2 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@tylermolenda6146 8 сағат бұрын
Thank you for the tutorial on this. How do they look today? any condensation or UV damage?
@P3Gauges 7 сағат бұрын
@@tylermolenda6146 ask our buddy Scottie - @scooooottie on Instagram. I sold him the car last year. When I sold it they still looked great and even if they did start to fade I’d still say it’s worth it over spending $1500 with how bad mine were
@JdaquesWallace Күн бұрын
Does it read e85 content
@P3Gauges Күн бұрын
Yes, with our ESVA you can read E content - www.p3cars.com/gauge-accessories/add-on-sensors/p3-ethanol-sensor-voltage-adaptor/
@JdaquesWallace Күн бұрын
Does it only read boost or can it read ethanol content
@P3Gauges Күн бұрын
@@JdaquesWallace it can read a bunch of parameters including boost and ethanol. Check out the details on our product page - www.p3cars.com/charger/
@mr.nicholasball9664 4 күн бұрын
Loved the video. Considering purchasing. I did notice that when you first plugged in the display to the OBD2 Port that the display was slowly running lights. The jeep was not on at that point. Is there a battery in the converter box or will this simply draw power while the key is in the off position?
@P3Gauges 4 күн бұрын
@@mr.nicholasball9664 thank you. Since your OBD2 port has constant power we use logic for the gauge to turn on and off with the engine. The gauge has a sleep routine where it only checks for a voltage surge every few seconds. When it does see one, it then looks for RPM. This is just the default setting so anyone can plug into their OBD2 port and go. You can also wire to a switched power and disable that on/off logic. Feel free to email with any further questions and we can answer anything else - [email protected]
@warmeds2009 5 күн бұрын
Fantastic video....
@P3Gauges 4 күн бұрын
@@warmeds2009 Thank you💪🏼
@jeezusgarcia4255 5 күн бұрын
I got an Indium grey 19' Mk7.5R last September i actually got the heliograms too but in silver. Damn do they look good. It was a single owner with 24k miles. Have only a cts resonator delete and IE intake.
@P3Gauges 5 күн бұрын
@@jeezusgarcia4255 that’s legit. Send some pics to our IG - @p3gauges👍🏼👍🏼
@jeezusgarcia4255 5 күн бұрын
@@P3Gauges for sure! 👍
@debbiethomas9883 6 күн бұрын
Great video
@P3Gauges 5 күн бұрын
Thanks Mom. Look like anyone in particular? lol
@SavageOutlaw17 8 күн бұрын
How much of the airflow from the vent is cut off with this display installed? I really like the way this looks, but I don't want decreased airflow through the vent.
@P3Gauges 8 күн бұрын
@@SavageOutlaw17 you probably won’t feel a big difference. I actually made a video on that topic, you can watch it here - How much do they ACTUALLY block? | P3 Gauges kzbin.info/www/bejne/l4LGhGCLi7WWqKc
@hhhhxxx7583 13 күн бұрын
I have install this plumb back and open pod intake but I didn’t get this sound.why?😢is it need to modified other for this sound?
@P3Gauges 13 күн бұрын
Hey, please email us - [email protected] and we'll assist you there. Thanks! - Jake
@JohnnyDifrancesco-kb2lm 14 күн бұрын
Hello, I have a 2021 bmw 240i. My question is can I purchase this with the ethanol sensor and avoid having to get the boot mod flex fuel kit? I’m assuming if you pay the extra $100 for the sensor if removed the need for flex fuel kit? Please let me know and I will pull the trigger on this. Thanks!
@P3Gauges 13 күн бұрын
In order to read ethanol you will need 1- our gauge, 2- an ethanol sensor, 3- our ESVA. <- That setup will get ethanol content to your eyes but not your ECU. So if you're going to be running a blend tune and just need to see the ethanol content you can do that with our gauge.
@JdaquesWallace 14 күн бұрын
Always been looking for one of these for my car!! I will definitely put my homies on
@ka_razygaming1183 14 күн бұрын
I keep getting “open air sensor cap tap.1 on my p3. Can’t find anything in a guide. What does this mean. Please help.
