buddy
@shawnmann1781 7 ай бұрын
Check out mrc builds he dose alot of honda 3 wheelers
@Fixit_all_Farm 7 ай бұрын
Ya man I love his channel
@shawnmann1781 7 ай бұрын
Use the 400 es brake set up it will transfer right over so will the axel and carrier
@Arizona-.Native.Joshua 7 ай бұрын
If you're not looking for oem parts ebay a good place to get parts 👍
@Fixit_all_Farm 7 ай бұрын
Thanks I will keep an eye out.
@darrylpatterson7365 7 ай бұрын
That headpipe is a Bassani.
@Arizona-.Native.Joshua 7 ай бұрын
@@darrylpatterson7365 if so the guy who made those pipes recently passed.
@RoslynnKolpack 7 ай бұрын
Looks fun
@Fixit_all_Farm 7 ай бұрын
Cold but fun check out www.youtube.com/@Fixit_all_Farm for more videos
@AshleyCookPhoto 9 ай бұрын
Great! I can't wait to see what you do with all of the bikes. Keep the great content coming!