StoversMotors

Пікірлер

@edd1027 18 күн бұрын

doing that to a suzuki volusia except my frame was tweaked . not sure it's gonna make it yet.

@ShawnMurphy-hg8ib 21 күн бұрын

You have inspired me to build one now it looks fun.

@ShawnMurphy-hg8ib 28 күн бұрын

What sprocket set up do you have on it?

@ShawnMurphy-hg8ib 28 күн бұрын

Do you have any tips on the material i need to use to make one?

@StoversMotors 28 күн бұрын

@@ShawnMurphy-hg8ib steele tubing, 7/8” up to 1 1/4” is normally what im seeing them made from

@ShawnMurphy-hg8ib 28 күн бұрын

@StoversMotors thank you man can't wait to see more videos!

@JoshO-gn4wz Ай бұрын

For a 48 inch door can I use the 2 24 inch tracks they come with? Or should I buy a 48inch track?

@StoversMotors Ай бұрын

@@JoshO-gn4wz the tracks they come with will work fine

@ShawnMurphy-hg8ib Ай бұрын

Do you have a video of you making it. I wanted to know what angle and stuff you put it at

@ShawnMurphy-hg8ib Ай бұрын

I want to make the same one one my doodlebug.

@ShawnMurphy-hg8ib Ай бұрын

I want to make my wheelie bars just like yours i wish you had a video making it but i got the right idea now thanks man and i made sure to subscribe for ya.

@user-sw6nw Ай бұрын

i have the same motor with the same piston what ring gap did you guys use

@StoversMotors Ай бұрын

this was years ago and i cant remember , but the piston came with a spec sheet that we measured too

@gittledog 2 ай бұрын

Why did my head go back each time you tried to wheelie?

@mikehemens9359 2 ай бұрын

Dope!

@RamonDenis-d6o 2 ай бұрын

Nesecito una biela ho un sigueñal

@goofbooters5833 2 ай бұрын

Do you have part# of what you used to fix Problem

@Kennyfalkenberg 3 ай бұрын

Yo man where did you get the part at I have the same problem with my klx110

@haitianmajic 3 ай бұрын

My door doesn't have a lower pivot. It's falling off

@WoodResinCustoms 3 ай бұрын

Nice job showing how roller goes in

@tjarktriki3243 3 ай бұрын

What inch is this tire?

@One_rad_dad 3 ай бұрын

Still one of my favorites

@matthodson588 3 ай бұрын

Thats Bad ass man!!

@Jasspwns 3 ай бұрын

Amazing! Fixed my door with this

@RobertCarlson-e8h 3 ай бұрын

Wrong😂

@overit16 3 ай бұрын

The door at the end on the left is a little higher than to other doors. Sorry, I play the game differences a lot. 😅. It's all fun and games.

@hafizazakiya7847 4 ай бұрын

Whoever put the door here leaves it uneven n it’s bothering me😭I wanna fix it

@thetruthhurts6652 4 ай бұрын

Took you 30 seconds and took me all day. But I had to make a frame for the door.

@abwolfsto6039 4 ай бұрын

How much was this build

@wecomeinpeace5082 5 ай бұрын

That Scooby Doo was great

@spencervidal3168 5 ай бұрын

The KLR is an antiquated turd.. Mine was a piece of crap, and the worst moto I have owned in 50 years..

@matthewkirsch327 5 ай бұрын

good for you. Enjoy working on your tour rag.

@spencervidal3168 5 ай бұрын

@@matthewkirsch327 Ha! My Tuareg is 10 times the bike that turd is.. New the klr is not worth a dime.. After all the money I put into the turd of a klr I could have bought a Tuareg to start with..

@matthewkirsch327 5 ай бұрын

@@spencervidal3168 Awesome. Enjoy your $1 bike ;)

@spencervidal3168 5 ай бұрын

@@matthewkirsch327 Already am. I'll look for ya on the side of the road as I blow past you when your pulled over having to f#@& with your turd.. See Ya..

@acgrizzle7530 5 ай бұрын

Im stuck on installing the guide rail. I suspect there is some metal flashing i cant see but i cant get the screw to penetrate all the way in. Ive drilled pilot holes as well and nothijg seems to work.