@P3Gauges 14 күн бұрын
@@ka_razygaming1183 that’s the analog boost sensor calibration. Watch our v3 how to video and you’ll see that covered in the sensor calibration section - kzbin.info/www/bejne/oJiqmntvZ5Wsj9Usi=5pTCMYaO543RfCM3
@justinryu393 19 күн бұрын
Does this have a downpipe? Is it just only the catback they changed?
@P3Gauges 19 күн бұрын
@@justinryu393 it has an APR downpipe on it
@justinmcmahan5285 21 күн бұрын
I need to fly down to hang out, also you know us Tennesseeans are proud of our Volunteers, GO BIG ORANGE!!!!
@ArtfulGent 24 күн бұрын
Awesome stuff my guy!
@P3Gauges 23 күн бұрын
Thanks dude, show us a 0-60 in the M4😎
@TheMrstig92 24 күн бұрын
Great work as always, Excited to see what else you do
@P3Gauges 23 күн бұрын
Thanks man, looking forward to your upcoming pinewood race content😎
@d_rock_t 24 күн бұрын
Still looks like its spinning the rear tires, no?
@P3Gauges 23 күн бұрын
Yeah, that was on my slick concrete floor. I’m guessing the slip is either right on the edge friction wise and it’s able to spin on the floor OR it slips for a split second and then grabs. I’m gonna have to dig into it further to see what the issue is
@augustbair5188 24 күн бұрын
Enjoyed the vid man. You never said what the secret part is tho lmao
@P3Gauges 23 күн бұрын
I CAN’T BELIEVE I FORGOT THOSE CLIPS!!!🤦🏻 (I finished this in the wee hours of the morning…) It’s IE’s new polymer intake lid and it JUST went live. Use the link in the description to see it, I linked all the parts down there. Thanks for letting me know, I’m an idiot!😂
@augustbair5188 21 күн бұрын
@@P3Gauges have a very similar car with very similar parts, it’s just the best daily of all time no question
@P3Gauges 20 күн бұрын
@@augustbair5188 it's honestly really good at everything. The only thing I miss is RWD and intimidating V8 noises but you can't have it all!
@Pyrotech1620 24 күн бұрын
I did the 2x4 method when I lowered the wifes GTI and was so quick and easy! Great video and nice to see all those IE parts!
@P3Gauges 23 күн бұрын
It works really well if you do it right. IE is legit, love everything they’ve sent so far
@XxSmokeeyxX 24 күн бұрын
check the transfer case now i guess
@P3Gauges 24 күн бұрын
Probably where I'm headed next. Thankfully the car runs and drives great other than launches (and even then it's not some catastrophic failure) You'll see whatever I find eventually, haha
@XxSmokeeyxX 24 күн бұрын
@@P3Gauges I think you can just replace the DSG transfer case alone too shouldn't be too bad but might have to drop front subframe 😬
@dawsonlockwood2278 24 күн бұрын
Great stuff Jake! Keep up the amazing content
@P3Gauges 24 күн бұрын
Thanks Dawson, hopefully this helps a little with replacing your rear diff. Message me if you have any questions or need any help👍🏼
@jeremymitchell8470 26 күн бұрын
Have a configuration video to show boost? I just ordered my P3 and I’ve seen several other Mk8 owners that have had issues with their P3 displaying boost out of the box.
@P3Gauges 26 күн бұрын
Yes, we have a full how-to config video broken down into sections. Here's the boost setting section - kzbin.info/www/bejne/oJiqmntvZ5Wsj9U You can find the boost settings for your car on our install page - p3gauges.com/v3-install If you're reading boost through the OBD2 port it should pull boost right out of the box. If not, you may need to adjust your boost setting to pull boost from a different PID (which you'll see how to do in the links above) If you have any other questions please email [email protected], thanks. -Jake
@jeremymitchell8470 26 күн бұрын
@@P3Gauges exactly what I was looking for. Thanks!
@yishunGuan 27 күн бұрын
Why can I only display the voltage, and the rest can‘t be modified?
