What motor/esc did you use? I still have mine brushed and crammed everything in the battery bay area of a DT chassis with my 150mah packs velcro'd to the top. I killed my 2-in-1 2.4ghz board that losi offered that worked with brushed/brushless and 3 wire servo. I got some cheap brushed esc off amazon and decased a spektrum receiver also. Totally hack, but I just run this around the apartment once in a while for the cats to chase it. lol! Was hoping this was a 'micro-t' vs 'micro-b' video so I could finally see the size difference. The micro-dt is as big as I want for in the house. I have the micro-sct and it's just too big/too fast for my house, so it basically sits on the shelf. It has the old brushless 2.4ghz board in it, but only binds with a DSM1 transmitter, so I don't use it. Was kind of odd as the one in the micro-t before I ruined it would bind with a DSM2 transmitter (DX5C) that I use.
@chasentrophies4 күн бұрын
Full build list is in the description! I've been lacking in the videos, I need to get back to them I should do a video on the 2 micros then and now+
@olds97lss3 күн бұрын
@@chasentrophies Ah, didn't see that at first. 10300kv?!?!? That seems super high!
@gamercat70045 күн бұрын
I got myself a jrx2 the black one and its too nice to get dirty but one day I'll have to get the rc dirty and only drove it on the parking lot.
@nitrojunkie267513 күн бұрын
One more thing, you can spray 3-4 coats of FLEX SEAL on the inside of your body works great
@nitrojunkie267513 күн бұрын
I think it goes on ur steering wheel on ur remote!!😂 congrats on 500 Ohh I should have kept watching b4 the comment, that is sick man👍
@nitrojunkie267513 күн бұрын
Great racing👍👍, really enjoy the videos
@nitrojunkie267514 күн бұрын
Bad luck on the DNF, ur day is coming man👍👍 ty for the footage
@nitrojunkie267515 күн бұрын
I just found your channel today, I just had wrist surgery on my dominant hand yesterday and im bing watching ur videos It will be several weeks b4 I can hold a radio again, videos are getting me through the pain!!👍👍
@chasentrophies15 күн бұрын
@nitrojunkie2675 fuck yea man! I hope for a speedy recovery man! Worst case there was a guy at the masters of dirt, homie had one arm and was still in the A and did the trigger with his middle finger. And steered with his thumb and index I was SHOCKED. Dedication! Glad they are bringing you joy!
@nitrojunkie267515 күн бұрын
Great channel buddy, you got my vote
@Restless201022 күн бұрын
Disconnect the upper control arms at the hub, mount the transmission, tilt the axles out insert them into the transmission and reconnect the upper control arms. Boom.
@chasentrophies22 күн бұрын
@Restless2010 you're 100% right But as a full time mechanic as a living 🤣 i gotta make everything complicated in the pursuit of not removing excess hardware Definitely easier ways to do what I did but that's just how my brain works for some reason
@bra1nc417dАй бұрын
Now we need a Micro-B video. I just ordered one but they're OoS till March or so....Sucks. I ordered it to have something to do indoors for winter.
@chasentrophiesАй бұрын
@@bra1nc417d will do!
@Doomey102 ай бұрын
You race like an asshole😂😂
@andrewclark-ql5eg3 ай бұрын
How to get a hold of the guy who makes the chassi
@chasentrophies3 ай бұрын
@andrewclark-ql5eg i linked his ebay, and he's on the Facebook page, he's an admin. He has some colored carbon chassis for sale! So go find him!
@hunterbreland56123 ай бұрын
whats your recommendation for a stock replacement battery thats still compatible with the quick charger?
@chasentrophies3 ай бұрын
@hunterbreland5612 i dont have one, id gut the whole thing and replace it all. The factory RX is just bad IMO, and the transmitter takes 8 AA, rather than the modern 4AA I would go this full route. You can save some money with this though Readytosky RC 20A Brushed ESC Electronic Speed Controller w/Brake for RC Car Boat Tank(2PCS) a.co/d/2xnh1wn Keep your factory brushed motor
@chasentrophies3 ай бұрын
@hunterbreland5612 These servos I've also used. They don't fit, i took alot of time sanding all 4 sides of the servo and even then it was SUCH a tight friction fit inside the factory chassis. But they perform well when installed Beffkkip 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat a.co/d/8uYnD07
@chasentrophies3 ай бұрын
@@hunterbreland5612 people do use 1cell lipos for factory RX/ESC
@Iamkickz3 ай бұрын
I cannot find the group with the name you provided.
