Guy at Halfords replaced the bulb in about 10 seconds without removing anything. Best £10 spent to save all the trouble.
@hilario7873 күн бұрын
Thanks Mike
@gersie7773 күн бұрын
Thanks a lot! Did my pads yesterday while watching the video ❤. You made it really easy.
@gersie7773 күн бұрын
Thank you! Did my discs yesterday, while watching the video ❤
@barryjackson21974 күн бұрын
Great video
@kreanj97515 күн бұрын
Everything is fine except i constantly get the "check license plate lights" error now...
@Eruvio025 күн бұрын
awesome thx ! can i have the ref of your spring compressor please ?
@vialettotony3 күн бұрын
Hi. I got them from Amazon but it was a long time ago and don’t have part number now. Apologies. All the best 👍
@dodee25567 күн бұрын
What fault code did you have?
@vialettotony3 күн бұрын
Hi. I didn’t have a fault code, it was just a video to show “how to”. All the best 👍
@DenisMclean-e9o8 күн бұрын
Are the rear shocks adjustable?
@vialettotony3 күн бұрын
No. At least not on mine as stock. All the best 👍
@DenisMclean-e9o8 күн бұрын
Is this the normal height from the ground at the rear?
@vialettotony3 күн бұрын
Yes that’s right. All the best 👍
@RobfBiz11 күн бұрын
Amazing video. Exactly what I was looking for and a job you have now made me more comfortable doing. Just need to find a 36mm narrow socket now😮....
@mikheilkuchukhidze766314 күн бұрын
it is same window motor as a jeep renegade?
@JosPloegmakers15 күн бұрын
Exactly what I needed to know. Thanks a lot!
@MaxTV_CCm1216 күн бұрын
Thank you very much. In my Giulietta the hose next to the battery was disconnected. With the help of your video, I managed to repair it, thanks. ✌🏻
@ΣτέλιοςΡακιτζακης17 күн бұрын
Can u tell me if the hose upside has a specific hole- position that fits . Because when I pull the glovebox out came along with the hose and just place it .. somewhere up without knowing if I put it right . Thanks for all the useful videos
@vialettotony3 күн бұрын
Hi. Yes, it needs to connect to an outlet that comes from the blower unit. All the best 👍
@ndivhot88017 күн бұрын
Can you do front light bulbs change
@vialettotony3 күн бұрын
I’m sure I’ll get around to it. Controversially, many people say you have to take the bumper off to change the bulbs, this isn’t the case. There are parts that move aside to allow access. All the best 👍
@JEFF055122 күн бұрын
very well explained video.
@ΣτέλιοςΡακιτζακης23 күн бұрын
Hi Tony . Thanks for everything. I would like to ask u sth . I removed the glovebox but I m afraid I put the hose that it has wrong . And now pulls out smoke from the hood near the windscreen.Is that possible or is sth else happening?
@kitvaughan26 күн бұрын
Super helpful - thanks for posting. Did the radio work okay following reconnection of the new battery?
@vialettotony26 күн бұрын
Yeah all okay. No issues at all. Hope that helps. All the best 👍
@deniskovac248928 күн бұрын
Loving the videos. I just replaced the back sway bar links. And now am waiting for a replacement rubber stabilizer for the exhaust. Brought me here. Thanks, again. Tony.
@vialettotony26 күн бұрын
All the best 👍
@jamesrickerby2756Ай бұрын
Thanks. Reading handbook is a mare. Yours is quicker. You need a job with L/R. The old man of time!
@unclepabsАй бұрын
Did you ever do a fuel filter change? Trying to find instructions / video on the fuel filter. Thanks
@vialettotony26 күн бұрын
Hi. No not yet. One for the future. All the best 👍
@akayjay697Ай бұрын
Thanks. That was all clear. I’ve just done this with ease after watching your video a bunch of times. I just ordered the same battery as you using the link. Thanks for all the info! Start stop seems to be fixed now and the same issue with the passenger airbag.
@vialettotony26 күн бұрын
That’s great. All the best 👍
@akayjay697Ай бұрын
Thanks for the video. I made the mistake of having Halfords replace bulbs last year. Took it to a proper garage this month to replace the bulbs with better ones and they told us the old bulbs weren’t even clipped in place. Shocking job by Halfords. Never again.
@akayjay697Ай бұрын
Thanks for the video. I’ve got an interesting one, I see intermittent warning (sound and light) for no seatbelt when I’m sat in the drivers seat with the seatbelt in. My wife doesn’t get this problem. Can it somehow be related to me being too heavy?! I’ll check the wiring this weekend and see how it looks. Many thanks!
@vialettotony26 күн бұрын
Pretty sure it’s not weight related. May be you just sit differently to her and there’s a connection issue with the buckle. Try putting a multimeter on the connector as I did and wiggling it about. Good luck. All the best 👍
@IRozzaАй бұрын
At 20:57 on the left hand side, the clip next to the green wire. Is that something you can take out with a tool, insert into the door card slot and then put into the door itself. As it’s causing me a nightmare to leave it in the door itself, and then try re slot the door card into its fixed position
@uniqueinventions9310Ай бұрын
great video, do you have an idea of how this would cost if i went to a mechanic?
@vialettotony25 күн бұрын
Hi. Depends on their hourly rate, but shouldn’t be more than an hours labour and the price of the part. All the best 👍
@alichakri6443Ай бұрын
Man you saved me 🫶🫶
@josepharmstrong4639Ай бұрын
Mate you don’t fancy doing mine do you? Ha ha!!
