Super informative video. Going to get solar panels installed in the next 6 months. So i will make sure something is done when its installed.
@artful-bodger4 күн бұрын
Good luck. With my last solar installation on a rental property, I managed to get the price down on bird protection with a bit of haggling. From the installers perspective it's an easy job and some money is better than none for them!
@WilliamRawlings-v5g6 күн бұрын
Mine has grey buttons and stops at p04 and goes back to p01. Any thoughts on why
@Calzone_J26 күн бұрын
I have the same screen but my mph doesn’t seem to work? Help?
@yusifr1Ай бұрын
Thanks so much i had no idea how to switch to mph or reset odo
@nixonsmateruby1Ай бұрын
Can you explain p13 please
@globoyym9678Ай бұрын
I have error 07 what does this mean
@ryanseft6528Ай бұрын
Life saver thanks
@kappazeta47Ай бұрын
Does anyone know how to reset the factory settings?
@edgarfishingfishesАй бұрын
Wow! I just bought this controller and KZbin knows I needed to see it. Amazing!. Good job thank you’!
@artful-bodgerАй бұрын
Clearly the KZbin algorithm is powered by witchcraft!!
@BLICKBEANZ2 ай бұрын
Life saver thanking you
@lilymurray89062 ай бұрын
if you didn’t go as fast maybe i could build the bed
@artful-bodger2 ай бұрын
Sorry, it's always a balance between making the video easy to understand and not being too boring!! You can always pause and rewind!
@hoboyeti2 ай бұрын
How do you get rid of the constant smear/hand prints?
@artful-bodger2 ай бұрын
Not really been an issue actually!
@harveysmith-f3e2 ай бұрын
jus copied this and bike stopped working
@umi.1498Ай бұрын
LOL
@Freakk473 ай бұрын
I don't understand where to put the exra wire. Yes in the cup but how. It ruins the "screw" bit cause the wire wont go straight down anymore. Been doing this for two hours now and I can't get it to screw
@simonrees46313 ай бұрын
Hello, I just installed one of these kits but I get a ringing noise when I apply the back brake, do you get this or know how to stop it! I have made sure it is perfectly aligned and cleaned sanded the pads etc.. Cheers
@calchandler54853 ай бұрын
very helpful, 1 question, the magnet types im unsure what to set mine to as i have a 1500w motor
@davewalker-hf1wg3 ай бұрын
The only way to avoid a wren kitchen disaster is dont buy one brothers just paid £15 grand thay are not worth it full of problems honist save ye money and go somewhere else promise you
@martinbrouillard40903 ай бұрын
Hi I played around with tge settings not knowing what I do and then well now It's not normal I guess It's because I don't know P07 and P13. Is there a way back to default mode?
@Rylar1263 ай бұрын
Can’t hear ya properly over the backing track.
@artful-bodger2 ай бұрын
Sorry, will make it lower on the next one. Have you tried subtitles?
@jennyvieve91083 ай бұрын
Did the parts and instructions they provided to mount on the wall work for drywall? Or did you have to use an anchor to make it secure?
@colewaterhouse69723 ай бұрын
Most helpful video I’ve ever watched.
@artful-bodger2 ай бұрын
Thanks. These video do seem to be popular. Really glad you enjoyed it.
@KillersGG783 ай бұрын
Where did you use heat shrink to make it waterproof ?
@robyn65213 ай бұрын
How's this solution working out for you? I got a PIR sensor electrical plug to use on my Christmas tree and really enjoyed it until the forced-air heating started triggering it. What kind of false triggers have you experienced? Based on my experience with that PIR plug, for my Jack and Jill bathroom issue, I don't consider PIR alone will be adequate. I think it would be good to add to the poster that the doors unlock automatically if the power goes out.
@avroml3 ай бұрын
It's easy if the missing part is a bolt or a screw, but if a structural part is missing from the box, and you didn't check it within 14 days from the purchase, then you're basically screwed. I've just realized that I've thrown €600 out of the window, because one leg of a fancy desk I've bought a couple of weeks ago is missing. My bad, my fault, I didn't check the package right away. The lovely telephone consultants and helpful customer service employee at the store were doing what they could, but there's nothing that could be done and they are very sorry. That's it, I probably need to improvise it myself.
@freedomofmotion4 ай бұрын
Mine has pincode in the settings menu
@enjoyurlife45654 ай бұрын
Thank you
@davebrown25274 ай бұрын
Holding top 2 buttons the screen will go into another menu then pressing the same 2 buttons you can cycle through to display actual battery voltage an voltage drop in use
@benayres27064 ай бұрын
Hi mate have you got video on the nuts and bolts go on the rear dropouts?
@diegodebrito36114 ай бұрын
Genius idea💡 , I taught I need a bracket with the hook, so I’m glad I watched this video, so I don’t need the bracket, only cable ties 🤓
@MazichMusic4 ай бұрын
My cheap Ebike has a similar power switch, but a different controller. The manual does not state how to change settings, though the P codes appear to be the same. I will try your instructions on my bike at first opportunity.
@uria7024 ай бұрын
It all comes down to the installer you get and if they’re good at installing kitchens. The cabinets themselves are fine.
@artful-bodger2 ай бұрын
Totally agree which it's why doing your best to get a good one.