@chasentrophies3 ай бұрын
Should be first thing to there! Super active right now with the new micro release
@DudeWiththeClue3 ай бұрын
This makes me want to rebuild my micro t. I'm super happy that you showed all the parts you used!
@chasentrophies3 ай бұрын
Glad I could help!
@DavidVidaurri3 ай бұрын
I’d like to see a micro race❤
@chasentrophies3 ай бұрын
@@DavidVidaurri man that would be alot of fun
@allscalerc3 ай бұрын
Those are awesome! I need to get me a micro! I just subscribed to your channel. 👍👍👍👍
@julionieves80903 ай бұрын
I used to have 2 of the micro. I wish I never sold them. My friend wanted them when I was younger. So we worked up a deal. and his dad bought them from me. Wish I never got rid of them 😢
@chasentrophies3 ай бұрын
Damn! Well the new micro B is here! And the chassis losi micros can be found on ebay! So you have options again!
@josephlafluer72663 ай бұрын
I found mine recently, I don't have the radio bummer. I believe it needs gears. I asked losi in a DM a couple months ago for parts that we need the mico t to make a return and here it is! Nice
@NBC_NCO3 ай бұрын
I've been doing RC since the late 80s. I quit in the mid-90s. After the Army, I am back into it. I have never seen this little buggy. Very cool.
@ebandcamp3 ай бұрын
Could solder all the leads to the receiver . Cool !
@chasentrophies3 ай бұрын
@ebandcamp yea but then it's a pain in the neck to remove anything, i was thinking a sanwa receiver would fit great layed down too
@RockRodRC3 ай бұрын
I love this, I always wanted a micro t when I was younger. Hopefully these little guys make a comeback!!
@dflunk53813 ай бұрын
Micro B released this morning ;) Ironic timing!
@RockRodRC3 ай бұрын
@@dflunk5381 I know man I saw that like oh perfect timing!
@itsz24583 ай бұрын
2-in-1 Brushed ESC / SLT Receiver: Micro B/T ( part number SPMXSE2825RX) It is designed to be paired with the LOS-1870 motor
@chasentrophies3 ай бұрын
I was editing this video and checked my phone, and the micro Facebook page was going NUTS over a leak of the new buggy... I was like "REALLY?!?!?!?" IM EDITING THE VIDEO RIGHT NOW!!! lolol I'm great full, the hype on the new micro is really boosting this video and my channel. love to see new faces!
@RockyMtBashers3 ай бұрын
Sick dude
@chasentrophies3 ай бұрын
🤘🤘🤘
@jeffro10053 ай бұрын
Chase ! What up brother 😊
@chasentrophies3 ай бұрын
Hey hey!
@arhamrasool433 ай бұрын
Losi is set to release a new micro b soon
@chasentrophies3 ай бұрын
@arhamrasool43 I noted in the video about that 😆 While editing this video the buggy 🤣was leaked 🤣🤣🤣
@lgrc61203 ай бұрын
Bug was awesome. Show us when finished
@lgrc61203 ай бұрын
Sweet video mate! went to sub and already was😅
@BigDsRc5173 ай бұрын
It's been more than long enough for a new release of the micros ......cmon losi let's get on it already 💯
@sincitycrawler73753 ай бұрын
They will be in about 6 hours from right now
@citizenone45463 ай бұрын
They just released them starting with a micro b. Check out their site
@16-BITFPV3 ай бұрын
They'll probably never make another 1/36 scale. That new 1/24 buggy they call it a micro.
@chasentrophies3 ай бұрын
The 36th ran for a while and died to the 24th line of 4wd cars back in the day. So I can't blame them, they tried it once! And 24th won, so why try again
@sinistercustomsx24343 ай бұрын
Awesome video great info!!! Love my micros!!! Mini Z esc receiver boards work great as well if you want to keep the 5 wire servo
@chasentrophies3 ай бұрын
@sinistercustomsx2434 i was curious about the new hobbywing mini z esc but I figured I've used this system before and liked it
@Sampson-b5v3 ай бұрын
Word up
@jokersnyderracing94583 ай бұрын
Might be about time for you to get me new bodies so I can make them even better
@chasentrophies3 ай бұрын
@@jokersnyderracing9458 id be down!
@user-sy4ko7yq4c3 ай бұрын
wait you heard about new truggy coming out??.The rc8T4.1e?.im confused
@chasentrophies3 ай бұрын
@user-sy4ko7yq4c oh! I just caught that now that you say that. Its not a 4.1 I'm an idiot and don't know what I'm talking about! Loooool oops Yea just a standard 4.0 my bad
@butch68193 ай бұрын
As you need to shake your lactate every time you use it, it separates
@chasentrophies3 ай бұрын
Shake my WHAT NOW?
