Did replacing spark plugs and coil packs fix the issue?
@GTJesse4 күн бұрын
Always a pleasure broskie
@TRONMAGNUM20994 күн бұрын
TY! Worked great for me. My headliner was driving me nuts. I saw another video that recommended staples but they didn't look good.
@mattborman57804 күн бұрын
Lotta wisdom in tip 5. Thanks for the content
@paidhowboutu15 күн бұрын
Just saw that white Subaru at HEB this morning.
@GTJesse4 күн бұрын
Hah! That was my first time going to that HEB. Produce quality is off the chart
@paidhowboutu14 күн бұрын
@@GTJesse there was a guy in a red Subaru taking pics lol.
@GTJesse3 күн бұрын
@@paidhowboutu1 were you the red subie??
@paidhowboutu13 күн бұрын
@@GTJesse 😂 naw I was in a white GMC.
@GTJesse3 күн бұрын
@@paidhowboutu1 ah I thought I found my parking buddy 😂 #missedconnections
@muhannedhadi52610 күн бұрын
I have same code with BMW 320i and my car doesn’t start
@bonperal10 күн бұрын
The old man approves. How's the ride?
@JoelsDriveway10 күн бұрын
@bonperal Very nice. Smooth, firm, responsive. Worth every penny 👍
@wheelsone5511 күн бұрын
You can just pry it open when the vehicle is unlocked. The key will just fit between the body & the fuel door. Twist the key in the gap & the door will pop open. To not scratch the paint simply wrap a rag or something similar around the key. At some point you’ll want to replace the actuator switch, but you shouldn’t find yourself stranded at a gas station if you do this. ❤
@daflyinhawaiian212 күн бұрын
No need for a pick on the fuel door. Take off the gas cap and just start pulling out from the screw end, aft and out. Easy Peasy!
@thebigbosss100013 күн бұрын
Where did you purchased the water pump ?
@JoelsDriveway13 күн бұрын
@@thebigbosss1000 ecstuning.com
@thebigbosss100013 күн бұрын
@@JoelsDriveway you just got the regular one right with out the tools ? I’m in search of one my VW CC is leaking coolant I’m afraid my water pump is out 😞
@JoelsDriveway13 күн бұрын
@thebigbosss1000 got the kit I believe. It's been awhile. Just make sure it's for your specific engine. When the pump fails, it leaks coolant, a LOT. Good luck on the repair! Reach out if you need guidance on my Instagram.
@thebigbosss100013 күн бұрын
@@JoelsDriveway yeah I already searched it up and it’s perfect for for my car , and yes thank for this video it should be super helpful 👍🏽
@marior.994814 күн бұрын
Looks good
@JoelsDriveway14 күн бұрын
@@marior.9948 Thanks!
@yendys6914 күн бұрын
Great video bro. What’s your wheel offset setup?
@JoelsDriveway14 күн бұрын
@@yendys69 18"x 8.5" all around.
@yendys6914 күн бұрын
@@JoelsDriveway what offset?
@JoelsDriveway14 күн бұрын
+35
@yendys6912 күн бұрын
The sport cup kit is with billstein shocks?
@speedslw18 күн бұрын
thanks bro
@glencuda18 күн бұрын
My headlight is different from this. What year is yours?
@Ghost-eg7nv19 күн бұрын
My GTI 2009 comes on with EPC light when I switch ignition off give it a minute turn it back on it’s gone what do you think this is it’s stage 2 remap and few bits done
@JoelsDriveway19 күн бұрын
@@Ghost-eg7nv you scan for codes? Is it running rough?
@geanettewilson386120 күн бұрын
Great Demo
@bobbowlinex931921 күн бұрын
2017 Jetta 1.4. replace coil pack fuel injectors. I've been having random misfire. Epc light comes on. Shut the engine off. Restart it EPC lights gone
@KingTechHD22 күн бұрын
Great job on your first time. I’m learning now
@Brock.gti.mk622 күн бұрын
It’s most definitely not imitation sound it’s actual blow off sound lol
@odaihani874622 күн бұрын
Today i bought tiguan 2014 . I changed oil and filter then I was very happy while driving on the highway and suddenly “ oil pressure warning 😂😂” i checked the engine oil it was ok 🫤 now i realised that the problem is the sensor😅
@bonperal23 күн бұрын
Very cool. I think I'd prefer the vent mount, but that's just me. Are you running a Borla exhaust? Looking forward to the suspension upgrade.
@JoelsDriveway22 күн бұрын
@bonperal Yes, Borla cat back exhaust. New suspension is definitely next.
@kyelharrison85923 күн бұрын
Got this light last night, i checked my oil levels and they are where they should be. Just got an oil change 2 days ago and then thus warning came up, never seen it before. Has anyone figured out what i might be running into?
@thomasgranville360415 күн бұрын
Same here I just bought this car and the owner changed the oil recently. It looked full and clean. Once I got this issue the oil was still where its at. Car runs fine but just a little laggy in regular drive when taking off from a stop. I'm going to start with the sensor!
@efrainvalencia227412 күн бұрын
Just started getting this light on & off on my mk6.5 GLI last week, i replaced my oil sensors couple days ago and this morning light turned on again. Gonna replace my oil filter (even though its fairly new) and if that doesnt work next will be oil pump. Car runs perfectly fine though no problems so idk
@officialshotbycamen24 күн бұрын
got my car in the shop rn. did an oil pressure test and everything checks out, had the oil sensor replaced and it’s still saying engine oil pressure shut car off immediately…over here spending every dollar i have to try and solve this problem and it seems just unsolvable so wondering if anyone has got any clue as to what might be happening?
