Пікірлер
@MacKinnon2k13 Күн бұрын
What kind of mesh tape did you use?
@jesseoliva197 Күн бұрын
Useless video.. 😂
@ronandoyle6097 Күн бұрын
Nice. Now they just need to demo the rest of that nasty bathroom and they're all set.
@jls2966 Күн бұрын
Thank you!
@chofbrighton7014 3 күн бұрын
Excellent video. Appreciate your sharing this valuable information and your skill.
@jfjc5694 3 күн бұрын
Ok what did you clean it with?
@the_purple_kat 4 күн бұрын
How would you approach a shower pan that has a textured surface around a small crack, not a smooth one?
@loudlifetmproductions3098 6 күн бұрын
It’s made cheap mine shut down after 2 uses
@DPTubs 6 күн бұрын
@@loudlifetmproductions3098 wow that’s hard to believe! I’ve used it on about 7-8 jobs now! Keep the body outside the room so you allow clear and positive air flow through the filters.
@jonhansen100 7 күн бұрын
Can't believe the overflow plate wasn't removed prior to prep and refinishing. My guess is that will fail/rust in short order.
@urbsasusual 8 күн бұрын
What a waste of water! Use a bucket.
@DPTubs 8 күн бұрын
@@urbsasusual what a waste of words..save your time!
@hellekson 8 күн бұрын
How much of the product did you need for one tub?
@BeastmodeLLC. 9 күн бұрын
Hi! Is there anything else that can be used for adhesion promotion? The product you mentioned above is super expensive now and the projects I'm doing aren't worth that much money. Can you achieve a good adhesion without it or a cheaper brand?
@DPTubs 9 күн бұрын
@@BeastmodeLLC. acid wash / plus primer / plus top coat and you will Be fine
@TheAZjohnny 9 күн бұрын
Best tub video on KZbin.
@DPTubs 9 күн бұрын
@@TheAZjohnny keep watching them all thank you!
@vegasLo702 9 күн бұрын
How long should this last?
@jhonramirez9083 9 күн бұрын
What a good video, where did you buy it? I couldn’t find it, thank you
@harishbhasin7395 10 күн бұрын
Please give list of items used with there make deta. Very good work dome.😅
@harishbhasin7395 10 күн бұрын
I want to know what paint to be used for finishing?
@user-uj1yb7ss1t 11 күн бұрын
Can I used this method to fix my hairline cracks in my sink?
@TammyHefley 13 күн бұрын
Will the same filler and paint work on a cast iron tub. There are a couple of big chips just not down to the cast iron yet.
@OlmanFernández-d5k 14 күн бұрын
Que video más mal hecho no se vio nada 🤮🤮🤮🤮
@FPSdoug888 14 күн бұрын
Would love if you had some time info in the video as in how much time you had to wait between steps. Guessing there was some dry time between the foam, the bondo layers, paint layers etc. the video made it seem like you did one after the other.
@DPTubs 14 күн бұрын
@@FPSdoug888 understood! I generally mention it in other videos as well
@abelgarcia6992 14 күн бұрын
A very good video. Great explanation. Thanks! 😊
@JuanPablo-gr5pp 14 күн бұрын
What is that tub you placed in order for the water to go directly to the drain?
@peterlona7835 14 күн бұрын
Is that polyurethane or epoxy?
@peterlona7835 14 күн бұрын
Hey boss, i see you have the proper PPE but no gloves
@SunflowerSoul11572 15 күн бұрын
I live in an apartment complex, and I have to have mine redone next weekend.So i'm hoping that it's something simple like this. They said I'll have to be gone for at least 24 hours.
@Zman1583 15 күн бұрын
Where can you get the mesh. Home Depot sells everything in n?
@BillNevitt-i7n 16 күн бұрын
how long does it take for bondo to dry?
@kimberlycorley4164 16 күн бұрын
I see you gotta completely allow it to dry, I use 80 grit but I see I need a more stronger grit. I'll try what I have though. I have 180 and 200 grit hope it works.
