I’m curious what the thoughts of someone working with epoxy regularly are about the idea of coating a standing tree in epoxy. I have a set of trees that grew intertwined to reach a pretty good height. One of the trees then died unfortunately, and I have been wondering if there was any way to possibly preserve it bc it looks really interesting wrapped together with the living tree. This is a very early stage idea. I suppose the other possibility would be to take the dimensions and build a copycat sculpture around where the dead tree was after having it removed.
@TexasArtCompany3 күн бұрын
Moisture and trapped air would be your largest concern. But I don’t see why it would be worth a try. It should preserve it similar to driftwood. Maybe try a sample first. It will yellow in the sun though.
@NiobiumThyme5 күн бұрын
Very helpful. Thank you
@TexasArtCompany3 күн бұрын
Thank you
@Gary_in_NoVA11 күн бұрын
This sounds like an infomercial. Do you have a business relationship with the manufacturer? I.e., sponsorship or marketing deal? Did you get the product for free in return for this “review”?
@TexasArtCompany9 күн бұрын
Not at all. I would love for a big brand to think the same thing. Thank you 🙏
@benstoth16 күн бұрын
Is finish prepping the bare wood with 220 too coarse?
@TexasArtCompany15 күн бұрын
That’s about as far as you want to go. Good call!
@1978TrevinoАй бұрын
Would this work with metal that is in hot temperature like an engine bay or bbq pit
@TexasArtCompany28 күн бұрын
That I’m not 100% sure
@CollinsRealtyАй бұрын
I used linseed oil with beeswax on the wood around my hot tub outdoors. 5 yrs later I’m doing it again but probably could go another 5 it’s so effective.
@TexasArtCompanyАй бұрын
That’s great news, thank you for sharing
@JenspoАй бұрын
Thanks!
@TexasArtCompanyАй бұрын
Thank you 🙏
@FreejohnsilkyputtyАй бұрын
It’s just phosphoric acid and hand sanitizer. Don’t waste your money
@TexasArtCompanyАй бұрын
Hardly a waste of money though
@randomizer01j23Ай бұрын
Can I add a stain before I use linseed oil? As long as the stainer is also oil based? Or will the linseed oil not work?
@TexasArtCompanyАй бұрын
As long as the stain has cured and is dry. I wouldn’t rub it in a lot, light coats to build up a finish.
@YanksyАй бұрын
Throw in a bit of oil poly and it will really strengthen it up.
@TexasArtCompanyАй бұрын
Nice tip 👍
@chriswilkes43502 ай бұрын
Very Helpful. Thanks.
@TexasArtCompanyАй бұрын
Thank you
@blanesam84112 ай бұрын
👍THANK YOU 🎨
@TexasArtCompany2 ай бұрын
🙏🙏🙏
@alanh67972 ай бұрын
💐 promo sm
@TexasArtCompany2 ай бұрын
👍
@VickiCouty-dj6fz2 ай бұрын
Trying to treat the 2x4s I used as the framework to my chicken coop. I should have bought treated...I know. Is linseed oil a good way to preserve the 2x4s?
@TexasArtCompany2 ай бұрын
It would certainly be the cheapest but will require a few coats and may need a few more down the line depending the weather conditions. Spar or polyurethane might hold up better but will cost a bit more. An oil based product in general will always be more resistant against weather and water.
@mountfairweather2 ай бұрын
Hello not my native language what is the elbow grease and where do I buy it from store? Many thanks
@TexasArtCompany2 ай бұрын
Term for a “little hard work”. I wish they sold it 😂
@kevinrunnels12732 ай бұрын
That solution (vinegaroon) is also great for dyeing leather black.
@TexasArtCompany2 ай бұрын
Great tip! Thank you 🙏
@phoschnizzle8262 ай бұрын
Brushing on a concentrated solution of instant coffee before using the vinegar solution will give an even darker tone to the wood. Not as necessary with oak (higher tanic acid content), but really helps darken pine or poplar.