@vialettotonyАй бұрын
Haha. Nah you’re okay 😂👍. All the best 👍
@yandenutsАй бұрын
Great video mate. Love your explanations.
@lllTinyDancerlllАй бұрын
Absolute legendary video. Thanks. I need to replace the flexi on mine but the whole exhaust is rusty so was thinking of just changing the whole thing. You’re right though, the sizes of those nuts is an absolute big dog move. I’ll probably just order some in before i even start just for ease of mind because once it’s off i’m carless until it’s back on. 😅
@vialettotonyАй бұрын
Awesome. Thanks for the positive feedback. All the best 👍
@vaybabayin5523Ай бұрын
C1A68-1C. C1A04-78. C1A13-64. C1A36-01 these ara my RLM fault codes. What should ı do? 2011 l322 3.6 tdv8
@bartukastrАй бұрын
F this, f that, f everything...can't get my filter off, so tight and rounded up. Spent way too much time on it it was getting dark, gave up. Even tried with my special tool that found that can take of pretty much any oil filter out there. Also sump plug, had to use hydraulic jack to brake it loose😮 made scarry sound but I had it loose. It was soooo effing tight I've started to question my lefty loosie rightly tightie. Fresh oil in and fuuuuk the filter for now 😂😂😂 P.s. have the exact same silver line spanner as you in the video, got really excited and thinking it will be a doddle
@robrob6287Ай бұрын
Very useful video... I followed the instruction of the clio 3 manual where Renault say lamp are C5W but it is a mistake.
@patalenoАй бұрын
Great video mate. Was thinking of doing mine on the drive way. Ended up taking mine to the garage and he put on the hydraulic ramps and changed for me for £50. Took him about 15 minutes but it was £50 well spent imo. Probably saved me a few hours. It's so easy for mechanic to change stood under it on the ramps. I bought the full exhaust got a good trade deal on it so saved on cost of parts. So satisfying doing it yourself though I just did not think it would be easy on my own on a drive changing a whole exhaust. Will probably have a go next time in the sun.
@ismailgullu4143Ай бұрын
Hi if there is no bench seat, would they fold 90 degrees? I ask this because I'm planning to sleep in it for a night and just wanna know the minimum requirements of modification. Thanks in advance.
@vialettotonyАй бұрын
Hiya. Not too sure to be honest. They’d definitely go further. I’d say wip out the bench seat as it takes seconds and give it a go. Thanks for watching and good luck sleeping in it 😂👍. All the best 👍
@ismailgullu414314 күн бұрын
Wanted to give an update about topic. It’s better than i expected and AAMOF it’s almost full flat. My height is 184cms and i can fit comfortably (trunk closed:). With some fillings on either side of shaft tunnel and a mat, it would be perfect for short adventures. Best regards.
@TheFlyovercloudАй бұрын
Grazie , thanks 👍👍
@karlhinzeАй бұрын
Just saved me £50. Thanks.
@jamesperrin5691Ай бұрын
why.a new sumo nut? old one is just a bolt how will a new one be any better?
@vialettotonyАй бұрын
Good practice and manufacturers recommendation. All the best 👍
@bartekmiselis637Ай бұрын
In the video your showing, does the car have heated windscreen? If so, after scuttle panel removal, are the heating cords visible?
@vialettotonyАй бұрын
Hi, no unfortunately not so can’t comment. All the best 👍
@angrydadxboxАй бұрын
Shame the wing doesnt line up in your video after 😅
@andyroberts792Ай бұрын
Thanks Tony. Great videos and very useful.
@99tomsmithАй бұрын
Hi mate my driver's door main speaker and rear driver's side speaker don't work - the tweeters are fine but the main speakers no joy - do you have any ideas what could be the problem? Thanks!
@vialettotonyАй бұрын
Hi. It would be strange for two speakers to go like that and wiring to fail, so it could be amp related. Tough to say for though. Sorry I can’t help more. All the best 👍
@sideshowlolАй бұрын
Fantastic! Thank you so much for making this vid. I am going to check the cat converter nuts on my Corsa and see what condition they are in before taking this on. How long do you reckon for this job from start to finish if the nuts are not too corroded? Thanks again.
@vialettotonyАй бұрын
Hi. If not corroded then it would take less than an hour on the drive way. I’m sure. Remove that cross brace though by the flexi connection. Takes a minute to remove and saves so much time faffing about. All the best 👍
@dermotspollenАй бұрын
My 2014 Clio petrol coming up with check airbag and stop start. Can't get it off. I have to take it to the mechanic hopefully he don't charge too much
@filibertorodano1966Ай бұрын
nice one
@jimbakker4287Ай бұрын
There are no holes on my car i dont have a side skirt either do you know how i can make it fit with a original side skirt because i dont have one?
@vialettotonyАй бұрын
Hi. If you want to fit them correctly then you’d have to make holes. Without that you’d need some sort of adhesive but then there’s always a risk of it failing and them falling off. If you’re going to do it then it’s worth doing it properly. All the best 👍
@JiveoseanАй бұрын
Je cherche la dépose de l' alternateur sur Giulietta. Il faudrait vidanger le liquide de refroidissement pour y accéder? Cela paraît extraordinaire?
@vialettotony25 күн бұрын
Hi. Being 100% honest, I don’t know. Can’t imagine why you would need to though?? All the best 👍
@ardjanwinter870Ай бұрын
It can't get any clearer than this! Amazing tutorial as usual. Superb!