Hi mate been a while I know since you done this video but … do you reckon this kit would work better than the injen ? Was considering swapping out my injen for it Many thanks 😊
@Matty_Champwhite8 күн бұрын
@@steffanevans-hughes4467 it would make power over an injen, but requires a little more work with breather deletes etc and will 100% require a map to set the hardware pipe diameters up if your cars not mapped on speed density. (Injens only 2.5” whilst this things 3”) so sensors need re setting up
@steffanevans-hughes44677 күн бұрын
@@Matty_Champwhite legend cheers for that, I’d like to give it the best intake I can as I’ve got DC cams RRC inlet 421 etc so I’ve got all the bolt ons, just feel a better intake may help. Then Possibly port the RRc to 70mm also … It’s been mapped to above mods on the good old ECUtek , so I’d definitely take it back for a fine tune when I change it over Legend for your champ white aswell 👌💪 Hell of a machine
@karlpedersen722 күн бұрын
Ahh damn don't do Instagram or fbook🙄
@gvue439623 күн бұрын
GT widebody
@iizhamizham5250Ай бұрын
Look so tuff engine bay👍🏻👌🏻,💪🏻
@Springwater786Ай бұрын
Did you find you had vibrations in the clutch pedal when changing gears in VTEC after fitting the bypass line.
@kickassazАй бұрын
Yes you do at high rpm - I do with mine. Probably from 7k onwards buddy.
@Springwater786Ай бұрын
@@kickassaz thanks, yeah that's where I'm experiencing it took, glad it's normal then.
@kickassazАй бұрын
@@Springwater786 yeah mate. I'm on the original clutch at 80k miles. Soon to be changed but I doubt it will cancel the vibration. My engine is polybushed too.
@Springwater786Ай бұрын
@@kickassaz I'm on 85,000 miles and replaced the clutch a few months ago, standard engine mounts though
@kickassazАй бұрын
@@Springwater786 ah yeah it's fine mate. I got my selector springs and detents done soon
@mazjapАй бұрын
Every time you need to clean or check your filter u have to take the bumper off ?
@Matty_ChampwhiteАй бұрын
@@mazjap no mate just jack up the passenger side and unscrew the arch liner 10 min job 👌
@djotenjdm7213Ай бұрын
Hey man, think I'm on the same boat now. Left side isn't doing anything with hand brake on, but work when pedal is pressed... so happy days 😢😂
@Matty_ChampwhiteАй бұрын
@@djotenjdm7213 you can get a wrench on the handbrake mech on the rear calliper itself. If the mech has totally seized it could be a calliper issue. If the mechs free cables are a good bet
@djotenjdm7213Ай бұрын
@@Matty_Champwhite I managed to free it up, the handbrake part was seized on the caliper. Cables work perfectly now. Cheers
@stefanmills22662 ай бұрын
I have issues going into second would these springs be the issue ? 1.8 type s
@Matty_Champwhite2 ай бұрын
@@stefanmills2266 these do help engagement, but most likely worn synchros in your case, sounds like a gearbox rebuild job
@stefanmills2266Ай бұрын
@@Matty_Champwhite great news 😂 thank you
@stevenwilkins36872 ай бұрын
I have the Autoglym kit, anyone used it on here??
@henrir43622 ай бұрын
About to do the bumper myself for fog light replacement.What kind of clips, screws, etc connecters would you buy in advance if the broken clips need to be replaced?
@Matty_Champwhite2 ай бұрын
@@henrir4362 I’d buy a selection of push fit clips either from Honda or eBay as you’ll 100% break some of your haven’t had it off before. Search on eBay for Honda clips and you’ll see the variety
@Matty_Champwhite2 ай бұрын
@@henrir4362 if you wanted the exact ones you’ll need to speak to Honda parts but you’ll pay 10x more
@Luisen15092 ай бұрын
1:48 do you have it to sell? I am looking for the Left light, is going water in.
@Matty_Champwhite2 ай бұрын
@@Luisen1509 I did do but stopped them about a year ago. Message me on insta and I’ll send you my blueprints over to make your own
@garethtaylor80182 ай бұрын
Brilliant vid doing this today right side stayed on and was smoking driving on the m62 chancing discs and pads while doing the cables
@Matty_Champwhite2 ай бұрын
@@garethtaylor8018 yeah man they are getting to an age where this shit can happen. I just had one side not working at all. Was well hairy parking on hills 😂
@kkronic67092 ай бұрын
Anyone wondering, #voopoo has gone away with the really leaky TPP coils, to the new and improved #Dragx2 with #PnPx coils which are the best by far on market
@buck36552 ай бұрын
Filter maintenance and that's will be a pain in the arse
@Matty_Champwhite2 ай бұрын
@@buck3655 5 minute job, not sure who’s been feeding you that information. 3 screws and a couple push fits on the arche liner. Done 👍
@djcaymann2 ай бұрын
what was the spec of the multimedia? ram and cpu?
