Jim Diggins

Пікірлер

@bryantbalderas9705 Ай бұрын

Are you willing to share your spreadsheet?

@troybroussard6464 2 ай бұрын

Jim, not to be critical, but you have the polarity of your voltmeter backwards. Bently uses a -24VDC power supply and the output of the proximeter is (-) negative. This is critical when understanding the gap voltage is part of diagnosing a machine condition. It is use for radial shaft position (X/Y) and axial position for thrust measurements. Monitoring shaft centerline using DC Gap voltage can tell the analyst alot about shaft position in the bearing. When using a standard proximiter, it is -24VDC and when using the Bently 990 transmitter, it is +24VDC. This is also critical to know because the phase reference on the 990 transmitter is 180 degrees out of phase.

@Somethingspecial897 2 ай бұрын

Hi, Great video 👍🏻👍🏻.. I have a doubt. How to calculate ISF %error manually ? Please share the formula. Thank you 😊

@jimdiggins101 2 ай бұрын

@@Somethingspecial897 the LINEST function in excel is good for calculating a deviation from straight line for a set of data points.

@autolancegega599 2 ай бұрын

Thanks for explaining it in a simple and not missing the technical and application of the Proximity probes, a great help to instrument techs and engineers.

@williamsbautistagarcia3825 2 ай бұрын

Muchas gracias, excelente explicación .

@williamsbautistagarcia3825 2 ай бұрын

Gracias, excelente explicación.

@kambunastory 2 ай бұрын

Great explanation, very informative Thanks SIr

@harounemoussa2453 3 ай бұрын

did it thank you Mr jim

@jimdiggins101 3 ай бұрын

You betcha

@darrelthompson 4 ай бұрын

Greate information in this video. Is there a link somewhere that I can download your Resistance Check Spreadsheet?

@OdiagamerAb 5 ай бұрын

Thank you sir....god bless you....keep posting knowledge.....i really appreciate your hardwork...

@hatemmoussa7467 5 ай бұрын

How much is this kit?

@raulmota1318 5 ай бұрын

Hello buddy, can you provide this spreadsheet?

@sivasrinivas3716 6 ай бұрын

can i use 8 mm probe to measure radial vibration of a 27 mm nickel alloy shaft?

@Time4yes 7 ай бұрын

Say, I am using the same valve but I have been given values to start the valve travel at 11 and 13 psi as my full travel. Should I adjust the spring tension first according to these values or should I do on the positioner?

@jimdiggins101 7 ай бұрын

The actuator should have a rated benchset and travel distance. When the control valve assembly was engineered, the actuator specs were selected based on the force required to operate the valve. This test verifies the actuator performs according to the original design. The positioner reduces the error that is a result of mechanical friction.

@Time4yes 7 ай бұрын

Thanks

@sam.castaneda22 7 ай бұрын

Need some videos of repairs out in the field

@sam.castaneda22 7 ай бұрын

Im having issues with a valve currently for leaking by. Hard to find the right kits or someone is not getting the right info for them. Is there a website or something to find the right kits? Based in west texas.

@jimdiggins101 7 ай бұрын

Emerson owns Fisher Valves. From the Emerson website you can find the local business partner as well as drawings.

@cavourmartinelli9381 8 ай бұрын

Simple explanation, but hard to find it. Do you know any supplier I can buy proximeters from? I am located in Brazil.

@jimdiggins101 7 ай бұрын

I don't know. Baker Hughes owns Bently Nevada and they have a global presence. I'm sure there is a local representative. I would check their website.

@Gregjm-v3t 8 ай бұрын

Hi. Where could I get your excel table ? I would like to get it

@jimdiggins101 8 ай бұрын

Build it in excel. I show all the necessary formulas in one of my videos.

@Gregjm-v3t 8 ай бұрын

Thank you Sr. I'll do it

@dipakbhalodia7155 8 ай бұрын

Can you provide exell sheet formula

@dipakbhalodia7155 8 ай бұрын

Your email id please send

@liranhefetz5527 8 ай бұрын

PLEASE... Can you provide excel sheet? Thank you very much! +++

@sajidkamal8199 8 ай бұрын

What is tha input and output radial axial vibration plz answer

@jimdiggins101 8 ай бұрын

I am not sure what you are asking. Can you provide some context?

@vinaysane5435 9 ай бұрын

Like Video.

@omagbemigold2321 10 ай бұрын

NICE JOB 👍 WELL EXPLAIN

@s0nnyburnett 10 ай бұрын

Simple to the point explanations, thank you.

@karimkrimou1513 11 ай бұрын

Thanks sir, it is a very informative vidéo with a clear explanation

@abylabylabyl 11 ай бұрын

where can I get the test sheets?

@wapeekung Жыл бұрын

Can you provide excel sheet? Thank you very much

@xrafter Жыл бұрын

How does the eddy current generate in the metal? Does the varrying magnatic field has something with it?

