Thank you! This is helpful.

I told you not to play with the matches there.

YES

Nice!!!

This worked for me! Thanks SO much for your great video!!!

I gave up trying to get it to work, I bought an Epson ET-2850 printer. The printer served it purpose but I will never buy another HP printer unless it is a Tank Printer and a real good price.

I have tried all the tips and suggestions and still can not get mine to print, printer head is still not detected. I don't want to buy a new printer but it is a 140 dollars for a new head and ink, new printer is 150. Has anyone figured out the real cause and fix for this?

what if it does not have the c port to connect on apple tv?

Don't buy HP

good video. minor error... The charge port is not standard, as they seem to use whats called dual rail supply so it has + volts, ground and - volts from the plugpack. Or at least the 2 I inspected here in Australia do.

Will the induction burner work with any pot or does it have to be a pot made by Copper Chef? I see 2 other people asked similar questions. So yes, it would work best with the pot that comes with the burner but what if you dont have the pot,only the burner? A copper pot would work? Or an induction compatible pot as you say to one viewer but how can one tell an induction compatible pot from one that isnt?

Camera jib connected to workbench = seasickness for viewer 🤢Otherwise very useful video, thanks.

That was really useful, thank you. At my HP officejet 4622 has been that problem long time, and finally I fix it . I had to take aport but everything working 👍

Can a stainless pot work or does it have to be copper.

this should be a class action lawsuit against HP. absolutely ridiculous!!

I tried this on my 8600. It did not work. I then ordered a new print head, and it did not resolve the problem. I then took the printer apart, found a component on the main board had a burned hole in the center of the component. Did a lot of research and found the part description and number. It was one of the print head interface chips. Purchased a new part from a discrete component reseller from overseas, installed the part, I do not recommend doing this unless you have the training and equipment to replace surface mount components, reassembled the printer, and it worked with the old and new print head. Again, this is not a normal repair that just anyone can perform. I have years of experience repairing equipment with surface mount components including VLA, only because I have the equipment to do it with. The cost of the component was not that much, but the labor time made it cheaper to purchase a new printer.

QR Codes are a scheming Gook-Gov pile of nonsense. Don't use them ! Support them at your own risk (You will become a communist robot)!

Does not come out the same for a 6600 series, which looks about the same as your printer. No gray bar to lift up.

Thank you! This was SO helpful!

I have two HP 8610 printers. I had one show up with the missing or not detected printhead. I've used it a LOT and could understand if a part was worn out. However, the second is a bit newer and not used as much. It was my son's from his time in college. When he moved out he didn't need it so left it for us to use. I plugged it in to have a working printer and a couple of months later it has the same issue. I'm wondering if this is a fault from an upgrade? I cleaned the printhead and did some reset I found. It worked for a few prints and then failed again. I even bought a new printhead and tried it but it would not detect on either printer. Somethings not right here. :-( I keep forgetting to call HP to grill them about a possible issue with an update.

Had same message and found one of the colour cartridges ink had dried up and was empty. After replacement fixed problem but would also suggest you clean the printer head by pulling out the unit after removing the cartridges and just use paper towel and hot water. Printer works like new.

What's Facebook 🤔

WOW! I didn't have to open the board just pulled the printhead out, turned it around and noticed the ink all over the connections... cleaned off, inserted back in and VIOLA! It worked! Thanks!!!!

Everyone sitting In everyone's home through a window in the hand. This is reality now so make a video let us know where you stand. Virtue signal or creep loud, do it with your voice too high to be snuffed and blind eyes staring down. Tik tok click glock blow us all away. Soon the moon will be blood and the light of the sun will be black shade.

No one has gone down on me in a while....

We appreciate you Greg. 😊

This worked for me! One of the springs jumped out onto the floor when I took the board off. After a few minutes of crawling around to find it, everything went back in and now it prints great again.

Ecelant very nice

If you browse to the printers own website on your home network using it's ip address in a Web browser. It can give you a hint what the issue it. Mine was the magenta ink cartridge.

Thank you so much. Worked on my first try (had to wait a day because I had to order the Torx bit from Amazon). Asked for paper and then calibrated the printhead.

Sir how much it's operating voltage I lost my adopter

Can u use it with a regular pan

I think thats what an 8600 of 8610 or 8620 is worth when its giving this message and useless is about $10 dollars.But unfortunately I didn't know all that and gave $50. I've learned a few things of what to try and what not to. I tried a reset to see if it would make the missing print head go away. I think with the partial reset I could get into the rest of the icons if i wanted to scan or something, But i still couldn't print as it would give the same message. I think I did the full reset and that halted everything as the menu could not be brought up any more. couldn't go past the message. The thing is that was even worse. If I wanted to pull the printhead. I couldn't now, because the the head wouldn't move over to the left when opening the print door. So here I was Locked on that message missing print head. nothing else in the menu would come up & the carriage wouldn't move left to work on it. So I pulled the wrong end panel off as I thought the green pcb board was on the right hand side like the 8500. they switched sides. So I pulled the end panel off the (left hand side) . I was looking for leverage to turn that shaft, that goes all the way across. And on the (printed circuit board) end I found it. There 's a white plastic gear on it. But it was to hard to reach, so I put a vice grip on the end of the shaft ( sticks out plenty far enough). One direction it wouldn't really turn, "hardley at all", (DON'T FORCE IT) but the other direction it did. So I turned it ( not knowing what I'm doing) and turned it some more . I was trying to see if the carriage would move. I didn't see anything. So I took the vice grip off. But!!!!!! When I reached my hand in there like, I did, several other times before. to tug on it a little, to see if it would come away from the far right. ONLY THIS TIME IT DID! So now it's back to the LHS where I can, "get it out of there", and try this method with either alchol and cue tip. or the eraser. And now with the head over Finally. I could also order a ebay new head, If I decide too.

Lastima no haber tenido Bluetooth esta excelente y perfecta bocina, nunca mas Bose hara las cosas tan bien como en tiempos pasados

I tried this and it didn't work. I bought a new print head and it still says print head is missing. Is there something else I can try to do?

You're a lifesaver! I don't know anything about printers, so I didn't know you could just remove the thing with all the ink cartridges in it. I took this out and then put it back in and that fixed the problem for me. I had been printing business cards and half of a sheet got stuck. I got the printhead message after removing the business cards. Thanks!!!

many thanks sir!! she's laying down ink properly again!!

Thx for the advice, I was able to revive my HP OfficeJet 8730 😀

Thank you!! This worked!!!! So happy❤🎉

Genius! Thank you!

8740 just started doing this. It’s definitely not a hardware issue…

Thanks for this. I just reseated the printhead - something I learned from this video - and ended up not having to even clean it.

Perfectly explained.....just one question. Does the base hold the bottom of the grill locked in, or can the grill be just eased off.

Thank you thank you thank you! I was sweating bullets!