@Matty_Champwhite2 ай бұрын
@@djcaymann trash trash and trash don’t buy it
@djsthemetereman3 ай бұрын
I have the bottle style & want to make it shorter
@sochiscott59513 ай бұрын
😎
@Ashmansdetailing3 ай бұрын
I understand you don't recommend this radio, but I have just got a different android unit which I am struggling with steering wheel controls. Same car set up as you. What did you have to do to get the steering wheel working?
@Matty_Champwhite3 ай бұрын
@@Ashmansdetailing connects 2 control box is needed to interface with the steering wheels controls
@Ashmansdetailing3 ай бұрын
@@Matty_Champwhite thanks for the reply. did you connect with CANBUS? And which setting did you select into the Factory setting on the Head Unit? I have the contect 2 but still struggling
@KrzysVTi3 ай бұрын
Near my house, I probably heard it at the time! 🤣
@Matty_Champwhite3 ай бұрын
@@KrzysVTi great blasting road hahah shocked there isn’t cameras on it yet!
@KrzysVTi3 ай бұрын
@@Matty_Champwhite Give it time haha!
@hkgkagami4 ай бұрын
Hey do you know if the fn2 and fd2 type r shifter cables are interchangeable? Seems no aftermarket brands have shifter cable kit for fn2… my shifter cable is bent and will need to be replaced anyway.. but honda genuine stock one costs almost the same as the hybrid racing one so wonder if theres any solution to use one of the cable kits from them.
@Matty_Champwhite3 ай бұрын
@@hkgkagami I know the cables are likely different as the aftermarket ones list a different part number per models. Little help sorry
@Springwater7864 ай бұрын
Were you on standard springs, i have tein springs fitted to mine but tempted to stick the standard springs back on, ive forgotten if it was more comfortable with the standard springs.
@Matty_Champwhite4 ай бұрын
Tried them all went back to a stock for ride height, issue with my area is speed bumps and 3” exhaust catching on everything! Teins are way way more comfy that eibach though and less ‘crashy’ than OEM
@m17dve4 ай бұрын
Great video mate gonna tackle my milano red one this weekend 👍 what polish did you use mate?
@Matty_Champwhite4 ай бұрын
Rupes DA green that was mate heavy/medium cutter
@craigkift31344 ай бұрын
Great video
@guilhermetelesalves73285 ай бұрын
Foda
@davidgriffiths20845 ай бұрын
Great video. Just wondering was that normal silicone paste you used when fitting the new hub ?
@Matty_Champwhite4 ай бұрын
It’s actually sachs high performance grease, autodoc stock it
@blade87685 ай бұрын
Im interested to know how you remove the battery if it died on the supercharged FN, it looks stuck behind that supercharger
@Matty_Champwhite4 ай бұрын
Yeah it’s wedged in there on the shaft driven ones. It’s a lightweight half size thing too.. Scuttle tray off, it’s a bit of a faff to be honest so make sure you fit a decent one!!
@timlindsay70475 ай бұрын
Just got one of these in a DragX Pro kit here in the US. Took me forever to figure out why this tank was different! Thanks for the video or I'd still be wasting time trying to figure out why this pod was different from all the rest I have!
@Riki19765 ай бұрын
i need to install new guard. in the inspection there was a repair prompt for it. the old one is already crispy and almost gone. we have an inspection in Finland every year.
@shazzy85_665 ай бұрын
S&T?
@Matty_Champwhite5 ай бұрын
SPICOP/Planner mate haha
@shazzy85_665 ай бұрын
@@Matty_Champwhite haha. Great vids mate, watched them all and the dynodaze ones. You’ve got a beast there! Had mine for over 12 years but fully stock ☹️
@Matty_Champwhite5 ай бұрын
@@shazzy85_66 currently looking for the next project this is done now
@Palafury6 ай бұрын
Hi Matty, I'm new to replacing parts myself and looking at your videos to changing stuff. I've recently changed my front and rear pads/discs my self with brembo's and it's been mega fun. I've had a recent MOT advisory for nearside front suspension arm in/bush worn but not excessive movement. I'm looking at just replacing the control arm alltogether, but I should also do drive side at the same time. What control arm did you get, and did you end up getting the poly bushes? I was thinking I might as well replace them all whilst it's there. It's something I'd rather order the parts andget this done at a garage as I don't feel comfortable to do it without the correct tools from videos I've seen - I've seen getting the polybush in is an absolute balls job without the right piece of kit. You reckon it's worth replacing the anti roll bars whilst they are working there as well? Cheers!
