Festool

Пікірлер

@filipevicente1769 13 күн бұрын

We need a cordless nailgun…come on Festool

@matthewwysocki5019 20 күн бұрын

Is this light available in the USA?

@LuisSanchez-wf9zw 20 күн бұрын

When will this be available in U.S.A.?

@mattgloss8580 22 күн бұрын

Please move the control for extractor speed to remote.

@mattgloss8580 22 күн бұрын

What's the weight with the battery for the 150mm?

@Beniuzzz Ай бұрын

cordless planer when? =]

@speciesofspaces Ай бұрын

Funny putting a light on a cordless sander but on so many other corded tools which could actually use lights more effectively they still don't offer any. I think only one light on the entire router lineup is offered, for example. None on the tracksaws and none for the Dominos either which are not easy under poor lighting conditions. Anyhow, I just wish over the years the upgrades and improvements would be universally shared across their tools and not piece meal etc. Half of these solutions wouldn't even require an entirely new generation tool either but like the 1010 router light they can simply be add-ons.

@manskavewoodworking8616 Ай бұрын

Would of been awesome if you could switch between cordless and corded - Besides the power source, is everything else the same vs the corded?

@jonnyking4369 Ай бұрын

I live in UK England I need this!!!! ❤

@FestoolINT Ай бұрын

Available from February :) www.festool.co.uk/@577723

@adameredics3788 Ай бұрын

This is nice, but where is the cordless planer?

@norris4087 Ай бұрын

Take my money 😂❤

@Cianan-vw1lb Ай бұрын

Already bought the old ones. Standardizing the battery is a nice improvement.

@menuiserieesperance6804 Ай бұрын

if there is a wifi vac system without any hose... ok!😅😅

@speciesofspaces Ай бұрын

I still think someone is going to figure out a new way to collect the very fine particulate material onboard to the tool.

@troyqueen9503 Ай бұрын

Thanks for listening to my suggestions.

@yoj2907 Ай бұрын

It's time to launch mains adapter like aca for standard bp 18. Wireless is good, but hybrid is better.

@bilekt3 Ай бұрын

I have same thoughts!

@speciesofspaces Ай бұрын

I have always heard the excuse that it is too bulky from a form factor perspective but I agree a hybrid would be the more pro way to go.

@dvntsmh Ай бұрын

This looks great, looking forward to the North America release!

@MattLitkeRacing Ай бұрын

Looks like it uses standard batteries. So glad I never bought the ergo battery version

@jronmanbuilds Ай бұрын

Is this a 5 mm or 3 mm stroke?

@FestoolINT Ай бұрын

3.5 mm

@okafka5446 24 күн бұрын

@@FestoolINT Looks great, what sort of run time on 4ah/5ah batteries?

@craigjoint2615 4 ай бұрын

Need a cordless ks120

@pj_co 5 ай бұрын

I second the requests for an 18V trim router

@YuriWhite2251 5 ай бұрын

Очередные никому не нужные свистелки перделки. Людям нужны например новые торцовки на 230в. Нафиг мне сдались ваша мобильность и привязка к куче аккумуляторов. Когда в любой дыре есть сетевое напряжение или генератор. Фесто! Хватит заниматься аккумуляторной идиотией!!!

@Andrius2005 4 ай бұрын

Вы пишите только свое мнение. Лично мое мнение, что аккумуляторный инструмент, это круто. Я очень рад тому, что инструмент стал акумулярным и мобильным

@timfowler4901 5 ай бұрын

I love the that Festool is making an Air scrubber. My concern is the filter replacement cost will be insane. I guess we will find out soon.

@FestoolINT 5 ай бұрын

Hello Tim, The SYS-AIR has two filters: a preliminary filter and a main filter. The preliminary filter filters the majority of the dust and thus protects the main filter. This allows the SYS-AIR to be operated more cost-effectively. The preliminary filters are offered in packs of 5 and the recommended retail price is € 77 (approx. € 15 for one preliminary filter). The prices do not include taxes and may vary depending on the country and dealer. How often a filter needs to be changed depends on the operating time of the SYS-AIR and how polluted the air to be cleaned is. We hope that we have been able to clear things up a little here. Have a nice weekend! Best regards Your Festool Social Media Team

@timfowler4901 5 ай бұрын

When is it available in the USA. Also still curious. On filter pricing in USA.