@MultiLisa10 16 күн бұрын
Came out beautiful but title is misleading and after reading the comments I'll look for your actual reglazing step
@DPTubs 16 күн бұрын
Just browse through the channel and you’ll see plenty of videos step-by-step
@nileshpatel7214 17 күн бұрын
Don't waste your money for hawks laboratories.
@gloriaarias3846 17 күн бұрын
Puedes venir a reparar mi tina
@davidberia7877 18 күн бұрын
What’s the brand of the products being applied to the tube
@DPTubs 18 күн бұрын
@@davidberia7877 Resurface Solutions
@tcc2021 19 күн бұрын
Curious why would you not pull out all the old caulk and just put new after the glazing?
@minaking9400 20 күн бұрын
Awesome job
@vishalpahwa 20 күн бұрын
Do you give apprenticeship?
@DPTubs 19 күн бұрын
I offer Zoom coaching classes and discussions / Q&A’s
@janet20257 20 күн бұрын
Don't you reglaze the outside of the tub too? That is what I need.
@DPTubs 16 күн бұрын
The full tub is reglazed
@TitanSpeeflo 20 күн бұрын
Awesome to see 😃
@macemace5196 20 күн бұрын
Thank you, looks nice. When will you do a video using Ekopel? Great non toxic,WB product. My fav.
@DPTubs 19 күн бұрын
I would only try it if it was sent to me!! I’m not to interested in any coating that isn’t applied through a spray gun / system HVLP!
@macemace5196 19 күн бұрын
They do have spray version specifically for HVLP .Ask them.@DPTubs
@marioflores9334 20 күн бұрын
How much are this HVLP sprayers? Question is the resurfacing solution paint product very smelly? Like the Krylon epoxy paint? Just curious because the Krylon product itself has a very strong fumes smell.
@DPTubs 20 күн бұрын
Every product has its own distinct smell. I love Resurface Solutions as it has a much "drier" non sticky overspray in comparison to others.
@newlooktubrestoration4431 20 күн бұрын
Is this a new system they came out with?
@DPTubs 20 күн бұрын
Yes it's their newest and I highly recommend it for both beginners and professionals.
@ihcubed 20 күн бұрын
Why didn't you usE gel coat?
@fredve3984 22 күн бұрын
Make sure to constantly move around items in front of the camera so the viewers can't see a name or a brand of the item you're holding. Just keep flipping it over and around and yammer on. Perfect!
@DPTubs 21 күн бұрын
ok will do!
@c88485 23 күн бұрын
Do you have any suggestions for people who live in an apartment where they keep reglazing the neighbor's unit but don't seem to ventilate it. I just got an industrial fan to use in my apartment to try to get the fumes out but it is not working too well. I found your video just now but don't have a way to get your extractor in time. Any other suggestions?
@erikmaurer 24 күн бұрын
When spraying in the film you went right to left Horizontally. Do you also go Vertically For a good layer or is that too much ?
@DPTubs 20 күн бұрын
Occasionally I will cross spray but tend to do it more when I am spraying tile in order to properly and effectively pat the grout lines.
@erikmaurer 20 күн бұрын
Thanks for your input your videos are great @@DPTubs
@lou704 24 күн бұрын
Is that epoxy paint?
@DPTubs 16 күн бұрын
No, it’s not an epoxy as epoxy tend to discolor and yellow much easier. This is an acrylic aliphatic poly glass urethane resin.
@brainybananaproduction 26 күн бұрын
how long did the whole process take in total?
@jrrigs5337 26 күн бұрын
Hey there and Thanks for this video. I understand that you recommend waiting 45 min to and hour after the resin but how long do you wait after the Bondo and Putty application?
@DPTubs 16 күн бұрын
Generally, the Bondo putty will dry within 15 minutes, depending on the air temperature and humidity
@louseal7574 26 күн бұрын
You use rustolium white appliance paint to spray your tubs with?
@DPTubs 16 күн бұрын
No, for full that’s every (Reglazing). I use a product from a company called resurface solutions.
@donotchangepassword9695 28 күн бұрын
Did it peel off yet?