@Matty_Champwhite5 ай бұрын
I chucked a full poly bush kit in mine same time as new lower arms and heavy duty drop links. All acquired off autodoc, I’ll drop my shopping list on here. Those poly bushes can be utter B**tards so I left that to the garage haha
@Matty_Champwhite5 ай бұрын
Refresh Here's a list with part numbers of all FN2 parts used in the refresh, some OEM some upgrades. SNR top mount kits with bearings - KB674.03 MEYLE roll bar drop links - 31-16 060 0002/HD SACHS LH front shock - 313 593 SACHS RH front shock 313 594 SACHS REAR either side shock - 317 471 Honda rear shock mounting bolt - 90172-SAA-010 KYB K-Flex front spring (stock height) - RA4022 KYB K-Flex rear spring (stock height) - RA7080 Impercom dust boot kit - 50925 Eibach pro spring kit - E10-40-011-01-22 Moog LH wishbone - HO-TC-5730 Moog RH wishbone - HO-TC-5731 APEC track rod end RH - AST6548 APEC track rod end LH - AST6547 ABS Hand brake cable - K12097 ABS Hand brake cable - K10788 Yellow stuff road race pad FRONT - DP41254R Red stuff road race pad FRONT - DP31254C Red stuff road race pad REARS - DP31902C Yellow stuff race pad REARS - DP41902R Drive shafts sourced through www.jandrcvjoints.co.uk Poly bushes, hoses, fittings www.Dynodaze.com Discount code matty5 NGK iridium IFR7G 11ks -For NA BKR-8EIX -For Boosted as they are a step colder. Matty Champwhite
@sampsalol6 ай бұрын
Do you think the splash guards are necessary? The nuts on my splash guard are corroded to hell and I'm contemplating on just not installing the new ones I bought.. Doing a brake job so I thought I'd replace the guards as well but turns out it's not so easy.
@Matty_Champwhite5 ай бұрын
They play a role in keeping the disk clean for sure, bit not a chance I was paying £100 for them. Paid less for the disks pads and bearings!
@bringman236 ай бұрын
I have got the civic 2008 with the satnav screen next to the clock screen and I couldn't find the cable to connect it to this unit in the sellers page. Does anyone know where to get it from?
@Matty_Champwhite5 ай бұрын
Connects 2, mine came with it
@bringman235 ай бұрын
@Matty_Champwhite I just purchased one (after I commented here) and all works fine except for the top screen. The seller is asking me to connect everything properly which I did. I just don't know which cable exactly is the one for the top screen to double check. The seller confirmed that it was supplied in the package
@Matty_Champwhite5 ай бұрын
@@bringman23 the connects two that controls the top screen is the cable with the black box of tricks on it. That’s the canbus modal that connects with the car, and what’s known as the connects 2
@bringman235 ай бұрын
@@Matty_Champwhite brilliant!! I'll check that cable! Cheers!
@leightonlewis22536 ай бұрын
Looks great,where did you get the bonnet strut from?
@Matty_Champwhite6 ай бұрын
Ali express hahah they are only about £25
@LeeloBaggins6 ай бұрын
Many thanks 👍🏻
@joshwattonS20006 ай бұрын
Where did you get the Fog Scoops?
@Matty_Champwhite6 ай бұрын
Company called fat man scoops on eBay mate
@hectorperez15286 ай бұрын
Where you got that kit? I can only find the one with the intake manifold
@Matty_Champwhite6 ай бұрын
It runs on the stock RSP manifold, this one if you Google it is a TTS Shaft drive rotrex kit. Should show you what you’re after 👍 And it’s the best kit for a road car with options to fit any size charger
@Omar_Hakeem6 ай бұрын
Wild
@shehzadatif17 ай бұрын
its easier and more efficient to use nut extracter than grinding.
@Matty_Champwhite7 ай бұрын
Yeah if there was one at hand then it would have been, but would have been far less efficient as we didn’t have one.
@tiago10alves107 ай бұрын
Hi somebody has the link to buy the foam?