@FestoolINT 5 ай бұрын

@@timfowler4901 Unfortunately, we are not yet able to make any statements about the market launch in North America. But please follow our colleagues from Festool USA to stay up to date: kzbin.info

@nevinbens2221 4 ай бұрын

@@FestoolINT Any updates for North America yet?

@Line-vw5io 5 ай бұрын

See it coming. Sys air: €2500 pls 1 filter set: €400 pls

@FestoolINT 5 ай бұрын

The recommended retail price for the SYS-AIR is 799 € (excluding tax). This may vary depending on the country and dealer.

@damnrite811 5 ай бұрын

The only reason I passed algebra 2 was because my teacher had a heavy German accent and I thought it was so intriguing how me made anything sound interesting. W Mr. Wolff

@rolandmdill 5 ай бұрын

Still waiting for a cordless trim router... can't be that hard?!?

@zerblatt3365 5 ай бұрын

If Festool could provide a AC-DC battery dummy for my CTLC SYS I would be greatful as for now the runtime with the maximum 2x 4Ah is very limited and almost useless. The same battery dummy could also be used for the CSC SYS 50 for stationary work

@FestoolINT 5 ай бұрын

We are happy to pass on the suggestion to our developers. In principle, however, such a dummy battery is not easy to implement. Depending on the power consumption of the machine (which is quite high for dust extractors or table saws), the voltage converter will be very large and heavy.

@w2ttsy670 5 ай бұрын

Replacement for the VAC-SYS when?

@FestoolINT 5 ай бұрын

Unfortunately, there are no plans for a successor product. Demand is so low that it is not economically viable.

@sinabro2011 5 ай бұрын

Is 5A battery fit into SYSLITE KBS C?

@FestoolINT 5 ай бұрын

Yes, the 5.0 and 8.0 Ah battery also fits on the KBS C.

@theGuy6 5 ай бұрын

Everyone is Waiting for a CSC SYS 50 cable version an here we go .... come on Festool

@Torres913 3 ай бұрын

Most sites won’t let 240v on, so why would they make a corded version. Cordless is the way the world is going

@Jayda08 5 ай бұрын

According to Google; no one knows what is an "international trainer paint".

@carbb5760 5 ай бұрын

The larger light looks really good but I’ll wait to see what the battery runtime is before getting too excited

@FestoolINT 5 ай бұрын

Great to hear that you are interested in our new cordless construction light. With a 4.0 Ah battery pack it will last 2 hours at the brightest level.

@TiPi2 5 ай бұрын

Bitte endlich eine 230v Variante von der CSC SYS 50!!!!

@julianniemeyer1655 5 ай бұрын

Please stop the arty-farty filming techniques and look at the camera all the time.

@rbyt2010 5 ай бұрын

What they all said, and … that audio track🙄

@Cianan-vw1lb 5 ай бұрын

I've been looking at air cleaners. The SYS-AIR is a good addition. I have a pair of DeWalt DCL050 work lights. I put one at each end of my MFTs. It's lit like a surgery. The SYSLITE KAL C is attractive but I would need to figure a way to elevate it. There's no room for a tripod. In the US I'm also having to pay to have new tools now offered only in imperial here to be converted back to metric. My greatest concern is that they could be damaged with the extra shipping involved.

@bartholomewgreatpants3425 5 ай бұрын

I just bought a ts55 feq and they included the metric sticker that goes on the saw in the manual.

@yama-kaskad 5 ай бұрын

What prevented you from building a USB port into the flashlight to charge your phone??? You've finally reached the line of flashlights, so learn from your competitors.

@riptonedwards9175 5 ай бұрын

Perhaps you should buy their radio they have had this for 10 yrs now also their is a special phone charger that works with their batteries look if up it is avaliable in europe

@jefflemay66 5 ай бұрын

I would LOVE to see some hybrid options... like an 18v battery that has a cord, so you have the option of running a tool on battery or plugging it in. I know they have a hybrid sander, but to make this an option for the majority of the 18v tools would be amazing!!

@rorybarton2475 5 ай бұрын

Yeah, the cordless vacs chew through the batteries, I would love to have the option to run it on mains power.

@dieterbohlen8316 5 ай бұрын

I prefer Scangrip lights. High Quality. Cheaper.