@jimdiggins101 Жыл бұрын

You are correct

@jeanoliveira8837 Жыл бұрын

WOULD YOU LIKE TO SEND THE TALEBA FOR SENSOR CALIBRATION

@kithtube Жыл бұрын

Good exlonation jim,thanks.

@husseinjavan-bg6sv Жыл бұрын

Dear sir. I have two probes with different part number, PN: 86691-08065-0435-25 and PN:86691-09246-0435-25. I only know they are 2.5 m length but i am not sure they can be used interchangeably. Is it possible? What are their differences?

@jimdiggins101 Жыл бұрын

I don't have that manual, so I cannot say for certain. From a performance standpoint it should work. Difference will be in the custom features. Such as mounting options, length of armored jacket, etc..

@Nastradumas6156 Жыл бұрын

Very good explanation, now I have a better understanding of Proximity probes.

@instrumentationbasicknowle2872 Жыл бұрын

kzbin.info/www/bejne/p5WVXoGcnNF6nNksi=pr6vKxgK2ZchdIKA

@josepatino7142 Жыл бұрын

Can you provide excel sheet? Thank you very much

@arturogonzalez2220 Жыл бұрын

Jim, where do you get the values for Peak to Peak travel and Measured Value?

@jimdiggins101 Жыл бұрын

I posted videos explaining how to perform the dynamic and static tests.

@hondat7435 Жыл бұрын

hello, when i connect the power supply 24VDC positive to the com and negative to the Vt(-24 VDC) it creates an alarm on the power supply and shut down the power supply. Please advice on wiring?

@jimdiggins101 Жыл бұрын

Power to com and -24. Output signal to out.

@crunchyrollo7474 Жыл бұрын

Thank you very much for the information, although I have a question, at minute 2:24 you put the value of 1 in the voltage column. why 1? What shouldn't be 10mil*200mV= 2V?

@jimdiggins101 Жыл бұрын

The response rate of 200mV / mil is only valid within the range of linearity. 0-10 mils is outside this range.

@nukeworker83 Жыл бұрын

Best video on youtube!

@michaelmorgan9536 Жыл бұрын

How tight should the jams be tightened. What are the risks of not setting the jam nuts?

@jimdiggins101 Жыл бұрын

The jams keep the connection block in place In most applications, the feedback arm connects to the block. In some cases, even a slight rotation can create feedback error or loss of position indication.

@임기정-x5p Жыл бұрын

What do you supply proximity power with? What kind of lines?

@mohammedsaib3844 Жыл бұрын

Excellent work 👍

@shanegovender6780 Жыл бұрын

Hi thanks for the video ! We bought a couple of these fisher control valves and we noticed that they don't all have the same bench set values, what's the reason for this ? I also noticed that you did your bench set from 9 to 15 psi, so when will the valve start to move? Is it 9 psi or 3 psi?

@jimdiggins101 Жыл бұрын

The bench set is engineered to operate the valve based on the process stream and will determine the pressure required to open the valve.

@shanegovender6780 Жыл бұрын

@@jimdiggins101 thanks so much for the Response! Atleast now I know that I didn't buy the wrong things 😃

@JesusEmmanuelGoneCadena-pd2ug Жыл бұрын

Dear Jim thanks for video, I only have two questions, at the end we obtained values that were out of tolerance, right? And this was probably because we use other extension cable model, right? In advance thanks for your response! And good job!! 🤘

@jimdiggins101 Жыл бұрын

Correct. Incorrect length is the most common cause of error

@andinstrumentcontrol4159 Жыл бұрын

Excellent!Can you provide excel sheet? Thank you very much

@InstrumentTechnicianVP Жыл бұрын

Thank you for your video. I have a confused question " Can vibration monitoring module supply +24VDC and -24VDC ?"

@jimdiggins101 Жыл бұрын

Are you referring to the proximitor card on the bently nevada monitoring rack?

@InstrumentTechnicianVP Жыл бұрын

@@jimdiggins101 Yes, Sir

@uncle_joe Жыл бұрын

interesting...

@playaloc Жыл бұрын

I seen some valve bodies have a line on it instead of a flow arrow? Is the line an indication for flow?

@jimdiggins101 Жыл бұрын

Some have a line on the body that has a downward angle, which represents the flow path through a globe valve. That may be what you are referring to. This alone does not indicate flow however, but for general service, you install with the angled downward part facing up stream so the flow enters below the plug and flows up through the port.

@playaloc Жыл бұрын

@@jimdiggins101 thanks for the info.

@lovesaudiaam3189 Жыл бұрын

Excellent

@jimdiggins101 Жыл бұрын

Thanks

@nino4676 Жыл бұрын

Thanks

@Bwup Жыл бұрын

thank you

@jimdiggins101 Жыл бұрын

You're welcome

Ең жақсы KZbin

Пікірлер