@P3Gauges 26 күн бұрын
It sounds like you may have deleted your other readouts by accident. You can find instructions on how to remove and restore readouts on our install page - p3gauges.com/v3-install Shoot us an email - [email protected] and we'll walk through your settings with you and get you taken care of. -Jake
@MisaelContreras-mikka- Ай бұрын
Thanks, this video help me so much 👏🏻👏🏻👌🏻👌🏻
@P3Gauges Ай бұрын
Really glad to hear it, thank you! We can all help one another out👍🏼
@iSmokey-fq1kb Ай бұрын
B9 has coolant temp guage on the left bottom side but my 2021 s4 B9.5 doesn't have coolant temp guage and will only throw a engine temp warning if it gets too hot.. If I install this can it read my coolant temp without any additional sensors installed? Ty
@P3Gauges Ай бұрын
Absolutely. Not only can you see raw coolant temp but you also have a peak-recall to see the highest coolant temp since starting your engine on that key cycle. That all comes with the base gauge, just plugging into the OBD2 port. (Nothing extra needed)👍🏼
@ejicon3099 Ай бұрын
Thanks for the clear and straight to the point configuration guide. @11:48 Once d.ON.P is selected, how do I manually dim the gauge brightness without having the green wire connected to my cars dimmer output?
@P3Gauges Ай бұрын
Thanks for your comment. When you’re not set to auto dimming (so “d.On.P” or “d.On”) you just hold the right button down in gauge mode until the display dims. Do the same until it returns to bright to change back to bright mode.
@ejicon3099 Ай бұрын
@@P3Gauges Beautiful. Thanks for the quick response back and for producing such a great product. Appreciate it.
@mstar501 Ай бұрын
Put some flashing high brightness LEDs in those fake exhaust tips... maybe even synchronized with your shifts.
@mstar501 Ай бұрын
I like this!😂 I see some blue color difference on the motorized Golf left door. Maybe swap doors with the trailer Golf?
@P3Gauges Ай бұрын
Haha you're telling me! VW recently did a rust warranty repair on the car but did not do any blending when they painted so it now looks like a Rising Blue Harlequin... We discussed swapping doors but one is dented, haha.
@577buttfan Ай бұрын
Plug and play
@Yonkers_DE4 Ай бұрын
Any word on one of these being released for the 2023+ Acura Integra or if this one fits?
@P3Gauges Ай бұрын
Our software works in them but we don't yet have enough demand to design a display specifically for the Integra. If enough demand arises for them we'd be happy to develop an Integra display. If you have further questions, please email [email protected], thanks.
@Yonkers_DE4 Ай бұрын
@@P3Gauges what would you consider enough demand? I can start a post on the forum to see what the fellow members are thinking.
@P3Gauges Ай бұрын
@@Yonkers_DE4 I replied to your email, thanks!
@oem_slim Ай бұрын
VW guy here through and through. It's pretty nice to see these cars holding value. Although the 7.5's tend to sell for more, to put things into perspective, I purchased my 2015 7r back in 2021 w/ 46K miles for $24K. This to was my 1st "automatic". I've been running IE stage 1 FBO excluding a downpipe for about 2 years, and E85 for the last 6 months. Downpipe and full stage 2 are pending install. The car itself has been phenomenal and now boast 97K miles. I personally don't care if the car is the fastest, but the performance, reliability and fun factor is unmatched. Great buy!
@P3Gauges Ай бұрын
Sounds like we would get along great! I've got a diff here ready to go in the car along with all the stage 2 parts. It will be getting TrueFlex after that. I'm really impressed with the IE parts on several of our cars and the performance and drivability is awesome. Have you ever been to wookies in the woods?
@oem_slim Ай бұрын
@@P3Gauges LOL probably so and I agree, IE parts and tunes have served me very well, so I trust them big time. Along with the dp, I'll be throwing on some ecs tuning 2 pc front rotors and ebc pads to hopefully help slow this mini beast down. I missed WITW due to work but hope to make a shows.