@TexasArtCompany2 ай бұрын
Awesome tip, thank you 🙏
@ichuggballs2 ай бұрын
this is just ebonizer? i use this to make black leather usually you'd add a tannin to the wood such as walnut dye (or start with an already darker wood) and this will result in the wood turning pitch black like a piano. the issue i have with this video is that it is entirely possible for someone to follow your steps, and end up with pitch black wood instead of an aged look, on top of that it doesnt really look aged, its just darker and more red, with one piece going slightly blackish. you show 4 solutions but dont tell us whats the difference (or ive just missed it), is it more/less ageing or more/less added vinegar? im not sure why you didnt just present the video as a video on ebonizers and instead present it as an ageing solution? it feels dishonest. i apologise for the negative comment, i wish you the best of luck
@TexasArtCompany2 ай бұрын
I appreciate the feedback. Your concerns are valid. I learned that the longer the solution is aged, the deeper brown it gets and diluting the solution with a heavier vinegar is what created the grays. I do agree marking the solutions would have definitely helped follow along with the process, but I also had the thought maybe it generates more than one view when needing to review the process. I apologize if the video was misleading, I am still finding my balance between enough information to give confidence to the viewer and keeping their attention. I will certainly take into consideration your thoughts when creating future videos. Thank you for the support
@ichuggballs2 ай бұрын
yeah thats fair 👍
@NoMan-zw5wb2 ай бұрын
I wonder if it’s the tannins in the wood reacting with the iron oxide in the vinegar solution?
@TexasArtCompany2 ай бұрын
I wish I had a more scientific based answer for you but I thought it was pretty cool.
@NoMan-zw5wb2 ай бұрын
@@TexasArtCompany well I just replied to this and KZbin removed it before my eyes. Nothing wierd. With.
@TexasArtCompany2 ай бұрын
@@NoMan-zw5wb hmmm
@NoMan-zw5wb2 ай бұрын
@@TexasArtCompany I was just going to tell you to research oak gall ink or iron gall ink or ink from leaves. The recipe is easy Tannins Iron oxide The tannins come from wood like oak falls that are concentrated tannin. They react with iron oxide or rusty water and then black. The ink is perminant as it etches the paper with tannic acid.
@NoMan-zw5wb2 ай бұрын
Galls oak, galls…. Spell correction is my nemesis.
@Username-es1iy2 ай бұрын
Just one is enough?
@TexasArtCompany2 ай бұрын
The amount of coats will depend on the wood and end use. Some woods will soak it in depending on their species and how dry they are and may require more coats. You may also want to use more than one depending on how you plan to use the project.
@Username-es1iy2 ай бұрын
@@TexasArtCompany It’s for a seating area should I do 3? 🤔
@jesusmalverde6122 ай бұрын
I accidentally got some on my thumb and washed it off within 40 seconds. Should I be concerned?
@TexasArtCompany2 ай бұрын
I wouldn’t be.
@ProductKingReviews2 ай бұрын
Had some light surface rust on the door. This actually removed the rust in like 60 seconds. Almost instantly. Works really well!
@TexasArtCompany2 ай бұрын
Amazing to hear. So glad I could help! Thanks for the support.
@yawanoc2 ай бұрын
I always found it interesting that the product specifies that it shouldn't be used in gaps wider than 4 inches, but you and other reviewers all seemed to have no problems insulating a standard wall.
@TexasArtCompany2 ай бұрын
For safety reasons, you shouldn’t spray too much at once, but I think it’s more cost related. I recently covered that wall with Barnwood. With that in mind I chose to just spray the whole wall. Figured it couldn’t hurt to have a bit of extra insulation and thought it was a better video. But you are 100% correct I would recommend this for joists and harder to seal areas rather than waste it on larger open areas like I did. For my second kit I did just that.
