Can’t fault a guy for using Chevy orange on everything he owns lol
@caseygriswold8617 Жыл бұрын
you forgot to strip the old paint and clean the barrel before adding new paint.
@guybroyles482 жыл бұрын
In my experience, even the best high temp paint can't withstand extremely high temperatures for long. There could be some fairly new products out there I'm not aware of too. It isn't my profession, so I'm no expert.
@wardraven87552 жыл бұрын
Engine paint is only good up to 500 degrees F. VHT high heat paint would be better.
@truthseeker69202 жыл бұрын
your suppose to burn the paint off outside
@th71-232 жыл бұрын
your door looks off centered
@steverowland71632 жыл бұрын
Damn it man
@vonSchwartzwolfe3 жыл бұрын
You did not burn or remove the original paint off the barrel before you put the high temp paint on. So the old low temp paint under the new paint burned off when it got hot taking the new paint with it.🤔
@hanshart3143 жыл бұрын
I have another old barrel to cut up and put inside for a liner . As I understand they burn through the bottom. E bay sells a grate for these because I plan to add some coal, but I may try furnace cement first somehow. Also I am putting up a small metal shed 10 ft from the house and HVAC tube w fan, into the basement. Will see !
@aftech72683 жыл бұрын
Paint didn’t fail- u did not clean the old paint off the drum you need to get to bare metal clean any residue with alcohol then paint Hight heat paint over the bare metal - if you paint over residue or old paint it will fail ! Need to be on bare metal
@wooddawg48683 жыл бұрын
Dude didn’t know what type of paint to use really?
@oldrango8833 жыл бұрын
Why the fuck are you wearing a skirt? And it’s not the paint failing, it’s the user failing to get the right product.
@madman4320003 жыл бұрын
Do they make brick liner kits for these barrel stovess?
@emel604 жыл бұрын
Thank you for the honesty! Great job and keep it hot! :)
@kmjankoski30354 жыл бұрын
The paint failed because you did not burn off the old paint FIRST......you must assemble barrel stove, then light it and burn off all the paint that was on the barrel then repaint with extreme high temp paint.
@matman44224 жыл бұрын
Maybe more of a pants fail.
@michaelpyles58604 жыл бұрын
Choke is to low down the pipe and you have tape on it it will burn that right off hope you aren't using galvanized pipe too it is toxic when burned
@toddh72664 жыл бұрын
Slow down... Slow down the process and keeep it slow and low....
@toddh72664 жыл бұрын
Nice!
@Highnz574 жыл бұрын
Lol. It *was* a pretty sweet paint job. Color scheme looked cool.
@Sky114134 жыл бұрын
Thanks for advice 🌹
@warrenmichael9184 жыл бұрын
well damn !! I went to your channel to see what you did next, LOL only 1 video on the channel haha
@jimdean20244 жыл бұрын
Lose the tool skirt!
@shanedarden3695 жыл бұрын
HVT. MAKES 2000° paint.. But even that will burn off that application. Hell that barrel its self is gonna burn away in about a year
@shanedarden3695 жыл бұрын
DAH!!!!! THAT CAN IS GONNA GLOW RED... How did you not know that...
@gibbie1445 жыл бұрын
Gotta burn the existing paint off first or you wont get adhesion with the hi-temp paint, and try using actual stove paint, fairly certain engine paint isn't rated for a 1000-1200 degree wood fire.
@dynomike19645 жыл бұрын
Should of used a roller
@atbpsycold53805 жыл бұрын
Great build video and hopefully you got the paint issue sorted out. Doesn't seem like a fail to me, stove got nice and hot and will certainly eliminate brush piles year after year!
@kaimas10055 жыл бұрын
or i can make stove of this www.topirankiai.lt/image/cache/data/talpyklos/bidonas-aliumininis-40-l-talpos-1114-600x600_0.jpg its aluminium can hold heat?
@davyr43025 жыл бұрын
I have wasted quite a bit of money on various high temperature paints to paint my barrel fire pit and all of them peel off once steel gets red hot, which happens frequently on thin wall steel drums. Only difference is, those high temp paints don't emit vapors.
@barbararichards60665 жыл бұрын
That's exactly why they sell stove paint, other than that you need to strip any old paint off the barrel prior to using the stove paint.
@tfpvlogsandvids13395 жыл бұрын
Good to know...I'm more concerned about why there seems to be smoke coming from the bottom instead of going out the top. This would be a disaster if it was used inside a shop or something.
@1958indyfan5 жыл бұрын
A little tip: let the angle grinder blade do the work instead of trying to force it through. If the blade does have a crack or chip that is when things can go south.
@1957kwick5 жыл бұрын
I would have never even bothered to paint it in first place. Just saying.....
@reneebrown55985 жыл бұрын
Stove black is the only paint I would use. But honestly they get so hot that no paint is better.
@961blackwolf5 жыл бұрын
Did it smell like a new car
@enola51506 жыл бұрын
only the paint fails, the others work well.
@arctichare81856 жыл бұрын
duh . Anyone who would do that should not be allowed to play with matches.
@matthewjourden10016 жыл бұрын
Suppose to use header paint not high temp that maxes out like 500 and header is like 1500
@waqasitadventures38016 жыл бұрын
I'm pretty sure he did use heat paint .....you see the problem is that he didn't remove the original black pain from it so that burned off under his fresh coat of orange :( still a great project tho ...two thumbs up,for me
@Delta0886 жыл бұрын
I have a saying..Do it correctly the first time or don't do it at all.
@MrBlackbamboo6 жыл бұрын
it looked so cool orange and black
@william446606 жыл бұрын
It ain't a fail if it keeps you warm!
@tonymagallanes886 жыл бұрын
Theirs paint for grill made to be in fire still I think eventually the paint won’t last but look up grill paint.
@jerrybrantley24286 жыл бұрын
Engine paint is not stove paint
@tomh46856 жыл бұрын
Im sure someone touched on this already but here it goes. There are two things that are majorly wrong with the assembly and or construction of this stove. 1. The paint from the old barrel MUST be burnt completely off and the barrel NEEDS to be completely stripped and prepared for high heat paint. This process was skipped. 2. The barrel that you are supposed to use is a sealed barrel. I do not know if you could locate one or not, but that is the kind you are supposed to use. Aside from that everything looks fantastic. You took your time and made sure that everything was lined up and cut evenly. Hopefully you can get the paint issue sorted out and the removable lid doesn't cause you any issues. (that can always be sealed with stovepipe sealant if need be.
@nelsona7796 жыл бұрын
I just did mine over the weekend and I wanted to paint it but I decided not to but what I did was before I put it in the garage I started a fire inside of it outside so the heat with stripped the original paint and didn't paint it I'm leaving it bare metal
@SheepDogNumber66 жыл бұрын
POR heat paint.
@waldo24136 жыл бұрын
you needed to burn the old paint off first
@ROTAXD6 жыл бұрын
First of all, the directions for every barrel stove hit say not to ever use an open top drum as you cannot regulate the airflow/dampen down the fire. Second of all, block paint is rated to what, maybe 450 degrees. The surface of those barrels quickly exceed 800 degrees on an average burn. They'll see 1000+ if you're burning shit wood like pine. Btw...nice skirt there princess. Smh
@tomh46856 жыл бұрын
Its a kilt... nothing wrong with a man who is comfortable with his heritage.