@jnate331 5 ай бұрын

Should and does is different

@JoshuaRichards-w9x 6 ай бұрын

I'm having the opposite problem with a little Baja dr50. When I throw the kick it pushes the bike forward even when in neutral

@StoversMotors 6 ай бұрын

the clutch pack is probably stuck together, has the bike been sitting?

@JoshuaRichards-w9x 6 ай бұрын

@@StoversMotors maybe. I'm honestly not sure. Picked it up for free last night. I have the tranny case off now so I'll check that

@johnnyboy7902 4 ай бұрын

@@StoversMotors I'm having this same issue. replaced clutch pack with EBC, adjusted the screw til tight and backed it off 1/4. still same issue. im thinking it has to be trans related.

@robertoberll1741 6 ай бұрын

Hi, did you make any oil sump modifications to do such a long whelie? Im a bit scary about front cylinder

@StoversMotors 6 ай бұрын

no, my wheelies aren’t long enough to starve the sump, you can watch my videos and the oil light never comes on

@robertoberll1741 6 ай бұрын

@@StoversMotors So until red light (oil control) will appear, you think we safe? :)

@StoversMotors 6 ай бұрын

@@robertoberll1741 Yeah, cause you still have oil pressure until that light comes on

@drocks7764 6 ай бұрын

Advice on removing the carb? First bike. Thanks

@StoversMotors 6 ай бұрын

Dive in and start pulling it apart! Everyone has their methods for getting bikes apart, but sometimes you just have to do it to figure it out👍🏼

@epradob3493 6 ай бұрын

what ink is this? and what type of vinyl did you use ?

@wontonamera 2 ай бұрын

FN INk

@chevy_vette_6949 6 ай бұрын

Just bought this exact bike, you have no idea how happy i am to have found this video😭

@802_AirHead 7 ай бұрын

A list of parts would be great?

@houseoffire72 7 ай бұрын

Just what I need. Appreciate the video..!

@kd2833 9 ай бұрын

Total morron agean with no suit

@kd2833 9 ай бұрын

U know wheelie on sv will starve it from oil there aint bikes to wheelie

@StoversMotors 9 ай бұрын

yeah, if you do wheelies for a long period of time and the oil pools in the rear cylinder, im not riding them long enough to starve the sump of oil.

@Luis_241 9 ай бұрын

What are the parts called

@StoversMotors 9 ай бұрын

sprag gear. one way clutch, kick start bearing

@Carzarecool4 9 ай бұрын

Are they out of stock for ever???

@StoversMotors 9 ай бұрын

He makes them to order, so if you want one, get it ordered, if you need help, let me know, I can reach out to him👍🏼

@stonecoldkillaz9981 10 ай бұрын

Where can I get those parts?

@StoversMotors 10 ай бұрын

I got mine on ebay, they were shipped from Japan

@StoversMotors 10 ай бұрын

if you need help, let me know

@kevin11288 7 ай бұрын

Do you have part numbers? I have an 09 doing the same thing nearly. It only engages half the time.

@bonezcuztomz7703 10 ай бұрын

U still have it nice build

@jamesthebond0072 11 ай бұрын

Guy can’t even handle 200w 😂

@jarrodarias4200 11 ай бұрын

Way to much motor for that kid

@seelder 11 ай бұрын

Did this project ever leave the ground?

@StoversMotors 11 ай бұрын

yeah, theres a whole series on it👍🏼

@StoversMotors 11 ай бұрын

i have a playlist called “mini stunter 125”

@ziyadtariq9929 11 ай бұрын

What if there is a recoil and closet door does not close

@franktrujillo5459 11 ай бұрын

What windshield you have on that gladius?

@StoversMotors 11 ай бұрын

On amazon, Logo Street Bikes Wind Deflectors Windshield Windscreen for 2009-2016 Fit for Suzuki Gladius 650

@TailTaleOutdoors 11 ай бұрын

Using the bottom of the drill as a hammer is a classic move!

@robertreed5343 11 ай бұрын

I picked one of these up a while back. Would love some help replacing a clutch pushrod if anyone has or will do one!

@StoversMotors 11 ай бұрын

where are you located?

@trikester4919 11 ай бұрын

Thought I'd share a wheelie bar and flame thrower I put on my minibike kzbin.info/www/bejne/pZDaoXZ9j82geck

Ең жақсы KZbin

Пікірлер