@kyelharrison85924 күн бұрын
Let me know what you find as the issue, I got an oil change yesterday and then that light came on for me today out of nowhere. Reading through the comments I still don't see a clear answer as to what is wrong. Is it possibly something the place that changed my oil did?
@datheoryofКүн бұрын
Same here. We all are having the same issue & it's freaky. I think this means VW owes us a free replacement because that's a recall issue
@RiniG35x26 күн бұрын
Saw this issue for the first time today on my Mk6 Gti that’s at 87k miles. Recently got an oil change and it’s not leaking. I checked my dip stick and she got nuff oil. Will change out the oil pressure sensor once it gets here.
@cjjaxxon26 күн бұрын
I have a 2013 Dodge Ram 1500 5.7 Hemi with a misfire on cylinder 5. I see many with that problem.
@freddyarmenta933826 күн бұрын
Anyone else having this problem? Mines a 2016. Its like sputtering, making almost like a grinding noise. . .or not grinding but you can hear something spinning when you hit the gas. It has this same sign but my oil levels are full and i did a full service and changed my spark plugs and everything. Could it be the oil pump?
@harleymcdowell9817Ай бұрын
That spring cup adjuster should be on top
@bonperalАй бұрын
This old man loves it!
@vwpassat444Ай бұрын
dude this video was so helpful, going to try this on my passat, trying to just wrap the roof black
@coleeads4955Ай бұрын
What is the tool called that you used in the cideo
@jamesandrew364Ай бұрын
I have a 2016 Jetta. No issues with this yet, but don’t wanna get stuck at gas station ever with door that will not open. How about just disconnecting the actuator when in the “open” position and leaving it that way for good? Would avoid ever getting stuck, which is greater risk than someone stealing gas from my tank or similar. Thoughts?
@ErlankBustaАй бұрын
I'm driving polo vivo 2018 model clp engine while I'm driving the epc light pop up with the car slippering, what could be the cause?
@jahblitz9Ай бұрын
Dirty Throttle body
@MarkoG214Ай бұрын
MK6 gen is slept on.
@hokiebama1187Ай бұрын
Had to do this again... this video is the best
@JoelsDrivewayАй бұрын
Thank you so much!!!
@nikkibowles1754Ай бұрын
what is your thought if the EPC code is on as well as the traction control light
@nathanieldelafuente6301Ай бұрын
Nah I never seen suspension vids u lie . And u got that stanky leg 😅😂
@JoelsDrivewayАй бұрын
@@nathanieldelafuente6301 Lmao
@coyotesnperАй бұрын
Anyone else have issues with the headlights just dimming for a second when you hit the breaks or when you adjust the blower fan. Put a new alternator in and battery. Still dims.
@sarab9474Ай бұрын
🩵💫💯Thank you
@mattcox5496Ай бұрын
Very helpful thanks man, I'm ordering the part and hopefully it fixes it
@Javier-ue5ntАй бұрын
i would recommend doing half wrap black and white, i think it would look nicer, but this one goes hard 🔥🔥🔥
@alonsogarcia949Ай бұрын
en una palabra defino al Jetta 2013 2.5 SE como un maldito carro que jode por todo y que fastidia a los mecanicos y no se quieren meter con esta porqueria de VW , nunca mas quiero saber de carros Europeos .
@russellcrowe187Ай бұрын
Could a recall on the fule system i don't it in front of me happend on my way back to worj
@tracey-anncannon2233Ай бұрын
My EPC light came on yesterday .I took the car to the garage today and they told me one cylinder isn’t firing .I feel better knowing what the problem is .Thanks for your video ,it is very helpful !
@donwelke940Ай бұрын
Just did mine, what a pain! I hit my head three times on that bracket. Hey VW, if your gonna make a Mikey Mouse little core to be replaced every 60k, put it somewhere I don't need to ball up like a contortionist to change the thing, please. I'm too old.
@PFLDIEGOАй бұрын
Thanks! Definitely helped my install.
@splashnavy619Ай бұрын
Thanks for the video. Great information, well done.
@kenleigh982 ай бұрын
My EPC light has consistently been coming on over the last two months. Along with the engine light. We’ve had the battery replaced, wheel speed sensor, and now replaced the camshaft position sensor. Still having the same “limp mode” issue 😢 over 1000$ later..
@abaki350211 күн бұрын
Did you fix it?
@kenleigh9811 күн бұрын
@@abaki3502 well after 6 visits at the mechanic/dealer, got the timing belt replaced and it seems to be doing good. Almost 2 weeks now with no issues!
@user-gl2eq2ly4g2 ай бұрын
Thanks Love the car man
@CSTLLNS2 ай бұрын
For you guys doing this for the first time turn the steering wheel all the way to get clearance and lock it in place with the seatbelt. No need to remove the axle you can use an open end wrench and that pickle fork to get it out. Saves some time and some money.
@TheOnlyInformant17 күн бұрын
How do you tighten the ball joint then?
@CSTLLNS17 күн бұрын
@@TheOnlyInformantan open end wrench. If you have experience working on cars you have a good idea of proper torque for this nut.
@TheOnlyInformant17 күн бұрын
@@CSTLLNS most ball joints I've seen have an allen key slot in the thread portion. Which if you were to tighten it spec would require you to use it as spinning any ball joint or shock would likely damage it.
@CSTLLNS17 күн бұрын
@@TheOnlyInformant most ball joints when new don’t spin upon install. Also if they do spin you just put pressure against the knuckle and it doesn’t spin. Like I said if you have experience it’s a piece of cake.
@CSTLLNS17 күн бұрын
@@TheOnlyInformant if you have a lower ball joint, upper ball joint, outer tie rod ball joint, sway bar link ball joint the key is put pressure on the ball joint and whatever you’re fastening to and it will not spin.