@PredatorRacer893 ай бұрын
I would just buy pre mounts this seems like so much work!
@chasentrophies3 ай бұрын
Not common in the race world! Sadly you can't trust those either! In a race scenario you want reliability!! So you gotta make it yourself!
@PredatorRacer893 ай бұрын
@@chasentrophies Well I went from really wanting to get into racing to now it seems like a LOT of work/tinkering to keep these things going.
@chasentrophies3 ай бұрын
@@PredatorRacer89 that's the fun of it!!
@BillyDowling-q3m4 ай бұрын
What size is the pipe they use to make the tracks
@chasentrophies3 ай бұрын
I think 4"?
@LameduckArmyOF14 ай бұрын
HELLA PAINT JOB ON THE SHELL!
@chasentrophies3 ай бұрын
Haha! Which one??? Lots of shells in this video
@EarlyOVictor4 ай бұрын
What is the wall mount hanging system you have in the trailer for your rc cars?
@chasentrophies3 ай бұрын
I think it's just hooks for like rakes or shovels. Spaced properly for control arms
@mattstewart83515 ай бұрын
Great video! Remember though, you’re out there FOR FUN! We are racing toy cars! I get upset too on the drivers stand, but nothing is on purpose or out to get you. If so, then you can say a few words LOL.
@chasentrophies5 ай бұрын
@mattstewart8351 my problem is I grew up shit talking on video games!!! 🤣🤣 it's in my blood! I've only ever got heated at someone other than myself once. And immediately apologized when we wrapped up marshaling
@chasentrophies5 ай бұрын
@@mattstewart8351 but trust me! On that driver stand win or lose, I'm having a fuckin BLAST
@imabigfanbro5 ай бұрын
Hey love the series, do you know were you got the rocklights from?
Brother I am out of Fayetteville, Nc. Where is this track at. When I Google RC tracks they all seem to be over and hour and a half away. The one here in Cumberland county closed over 20 years ago because of noise ordinance lol. Sweet track!!!
@chasentrophies5 ай бұрын
@@GrandPitoVic this is Lumberton I believe
@GrandPitoVic5 ай бұрын
@chasentrophies Hell yea!!!! I'll have to see if that one pops up on my maps. If so that's like 45 minutes away from me.
@calebg595 ай бұрын
Nice video. Love Rc off-road racing
@M_i_n_d_W_a_r5 ай бұрын
FireTeam 🤘🤘😂 my first RC Car in a long time
@dizzychizzy15 ай бұрын
Sick track!
@chasentrophies5 ай бұрын
@@dizzychizzy1 one of my favorites!
@MightyMouse13215 ай бұрын
I live in South Carolina and know it well
@RoryHollarTURTLERCRACING5 ай бұрын
Some dam good driving…..! Great video as well….! E-buggy pays the bills …. As Keenan says…. lol 😎🦾🧀
@chasentrophies5 ай бұрын
@user-lv2kd6od6d 1000%! Idk why I was suckin so bad in ebuggy! Just a rough weekend Truggy was way too fun in the 4.0. Chassis!
@RoryHollarTURTLERCRACING5 ай бұрын
@@chasentrophies you did kick some azz😎🦾
@chasentrophies5 ай бұрын
@@RoryHollarTURTLERCRACING thankyou dude 🤘🤘
@RC-Zombie5 ай бұрын
nice buddy love the videos you put out and some good runs
@chasentrophies5 ай бұрын
@@RC-Zombie thankyou! 🙏🙏
@Jwsmart37085 ай бұрын
hey bud it was cool chatting with you during the pro -am, I definitely would like to know where to get them tire dots I think they look cool as heck!!!
@chasentrophies5 ай бұрын
I cut them on my cricut!
@Jwsmart37085 ай бұрын
@@chasentrophies so did you make them and then cut them?
@robertkouns30785 ай бұрын
Sweet vid, I'm planning on hitting Fall Brawl later this year. You should come to VA for a race sometime...
@chasentrophies5 ай бұрын
@@robertkouns3078 I need to!
@p_hat5 ай бұрын
wow! great vid. pro am looks a lot of fun
@CplVeers5 ай бұрын
That's been my experience so far with the T4e, its a very happy truck and takes some really bad driving to upset it. But I run actual truggy bodies because truggy bodies look 100% better than bruggy.