@paulmaryon9088 5 ай бұрын

Come on Festool, a 240 volt variant of the cys table saw please

@lesovodi 5 ай бұрын

it looks like there is no sense to have 240v - the main idea is mobility of the saw, and if you plan to work in a shop - you could by cast iron saw for the same price or even cheaper - like Powermatic PM1000, for instance

@nathangardner772 5 ай бұрын

I have that saw. It’s pretty amazing as it is. Acme tools is now advertising the 8ah battery. 🤔

@Torres913 3 ай бұрын

Most sites won’t let 240v on, so why would they make a corded version. Cordless is the way the world is going. And the run time on the table saw is very good, even with 5 ah batteries.

@paulmaryon9088 3 ай бұрын

@@Torres913 I don't work on site, and I don't need another battery platform

@Torres913 3 ай бұрын

@@paulmaryon9088 cs50 is a good saw then

@emarr3720 5 ай бұрын

I like your products & i’m willing to pay more for quality but I still think they are overpriced. I still buy but it gives me pause. an added inducement that would make the purchases more palatable would an ac (mains for the rest of you) option on most of your cordless tools. It’s why I bought one of your cordless sanders. If you offered an ac option for your sys 50 table saw, your ctc dust extractors, your kapex (like dewalt does) i’d buy tomorrow.

@adameredics3788 5 ай бұрын

I thought they would rerease a cordless planer or router… maybe next year?

@aetorres7422 5 ай бұрын

Dewalt is going to do it first 🎉

@riptonedwards9175 5 ай бұрын

You will see both those product shortly it is festool 100 years anniversary a lot of revolutionary tools will appear shortly

@aetorres7422 5 ай бұрын

@mattryan1986 so does festool but what I am talking about is a thickness planer

@aetorres7422 5 ай бұрын

@mattryan1986 you're right I was just thinking of their planer and their routers

@speciesofspaces 5 ай бұрын

The inside filter view of the air scrubber looks complicated and I wonder how many filters one would be required to replace? Cost over the lifetime of the unit looks high. Hopefully a full breakdown on the filters and lifespan will be posted soon.

@Torres913 3 ай бұрын

Impossible to do. You could be extremely hard on filters than my workshop so how would Festool do a price on this?

@Jay_Petto 5 ай бұрын

Ist das jetzt ein verspäteter Aprilscherz 🤔?

@jameshahn3580 5 ай бұрын

……aaaaaaand still no cordless planer..? 🤷🏼‍♂️

@aetorres7422 5 ай бұрын

DeWalt going to do it first 🎉

@Dufffaaa93 5 ай бұрын

Also no systainer air compressor

@WhangaFish 4 ай бұрын

This is the tool I'm waiting for! If I had an 18v planer I could ditch the corded sys vac. It's not that big of a deal but forever hopeful we'll see an 18v planer.

@LostBoyLA 5 ай бұрын

How many years until we receive these items in North America?

@pwhsbuild 5 ай бұрын

I'm sure we only have to wait 6-8 years.😅

@singe81 5 ай бұрын

Festool have invented a new product. They call it a “torch”.

@kevinwillis6707 5 ай бұрын

only 150 euros, or 299 a pair...

@debandmike3380 11 ай бұрын

What the hell is that guy wearing shouldn't he be carrying around two large pitchers of beer. Nice work Hans and Franz.

@desmondrobinson169 9 ай бұрын

Traditional German carpenter outfit.

@debandmike3380 11 ай бұрын

in english, wow. Jose looks more like a Hans.

@tombeever6309 Жыл бұрын

Nice video but yeah, I'm from UK and live in Europe and this 625mm centers thing is the biggest ballache ever, sorry to be frank but it's so stupid. It would be better at 600mm centers and so boards coming at 2400×1200 instead of 2500×1250! 1. It's easier and faster to layout with less mistakes because the math is easier 1200 divided by 2 600. Simple! 2. It would mean that studs aligned with plasterboard sizes which is extremely useful on certain builds. As plasterboard is 1200×2400 3. It also means you can use 400mm centers for specific applications. Get with it Europe! I used to think there Germans were next level builders but the more I learn the less I like their techniques and everything is just focused on CNC machines... Tho only thing you got right is the sustainable materials side of things

@КинДзаДза-э8с Жыл бұрын

Ich frage mich, ob die in der Tschechischen Republik hergestellten Produkte qualitativ nicht schlechter sind als die in Deutschland hergestellten. Ich habe einen Kapex-Crosscut gekauft, auf dem steht: „Made in Chech Republic“.

Ең жақсы KZbin

Пікірлер