@Matty_Champwhite7 ай бұрын
Course this is the good stuff mate amzn.eu/d/5FYHgQW
@MissionKid7 ай бұрын
I just got it delivered and used the same magnet best phone holder I’ve ever had thanks for the tips
@diannerobinson40157 ай бұрын
Hi I am in Ausralia and need some for my daughters Honda Type R 2007-8 Mondel will these it it? As I cant find the length of the Mercedes ML ? ones Many Thanks Di
@Matty_Champwhite7 ай бұрын
These are super strong might be too strong for her to close. When you have a mugan spoiler the extra weight counteracts this
@diannerobinson40157 ай бұрын
Many Thanks
@leemurphy2657 ай бұрын
What's the make and model of the android system? I've just purchased a honda civic and I'm thinking of replacing the system
@Matty_Champwhite7 ай бұрын
Don’t get this it’s not great at lasting very long. Was a China special. Get a branded and a connects 2 patch lead
@leemurphy2657 ай бұрын
Which would you recommend?
@Matty_Champwhite7 ай бұрын
@@leemurphy265 anything Panasonic, Sony, pioneer with Apple car play/android auto really modernise the civic
@MegaElias19847 ай бұрын
I have the cable too loose, I really need to tight that 10 screw almost to the limit. How do I fix this?
@Matty_Champwhite7 ай бұрын
You fix that with the adjuster in the car under the centre console from inside. If that doesn’t work the cables will need replacing 👌
@MegaElias19847 ай бұрын
@@Matty_Champwhite I just stretched the cable to the end, in the caliper, than started adjusting in the adjuster. For now it's working
@bharatmodi67127 ай бұрын
Nice video.. how does this cw fn2 compare to the r26? Need my next car and can't decide between them both.
@Matty_Champwhite7 ай бұрын
R26 everyday of the week, our handles out performs the Fn2 in every way. BUT the R26 is very unreliable
@bharatmodi67127 ай бұрын
@@Matty_Champwhite thanks. Will go for the r26. Since will be a part timer
@Matty_Champwhite7 ай бұрын
@@bharatmodi6712 100% make sure it is a proper R26 too as the normal megane 225’s didn’t have the limited slip diff which would make them worse than the fn2 CW. Very easy to get a megane to 275bhp/300 ft/lb (the safe engine limits on the F4rt) like mine was, to get a civic there you’re talking thousands and thousands
@limbo54638 ай бұрын
Could you use these without a mugen wing? My boot struts are knackered but just got the standard spoiler on mine
@Matty_Champwhite8 ай бұрын
You sure can mate, but a bit tougher to close but opening is a dream
@limbo54638 ай бұрын
@@Matty_Champwhite thanks for that, mine are awful at the moment so I'll get some ordered!
@user-sq4mg3lb4b8 ай бұрын
Hey Matty…. Have you got the link to the templates on eBay?? Can’t seem to find them and link in description doesn’t work.
@Matty_Champwhite8 ай бұрын
Email me on insta mate and I’ll get you some blueprints sorted, had too many idiots not reading what they were for on eBay so had to take them down
@Matty_Champwhite8 ай бұрын
Matty_champwhite
@kidchig8 ай бұрын
hey, I have th exactly same setup in my civic fn3 2.2ctdi, but my satnav is stuck at language because there is no button to control and the clock display isn't displaying , do you know any fix?
@Matty_Champwhite8 ай бұрын
Your connects 2 lead is likely faulty or the interface itself. My connects 2 lead stopped working after 2 weeks, lost all functionality with the steering wheel and the top screen went blank. I replaced it and it was fine afterwards 👌
@kidchig8 ай бұрын
@@Matty_Champwhite I didn't know the stereo already had a connects2 cable inside, I thought it was aftermarket too.
@Matty_Champwhite8 ай бұрын
@@kidchig mine had a genuine connects 2 cable included with it mate, it will work without one, but no functionality will work with it. If you haven’t got one it’s worth trying one in there if your head unit supports it 👌
@marcothorsen9508 ай бұрын
Good vid , but could of filmed the practical work instead of explaining it..
@Matty_Champwhite8 ай бұрын
True never intended on making it a video as it was an experiment. So had to make do. Was a guide for the Facebook crew
@MissionKid8 ай бұрын
Ah mate you should of filmed it taking off those plastics without breaking them is a headache have to be so carefull and know where to pull and where not to
@Matty_Champwhite8 ай бұрын
Never even thought as they were that easy to remove, literally 20 mins to get both sides out
@MissionKid8 ай бұрын
@@Matty_Champwhite just going to wait until it’s a bit warmer I’m scared of snapping the plastic
@Matty_Champwhite8 ай бұрын
@@MissionKid that’s not a bad shout to be fair mate, won’t be long now
@moncefalouane8 ай бұрын
Where did you get the headlight restoration kit?
@Matty_Champwhite8 ай бұрын
I used Rupes DA polish and standard wet and dry paper. Kits are overpriced