@gldf1112 ай бұрын
Hi. Can you polyurethane afterwards? Thanks.
@TexasArtCompany2 ай бұрын
I would not mix them. If you’re looking to add a warmer look to the wood look into an oil based poly. That should give you the best of both.
@UnkleAL19623 ай бұрын
I just purchased an old fashioned bread box from an estate sale for 50 cents! After sanding off the light varnish it had and years of crud, I've decided this will be my experimental Linseed oil project. Not a table top so it won't be exposed to harsh influences. I'm hoping for the best to protect my homemade bread. Thanks for your instruction.
@TexasArtCompany3 ай бұрын
Sounds like you got a winner. Perfect choice. Very forgiving finish (easy to work with). Good luck 🍀
@UnkleAL19623 ай бұрын
@@TexasArtCompany thanks for responding it means a lot for a beginner. Your example was well above my level.
@rhkips3 ай бұрын
Didn't even know a product like this existed! I'm still going to call in the pros on my 1100 sq. ft. shop space, but this would be amazing for the little 150 sq. ft. shed I want to renovate and turn into a useable space! Liked, subbed! Thanks for this video! Now to watch some others. :D
@TexasArtCompany3 ай бұрын
Made my day, Thanks for the support 🙏.
@TheMatthewDMerrill3 ай бұрын
Great stuff, seems cheap and easy to do.
@TexasArtCompany3 ай бұрын
Thank you, Not the cheapest but the speed makes up for the coast. 👍👍
@PurpleHayes723 ай бұрын
Change Insulting to insulating. If you want.
@TexasArtCompany3 ай бұрын
Thank you 🙏
@SubatomicSxge3 ай бұрын
Dude i just came here from your linseed video! Im subscribing! Fuckin great
@TexasArtCompany3 ай бұрын
Made my day! Big year upcoming ✌️Thanks for the support
@SubatomicSxge3 ай бұрын
I just found you while researching linseed oil and its uses. Super good quality video man thanks for the content
@TexasArtCompany3 ай бұрын
You’re awesome, thanks for noticing the video work. 🙏🙏🙏
@voidisyinyangvoidisyinyang8853 ай бұрын
I am using this Rust Dissolver right now. It's expensive but I like that it's a gel and 50% water since the chemical reaction uses up water. It's not too strong to CREATE rust (I hope). hahaha. I have used the cheaper 80% phosphoric acid "etching" gallon but it's too strong and flash rusts the metal.
@TexasArtCompany3 ай бұрын
Great feedback, I hope all goes well
@jeffreyjbyron3 ай бұрын
Thanks for this video! What's the difference between Spar Urethane and Polyurethane? Is there a reason to use Poly instead of Spar?
@TexasArtCompany3 ай бұрын
Great question, Spar is an advanced version of a traditional polyurethane. Spar claims to provide more durability and more flexibility to help expand and contrast with the wood over time. I also find the oil based is a bit stronger outdoors with the advanced UV protection.
@jeffreyjbyron3 ай бұрын
@@TexasArtCompany Thanks! It sounds like spar is altogether a better product, so I'm trying to figure out why anyone would use normal poly instead. Cheaper? From my brief research, it appears that spar urethane is thicker, more protective, and flexible, while Poly is harder, tougher, and not as "gummy". Might be that poly is the best choice for furniture unless it's going outdoors?
@TexasArtCompany3 ай бұрын
I tend to agree, it sounds like you have covered all the basics. Poly as always been the go to choice for woodworkers but Spar seems to be a newer more advanced formula that makes up for any shortcomings a classic poly formula may have. It does add a richer "yellowish" hugh that may also be a draw back if the wood is a lighter natural tone. As well as a small cost difference and availability. As the market becomes more familiar with this formula we may find that it becomes the standard. Rust Oleum and Varathane offer a wide variety of both products in many different finishes and I think you have highlighted the need for me to compare them all. Thank you for the support and feedback.
