How does one get to go to ignite? Is there tickets to buy or is it invite only? I’m new to Thunder Laser USA but have been working with lasers for about 3years so still kind of new to the laser world as well and would love to learn from and with others in the industry.

Any settings you can share?

What laser do you use to cut white mother of pearl? Is it possible to cut white mother of pearl?

no, that hinges are metal :)

Enjoyed the comparison. Thanks for doing this type of video! Would love to see additional “deeper dive” videos. A little constructive criticism is you don’t mine. “Okay guys” 20 times as opposed to 96 times. 😊

here Commentors thunder employes😂

I can confirm…Brian and Chris are top notch!

Rating: Extremely satisfied with my Thunder Laser Investments. Precise, high performing laser. 15 months in now and still 100% satisfied with my choice. Great value for the money. So thankful I chose not to go with a lower quality option. So happy that I just bought another Thunder Laser product. Cheers!

Such a great video! Good job Thunder USA!!!

Love all 3 of my Thunder lasers. Thunder has excellent customer support.

Looking at secondary machines (higher end) Thunder One laser Aeon I own an Omtech 80W C02 (2yrs) Will more than likely fly to FL to test these out 1st, before I purchase. Great video on difference between the two 💪🏽

Good company.

I have a Nova 51/130 ( 1 month old) I can agree with everything you talked about, my only issue is the camera that's offered is not up to the quality of the rest of the machine. It need an optical zoom that crystal clear not a zoom through software that pixilates when zoomed.

this garbage. Why wouldnt you have it on the lightburn screen. just sending to the laser ? how big it is ?

good job great tutorial very easy, to follow

Mine is slow as shit

How long does it take to engrave one side of the coin that deep?

100% - Best support. Period.

I just bought my 1st ever Thunder laser. What is the maximum stock air assist pressure on the Bolt Plus? I can’t adjust the high pressure screw over 1.9 psi. I keep getting error message saying my Bolt Plus is below .3 psi and it won’t start a new job. There isn’t any photos or instructions anywhere how to operate the 3 gray buttons on the little LED screen above the High and Low PSI adjustment screws. Frustrating that the stock air pressure is so poor… what am I doing wrong? I know how to switch air on and off in settings for cuts and engravings, but it seems there is very little air when needed.

can you share where and what brand this apparatus is that is rotating your mug please???

The Nova Plus has definitely gotten my attention! I’m waiting for some more content to be posted before I make the purchase.

Thanks folks - sorry I missed it - verry excited about the new Nova PLUS!

where do i find a video with the details

i have reseted my engraver and now my axes are messed up, when i go up it goes down when i go left it goes right. my 0 is at the bottom right but originally it was top left (where the capters are). i have reseted my engraver because it don't remember where zero is so it hits the metal at the top left sometimes. Everything is messed up now :( (myengraver size is 70cm x 50cm) If someone can help :(

will the bolt do the same?

Hello question does the Kerf change with more or less power? Also what is the best way to measure kerf i have seen people cut a 1x1 square and use digital calipers to see the true cut do you find this accurate and the best way? Thanks

Hello! On my machine, if I select on or off it makes no difference, the pump sends the same amount of air.... what could be the cause? I have the biggest model of aquarium pump for air assist and I think it has just one speed... On the solenoid, if I try to reduce air debit by the screw on the top it gives lower debit on both on or off. I think I am slowly going insane with this. Thank you!

You are the owner and president?? Well done Clay, you look like a bloke you'd love to have as a neighbour and have a beer with. Not the president of Thunder Lasers.

Do these values change when you install a new tube?

Hi How much this Where i can get this. I stay in UAE (Dubai) Let me know. Thank you

since its lack of showing alingment and how to turn laser dot to position i call it shit video.

Looks good, Clay -- another product idea for me to play with for my store. Thanks, and Merry Christmas to you and the Thunder folks.

Hello Clay, I hope you are well, and thank you for all these videos, I have been learning although I don't have my laser yet, I am a few days away from buying it, I would like to know why you don't give any gifts when purchasing your machines, I am buying the Nova63 130w with almost all its accessories, except the rotor. Would you be able to give it as a gift? It would be great to receive a gift buying your largest and most powerful machine, I hope it is the first of many more. I was going to buy with Aeon laser but I'm not going to wait 3 to 6 months for them to send it, they gave me a laser Gabo for free, when will I buy the laser, after the Trustpilot reviews, I definitely decided to go on your brand

Hello Clay, I hope you are well, and thank you for all these videos, I have been learning although I don't have my laser yet, I am a few days away from buying it, I would like to know why you don't give any gifts when purchasing your machines, I am buying the Nova63 130w with almost all its accessories, except the rotor. Would you be able to give it as a gift? It would be great to receive a gift buying your largest and most powerful machine, I hope it is the first of many more. I was going to buy with Aeon laser but I'm not going to wait 3 to 6 months for them to send it, they gave me a laser Gabo for free, when will I buy the laser, after the Trustpilot reviews, I definitely decided to go on your brand

Here is the link to Cuttle: cuttle.xyz/thunder

What is the black spray on metal?

I own an Omtech 80w CO2 ($$ in 2022) now I’m using it more frequently in 24’ for my side biz. I am definitely noticing that when it comes to cutting full 1/4 in sheets of MDF (ornaments various images) it doesn’t seem to cut fully through for all of them. I spend too much time recalibrating every time I do the same type of job. Looking at thunder and aeon, for second machine in shop

love it, could you share the settings for the nova 63 130w please?

Love it, could you share the settings for the Nova 63 130w, please?

So glad you all talked about the precision of engraving on the 130W. I am definitely one of those people that have been debating that before I make my purchase! Thanks Sallie!

I find LA Awesome leaves quite a lot of streaks (you can even see it in the video). Any suggestions for that?

Can these lasers cut wood or is it more for marking?

I have watched this video five times and have followed your instructions EXACTLY. I have two baseballs I'm trying to do this with. It will either completely erase the outline of one baseball or the other. It WILL NOT do what you're able to do and hide just the overlapping part. I've been working on this for over an hour. I'm extremely frustrated.

What machine is this Nova 63? 100w or 130w?

My wife and I truly enjoy watching Sallie’s channel. She’s extremely informative. We’re actively shopping for a new laser as we speak. We’re upgrading from a diode laser and planning on starting our business. Thunder is at the top of our list!

That’s so true… buy your second laser first. Being new to lasers I’m almost got a CO2 but instead I goy a diode. My next one will be a Thunder laser for sure.

Love watching your channel Sallie

Would you be kind enough to stop recording your videos in HDR mode? Its really annoying to watch on my Samsung phones as there's no way to disable this forced feature.

Does anyone on your team speak Spanish? I want to buy one of your machines, I was about to buy with Aeon Laser but after seeing the reviews I want to know more about your laser machines, it would be great if I could talk to someone in Spanish, is there someone who can help me?