Hey man Great video Would u mind making one for cloning FRm as well
@anthonyhunt6765 Жыл бұрын
Hi I follow all these steps but when I tell it to run it says error ? Any ideas? Thanks
@FailofWar127 Жыл бұрын
what about HU_NBT? I have HeadsUp Display, do I need to code anything besides kombi?
@floxyflo9835 Жыл бұрын
Hallo..I had some issue. But I'm not able to read EPROM. I had only NCS, INPA and DEEP OBD. Some tricks to solve the issue? Thank you
@krugbmw9150 Жыл бұрын
Yep, it is 1 trick available. Get to dealer and order new module.
@floxyflo9835 Жыл бұрын
@@krugbmw9150 mmmm a bad trick this one. :-) . In case of a second hand module available, it has to be coded or it will be justa plug and play? Thank you
@EEisenАй бұрын
@@krugbmw9150 Does it need programming if I buy a new module?
@krugbmw9150Ай бұрын
@@EEisen yes
@DatM135i Жыл бұрын
Could I connect in team viewer you to reset a short circuit counter in headlight driver module(TMS)
@hardeepnagra6262 Жыл бұрын
Hi, i have 6wa cluster from 2015 F30 to go into my F31 with entrynav2, i have most cable from entrynav2 to ckuster to fit, currently have 6waa crappy cluster, so i remove 6waa from vo and add 6wa and code kombi then detect cafd and recode kombi? With most cable connected from HU to kombi? Thanks
@SanDoval201970 Жыл бұрын
Can you do this with f series or do I need esys????
@Hannnnnzi Жыл бұрын
Thanks for the video. How do you select the CAFD file? There are too many similar files.
@1ColdfFire Жыл бұрын
I bought an e83 with an old style key and the buttons don't even work. I'd love to get this done if you have a business and it's not hugely expensive
@derekkchung Жыл бұрын
So, how did u get the clear file?
@MuhammadBilal-qh3dc Жыл бұрын
It's witch software and haw can get ? Thanks
@headliner49362 жыл бұрын
Is this process the same for BMW F20 2013 extended KMBI? Or there is just one eeprom? Found info about only one eeprom in F20 kmbi.
@fito.chiari2 жыл бұрын
Hi, i have an used 6wA from a F01 and now i have a F10 that i want to use in it, with this coding is possible?
@danielpacurar26442 жыл бұрын
Incorrect data record code, wrong power class, job not done.
@e90lownslow143 ай бұрын
Changing power class is easy. Just match the power class in the used dme to match the power class in your cars cas module. Read cas using ncsexpert and write to dme with ncs manipulation profile.
@vehbihasani33382 жыл бұрын
I have already done the retrofit on my f30 diesel engine to 6wa cluster but after coding I had the tamper dot because of the vin mismatch and when I tried to de solder the eeprom chip to virginize the cluster I broke the chip. So I went ahead and ordered another 6wa cluster but this time I ordered one from a petrol engine instead diesel and now I’m having a lot of errors. And the car is not communicating with the instrument cluster very well only mph gauge is working well, nothing else. I have virginized the cluster but still not working. Anyone can help me with this.??
@jttuning51182 жыл бұрын
Hope this is any help I'm assuming u didn't read any data of the chip of the original cluster. If that's the case you can program/code in a petrol cluster but it has some communication issues based on my f21 and f30. Best would be to order the correct cluster for your car and get it virginised or do it your self if u can and then re code the cluster. I have done it once or twice but honestly its not worth the effort.
@anthonycasso49102 жыл бұрын
Broo you helped me code my cluster, you are the best. Thank you so much.
@YoungIncoMusic2 жыл бұрын
No explicar muy bien
@TheAl3xyno2 жыл бұрын
but the first step is the second.you have to virginize the kluster.or you have to buy it new
@krugbmw91502 жыл бұрын
Meate u bit late with your coment, read title and than coment.
@waltronics432 жыл бұрын
Hi where can purchase that bmw explorer software
@krugbmw91502 жыл бұрын
en.auto-explorer.com/shop/
@Saqib.S2 жыл бұрын
Alex have helped me plenty of times. Without him i would litterly have an question mark car lol. Great video sir and thank you!
@sven84272 жыл бұрын
Hi, I used the same key for an E83 X3 (07.2007) and programmed with an AK90+ (EWS4.3). Everything is working but the when pushing the close button, the mirrors fold in only sporadically, so need to push several times and it sometimes needs a long time until it works. Fold out works always. To close/open the windows with the remote control works nearly never. I got it to work 3 or 4 times in weeks, tried it every day. The original key is working fine including the windows and mirrors function. I think it is caused by another timing of the radio signal that the remote uses, the original key seems to use another timing when pushing the buttons long. Maybe do you have an idea or a solution?
@krugbmw91502 жыл бұрын
Look in to coding.
@xxkillerxcamarox2 жыл бұрын
After hours of trying to code my 6wa using all these other guides online, this video was the only thing that worked. And it was by far the easiest I’ve seen yet. Thank you.