@alanroberts66633 ай бұрын
"Natural river".... 😂😂😂😂
@TexasArtCompany3 ай бұрын
Tricky tricky 😂
@andreibale893 ай бұрын
a natural river... of course :D
@TexasArtCompany3 ай бұрын
🤫 😂
@0x.aisha_minecraft.x03 ай бұрын
*sniff* I smell ... A talented, but underrated artist
@TexasArtCompany3 ай бұрын
Well, thank you. Made my day
@KevinKellyHarrell3 ай бұрын
Congratulations on your success 🎉
@TexasArtCompany3 ай бұрын
Thank you so much 😀
@KevinKellyHarrell3 ай бұрын
Thanks!
@TexasArtCompany3 ай бұрын
Omg 😳 Thank you so much🙏
@KevinKellyHarrell3 ай бұрын
Love these colors
@TexasArtCompany3 ай бұрын
Me Too! Thank you
@thomascopley95913 ай бұрын
Beautiful!
@TexasArtCompany3 ай бұрын
Thank you 🙏
@mydeataylor88913 ай бұрын
Yes
@TexasArtCompany3 ай бұрын
Nice 👍
@loydfamily80463 ай бұрын
I present to you the tripomatic...
@TexasArtCompany3 ай бұрын
😂😂😂
@stjeep3 ай бұрын
perfect for hiding drugs, yes ill take it
@TexasArtCompany3 ай бұрын
🙄🙊
@benreber22773 ай бұрын
I’d like it but step 4 not one so you don’t have to be on the floor to open it.
@ThirdDimensionalBeing3 ай бұрын
You just made a digital footprint of you saying that.
@TheWtfnonamez3 ай бұрын
Admittedly I only use it for tool and axe handles, but I get my best results as follows. One part boiled linseed oil to one part turpentine substitute. I brush it on until the wood has stopped soaking it up. I repeat this process every day for a week. I give it plenty of time to dry out, then wipe with a dry cloth. I am fairly reserved with how much I use. Enough to thoroughly wet the wood, but not so much its dripping or literally pooling. Just brush on enough to soak into the wood, with extra at the end grain as this tracks in fast. Repeat the process either for 7 days or until the wood literally doesnt absorb any more. Its actually a fantastic wood treatment because it kind of "plasticises" and adds strength to the wood fibre.
@TexasArtCompany3 ай бұрын
Thank you for sharing. I also enjoy using it on outdoor tool handles. I find it’s similar to “lotion” for wood. You can keep adding it over time as the wood drys out. It hydrates and moisturizes the wood preventing splitting and rotting. Thank you again for the tips.
@nelsonsantos7703 ай бұрын
It has phosphoric acid which actually etches galvanized metal. Unless you're painting galvanized steel, phosphoric acid will partially remove galvanizing on metal.
@TexasArtCompany3 ай бұрын
Great tip, Thank you 🙏
@argenmadoyazzie763 ай бұрын
Just a random question, but do you think the ultimate spar urethane water based is safe to use for planter boxes? Just wondering.
@TexasArtCompany3 ай бұрын
It’s definitely “safe”, the only downside would be weather resistance. Oil repels water so it’s typically stronger in an outdoor application but oil based products can be tricky to clean up.
@tonebone28953 ай бұрын
Looks good! What size carport is that?
@TexasArtCompany3 ай бұрын
Thank you 🙏, 18x25
@provoking34493 ай бұрын
Those 4x4 in the concrete are gonna rot out quick
@TexasArtCompany3 ай бұрын
Thanks for the heads up.
@MostlyFree-vh1uq3 ай бұрын
Just a few tips. There is moisture barrier that is supposed to go between the treated lumber and concrete it's very cheap and a must. Ordering your concrete in a cement truck is worth it and not much more cost wise. If it was me I'd just frame the workshop as lumber is very cheap now. I just built a 1260 sqft addition for 10k that's framed and sided and roofed.