@TheOHFiles4 ай бұрын
This was a very helpful video. I have a problem that just started. The PAS works great but the throttle tops out at 12mph. I can PAS pedal to 28mph..what gives?
@TheHappyDIYGuy-ri8nb4 ай бұрын
my throttle lags any thing I could do about that?
@MrJokerh614 ай бұрын
Brilliant videos 📹 as always cheers 🍻
@davewalker-hf1wg4 ай бұрын
2 tips before you buy a wren kitchen 1 don't bother and 2 look somewhere else for a better kitchen brother has just paid 15 grand and fitting a total mess believe me mess
@davewalker-hf1wg4 ай бұрын
Honestly am given you advise before you waste your money don't bother with a wren kitchen nothing but problems shxte
@MGWAIKIDOJITSU4 ай бұрын
Hiya so my screen arrived sw900 it has two connection ports a 5 pin and a two pin ,I have no idea where the smaller two pin goes, I have fitted the 5 pin and I followed your set up , but nothing registers on the screen but the bike works on pas and horse off far to fast , mph not workin , watts not working but the screen illuminates with battery at 75% , obviously the two pin goes some where is your SW900 like this .?
@davewalker-hf1wg4 ай бұрын
Are kids just paid 15 grand for a wren kitchen fitting apsulute rubbish DONT bother 😭
@bertieboyer39685 ай бұрын
"promo sm" 😥
@dougf949125 ай бұрын
The 'quality' of that installation is so outrageously bad!
@Asteroids-i8h5 ай бұрын
Hi, do you have a link for the analogue sticks please.
@davideyres9555 ай бұрын
Jesus. Punched a hole in your roofing felt rather than running it through the overlap. I’d have gone spare as that’s going to leak at some point. What a bunch of cowboys. I think you need to get a review of the installation and issue a court action against them. Refusing you guarantee because you didn’t sign it? If it is the same company as the one on the internet with the same name but no space between the first 2 words it seems that they complain about their customer bullying them. From a legal stand point they are in breach of the consumer rights act especially if this was within the first 6 months so I would have put it to him in writing he either responds as requested or you would have to take the matter under legal advisement. With that level of workmanship I would probably not let them back on site and gone for a independent expert review and then hand it over to a solicitor. Make sure you have family legal on your house insurance and then get them to pay for the court case. It makes my blood boil when people in business make comments like you refer to. You gave them instruction, they accepted the job, did the work and you paid them money. A contract exists and is governed under the consumer rights act.
@artful-bodger5 ай бұрын
To be fair to them, it was four and a bit years after installation and the workmanship guarantee would have been five years. It was more the attitude I objected to. I think it was installed in a rush it get it done before the feed in tariff ended.
@artful-bodger5 ай бұрын
Get £200 off a Wren kitchen here artfulbodger.online/wren-referral
@artful-bodger5 ай бұрын
Anyone interested in the installer that let me down, it was Tech For Energy.
@MGWAIKIDOJITSU5 ай бұрын
This has been a great help mr Bodger ….my new screen comes in 7 days I can wait to install it 👌👌
@martinbutcher43053 ай бұрын
I keep getting error 11 I think it's in my settings as it worked fine til I started tweaking the settings improperly my fault ow I've had to set my wheel size to 16 instead of 26vto get accurate speedometer I think it's my speed sensor setting
@isisandwolf44185 ай бұрын
I think it encourages incest lol I think we should go back to one main toilet and bathroom for the whole household !!
@artful-bodger5 ай бұрын
If you're still trying to decide where to get your kitchen, this might be of use. I did a load of research and decided on Wren. If you decide to go with them, use this link and you get £200 off! artfulbodger.online/wren-referral
@murphythemullet5 ай бұрын
Great video
@artful-bodger5 ай бұрын
Glad you enjoyed it
@jimharvey2k5 ай бұрын
For anyone installing this kit the Open Source Firmware is essential. It'll allow you to bring the cadence up and improves the ride immensely. You can also change the assistance levels as the difference between off (cycling through treacle) and level 1 (easy riding) imo leaves no in-between
@njh82773 ай бұрын
How do we get the open source firmware?
@gavincollins93765 ай бұрын
Tip 2 is poor advice as you pay way over the top for the kitchen being fitted, plus many of their fitters are poor at best.
@artful-bodger5 ай бұрын
I'm sure you're correct, I just liked the stress free aspect of Wren doing it all.
@gavincollins93765 ай бұрын
@@artful-bodger Stress free....You have very little experience of Wren and their fitters
@artful-bodger5 ай бұрын
@@gavincollins9376 I can only speak to my own experience. Appreciate others have had bad experiences. Even more reason for tip 3.
@gavincollins93764 ай бұрын
@@artful-bodger But your tip 2 is incorrect so tip 3 is irrelevant..Even Wren says to get your own fitters as they have too many complaints about poor fitting...
@artful-bodger4 ай бұрын
@@gavincollins9376 As I say I can only speak to my own experience. Also remember news of a bad install will always travel much faster than that of a good one. The fact that Wren are one of the biggest suppliers is always going to mean there are a lot of negative experiences online. They definitely aren't perfect but I personally had an exceptionally good experience because of the tips I mention.