@gtp982 жыл бұрын
You and me both! I was so frustrated because I followed the other ones correctly and it wouldn't work til I used this.
@TS-mv8ws2 ай бұрын
Did it automatically adjust your mileage?
@xxkillerxcamarox2 ай бұрын
@@TS-mv8wsit’s been a long time but I think I coded the mileage on the eeprom. I had to take the cluster apart and desolder the chip and re-write some of the hex in memory. But I don’t remember if that was for the mileage or not to be honest
@viridian69032 жыл бұрын
Does the fem/bdc have short circuit reset for lamps
@viridian69033 жыл бұрын
does the explorer support all sw levels for e70
@jon63383 жыл бұрын
Hi! My F30 shows short circuit for the trunk. Any idea what causes this?
3 жыл бұрын
How to know which prg to choose?
@SarmadAlraed3 жыл бұрын
thank you boss, this vid helped me for smth I missed out of me but I wondering what VO option I should to delete then add 6wa to car vo? thank you for help sir
@avellocaos91333 жыл бұрын
How clear?
@bpais523 жыл бұрын
Hello, I'm very imprisoned very good work. Do you think it's possible help me to clean my errors please? I don't now were is my short circuit.
@luv_xxx27703 жыл бұрын
hi it work with bmw F15 X5 2016
@krugbmw91503 жыл бұрын
Not anymore
@omarsutherland77133 жыл бұрын
Hi, i did that on mine and it starts that car but the key fob doesn't work to unlock and lock the doors with the buttons. Any advice?
@krugbmw91503 жыл бұрын
Use Google how to sync remote
@rebinkeztay53993 жыл бұрын
Hey! So my f82 m4 has a fem body angel wye issue due to water, can you reset my fem and code in my adaptive headlight module? I am willing to pay you for your time!! Please get back to me
@rebinkeztay53993 жыл бұрын
If we could use team viewer that would be beautiful
@mihailpavel6763 жыл бұрын
Works on my e90 for drl right side ....thx
@karbei123 жыл бұрын
Work on bmw F20?
@daggo33 жыл бұрын
You did not change the VO(FA), I mean you did not add 6WA to VO. Am I missing anything?
@krugbmw91503 жыл бұрын
U are missing something 😅
@daggo33 жыл бұрын
:) I am new in the business, can you please enlighten me? I appreciate
@w1nkler58110 ай бұрын
@@krugbmw9150you already had 6WA in the VO correct? That is the reason you didnt change it.
@luv_xxx27703 жыл бұрын
thanks sir
@luv_xxx27703 жыл бұрын
ok sir give us a name of web
@luv_xxx27703 жыл бұрын
sir i use not found please please help us can send link
@krugbmw91503 жыл бұрын
Sorry I don't supply software or hardware
@luv_xxx27703 жыл бұрын
Total Commander
@luv_xxx27703 жыл бұрын
sir thanks for video but how to download Tatal commander
@krugbmw91503 жыл бұрын
Use google
@o.ko.k75503 жыл бұрын
this key is HU92 WITH ID 44 TRANSPONDER ? 433MHZ? EWS3 IS THAT CORRECT???
@michaelhuertas86233 жыл бұрын
Hey man, looks like you got this down, I have errors with short circuit but I need help connecting with my frm unit inpa and tool32 keep having errors they cant connect to that module how do I wake up or make it connect? Please help
@krugbmw91503 жыл бұрын
FRM probably dead or u using wrong prg.
@ldee2473 жыл бұрын
Hi, I have a problem with BMW X3 E83 2.5i 2004 drivers side low beam not working and I'm kindly asking for your help. I changed my original headlights to Angle lights and only the driver's side Low beam has stopped working. I tried changing the bulbs but still, it didn't work I have also swapped the headlight units from left to right and realised the problem lies on the right-hand side as both lights only work on the passenger's side. I bought the K+DCAN with a switch and have installed BMW INPA software on Win 10 but I'm stuck on which FRM _ counter short circuit modules that need resetting as mine it's an E83 2004 model. How can I know my FRM_ if its FRM_70 or _90 or LSZ_prg before diving into Tool32. Any help I would greatly appreciate... Thanks
@krugbmw91503 жыл бұрын
That technick doesn't apply to e83
@ldee2473 жыл бұрын
@@krugbmw9150 Oh okay would you know the best way to go about it on e83?
@mohammadsiddiq61573 жыл бұрын
Hi Which software you use for this programming?
@xcheats01243 жыл бұрын
Is it possible that I can also connect with you on team viewer so that you can reset my code?
@krugbmw91503 жыл бұрын
Yes
@qenzxy2 жыл бұрын
hello I am French it is possible to help me code and reset short circuit because I no longer have high beams please thank you
@Jeff0713 жыл бұрын
Could i connect with you on Teamviewer so you could take a look at my BMW E90. i also having a Short Circuit Fail. I'm not very tech savy