@Fredzed721 Ай бұрын
Can you hard wire this instead of the obd port? I run a hptuners mpiv3 on my obd port when I race. If this is plugged in can’t use the mpiv3
@P3Gauges Ай бұрын
Yes, you can hardwire to the network to leave the OBD2 port open. You may find that 2 devices cannot communicate on the network at the same time.
@BrownieMilk 2 ай бұрын
So i just got one of these and the gauge just flashes those initial white dots forever... No reading from the car. If I push the right button, it'll show me battery volts for a bit, then go back to blank with flashing dots.
@P3Gauges 2 ай бұрын
It sounds like your config settings may be incorrect. Please email [email protected] and we'll get you taken care of right away. -Jake
@BrownieMilk 2 ай бұрын
@@P3Gauges Just sent an email!
@034motorsport 2 ай бұрын
Thanks for having us involved! This rig is just 🤌🤌🤌
@P3Gauges 2 ай бұрын
Thank YOU guys for spicing things up! The wheels are meant to be 😮💨
@jaroslawmnich4837 2 ай бұрын
He's struggling to put the box in and two idiots are standing and looking at him instead of helping him
@P3Gauges 2 ай бұрын
The real idiot is the guy who said he wanted redemption in doing it himself (me - Jake) LOL I failed last time I tried - kzbin.info/www/bejne/i6DRmqZ6hLShms0
@BotMechanic 2 ай бұрын
So is this not the analog version on the website now?
@P3Gauges 2 ай бұрын
No, they are 2 different products. This V2 gauge is technically discontinued but I can set you up if you email me - [email protected]
@CJ.Bartley 2 ай бұрын
I need me a non resonated MillPipe!😂
@P3Gauges 2 ай бұрын
Say that 4 times fast
@ArtfulGent 2 ай бұрын
It's even cooler in person
@P3Gauges 2 ай бұрын
So bummed I couldn't make it to Helen, looks like you guys had a great time.
@budgetplan8730 2 ай бұрын
Wicked cool 😎
@P3Gauges 2 ай бұрын
Think of how many deliveries we could accept in that TrailR 😂
@budgetplan8730 2 ай бұрын
@@P3Gauges 🤣 All of mine hopefully!
@P3Gauges 2 ай бұрын
@@budgetplan8730 of course!
@scottanderson6969 2 ай бұрын
Where’s the comparison after all of the aftermarket parts!!
@P3Gauges 2 ай бұрын
We ran out of time, we're gonna make a recap video and go over all those.
@collinwiedel 2 ай бұрын
Got me missing the R more than ever 😞
@P3Gauges 2 ай бұрын
You need to go to a show with us👍🏼
@Pyrotech1620 2 ай бұрын
The Risky R is a beast now!!
@P3Gauges 2 ай бұрын
Yes it is, it’s so good
@justinmcmahan5285 2 ай бұрын
I learned how to drive on a 1966 F100 pickup, no power brakes, no power steering, it was a manual three on the tree, took my driving test with it back in 1995
@P3Gauges 2 ай бұрын
That's awesome and here you are all this time later still rocking the Fords
@youtubejunkie8053 2 ай бұрын
Tell me you don’t own a VW without telling me you don’t own a VW 😂😂 8:00
@P3Gauges 2 ай бұрын
HAHAHAHA the best part about that is that his car is the one pulling the trailer😂😂😂 That fuel door is aftermarket and tucks into the body a little more than a factory one. I couldn’t cut his struggle out when editing 😂😂
@logmonkeyr32vr7 2 ай бұрын
Where to find these bags? Need them on a jsw.
@P3Gauges 2 ай бұрын
Product link is in the description
@timabbott4420 2 ай бұрын
😅 Promo_SM
@Henni112 2 ай бұрын
Yall missed out on the BnG. Next year come on by.
@whosleeps 2 ай бұрын
Kollin with that clutch delete mod.
@willjohnson226 2 ай бұрын
I need Jake to come install a garage banner at my house, should be an option on the website like Paul's install option from ShopDAP
@heyyitsandy 2 ай бұрын
I was the guy behind you on the parade lap! Good stuff man, SUBCRIBED