What’s the difference between the Tillotson TF-8A-6C Carb and the Tillotson TFB Carb?
@dreece20007 ай бұрын
Did I really just watch a video of a guy push mowing and have to take his word that he might have this carb on it
@Psy6o11 ай бұрын
Their website like he said or a dealer lmao
@donnywalker4691 Жыл бұрын
cool tool what is a baseline setting for the jets great video
@Deans64 Жыл бұрын
will this work on a b/s 5 hp 1995 i/c whit a intake
@charlesdemirjian742 Жыл бұрын
If it's got the right bolt pattern, it should work. Check it here: tillotson.ie/wp-content/uploads/2016/12/TF-Sketch-with-Dimensions-v1.jpg
@AlexanderGarcia-my2qd2 жыл бұрын
Will you please do a video of replacing the stator on the 212-EE TILLOTSON ?
@jimduganhard3 жыл бұрын
Has to stop to empty the bag every 3 turns😭
@joshuabuhler27323 жыл бұрын
Are you bagging that
@ninopecillo28213 жыл бұрын
Where can I get the tool for this
@wiredforstereo3 жыл бұрын
Wow, it really does maintain RPM. That kind of stuff would plug up a regular lawn mower engine. Do you have a TCT carb that would fit something like a big V-twin lawn tractor engine?
@MudMotorsMax4 жыл бұрын
I'm wanting this for my Mud Motor
@stephenlanejr18374 жыл бұрын
Nice cotton grass nice cut grass Michigan do that
@jacobsebastien39104 жыл бұрын
Tillotson Power 💪
@Deucealive754 жыл бұрын
And your 140cc engine probably costs a small fortune. If you keep your grass cut you wouldn't need anything like this anyway.
@jacobsebastien39104 жыл бұрын
Tillotson Engine's 💪😏
@oscarluebbert82484 жыл бұрын
need info about this
@mustangdbest2205 жыл бұрын
Wayy to slow engine speed needs to be wayy higher
@mustangdbest2205 жыл бұрын
Put the engine speed faster.
@webhomemadeprojects11735 жыл бұрын
Sry but shut up so I hear the engine because it make the sell not ur voice. Sry man
@terryturbina36266 жыл бұрын
Useless toll
@charlesdemirjian7426 жыл бұрын
You can order them from the shop section of the Tillotson website, tillotson.ie (direct link: tillotson.ie/product/sa500-quick-jet-manuel-jet-adjuster/) or check with EC Distributing ( 615-446-6807). I believe they have some in stock although they are not listed online.
@calvingibson13386 жыл бұрын
Whwre did you get the tool at.
@johnfreeman29566 жыл бұрын
Hello Tillotson! This video was very interesting, but can you please make a new one? Filmed in 1080p so we can better see what's going on? This is 7 years old now lol
@aghasamiei6 жыл бұрын
dear sir,I have problem with adjusting hl series carb,when I completely close the choke shutter engine start and work idle with no problem,but when I open it the engine working high speed and I had to close it again,can you tell me about this problem please?
@Tillotsoncarburetors6 жыл бұрын
Yes indeed. It’s an RK-14HU. It’s available at our online shop at Tillotson.ie and at several other sites (one good source is mowers4u.com).
@ChrisUrsiny6 жыл бұрын
excellent video, i had a quick question if someone could answer it for me a have a 1980's stihl chainsaw and it has a tillotson carb on it, the carb type is HU51A-323. are carb repair or overhaul kits still available for this carb? thank you.
@JentleRain7 жыл бұрын
Who makes the motor? If it's Chinese, they aren't meant to run for extended periods of time - in other words, crapola.
@thegeokiller15296 жыл бұрын
Ernest Loyer what is so bad about China thats ware the 212cc is mand
@Tillotsoncarburetors5 жыл бұрын
It is made in China but to our spec and with our affiliated subsidiary overseeing production. We've spec'd in key parts so the engine runs longer and better than the stock engines I think you're referring to. Adding the TillotsonTCT carburetor, available separately as an upgrade, will enhance durability further.
@normanwells27557 жыл бұрын
Do these instructions generally apply to 45 year old carb models as well?
@Tillotsoncarburetors7 жыл бұрын
Generally yes if it's a diaphragm model (HL, HK, HT, HS or HU). You can also search KZbin for other videos on your specific model.
@normanwells27557 жыл бұрын
I have an HR. But this video was immensely helpful. I had it all apart outside and wondered what I might lose or put in upside down. So I brought it in and watched this and put it together and by golly she ran. Thanks. One thing I found a bit confusing is that you have to work on it upside down. I had to keep reminding myself top diaphragm on the table was the bottom one on the engine.
@sergiofuentes71037 жыл бұрын
When you say adjust the lever to be flush, how to adjust it? By loosening the screw holding the fulcrum arm? Or by adjusting the spring?
@Tillotsoncarburetors7 жыл бұрын
No, keep the screw tight but gently bend the lever up or down so the end is flush.
@defaultlx75397 жыл бұрын
do not buy this product is it it is a piece of s*** folding handle bent starter Jiggles around the key start started twice out of about 100 times the remote started once I paid $1,300 to keep pulling the crank over do not buy it lasted a month and a half they are full of s*** china-made junk you've been warned
@Tillotsoncarburetors7 жыл бұрын
We're really sorry you had such a difficult time with the generator. I'm a little concerned you did not buy an authentic Tillotson generator because our most expensive generator retails for under $1100 and your dealer or our warranty department should have quickly offered to replace it. If you're still having problems, contact Charles at [email protected] and we'll get you sorted out!
@marcosseleguini83139 жыл бұрын
Boa tarde, Amigão. Eu tenho um parilla com carburação dupla e não estou conseguindo afinar ele de forma alguma. Eu estou regulando com uma volta e mais um pouquinho nas entradas de ar e combustível. E percebi que esta dando mais de uma volta para regular. Poderia me dar uma dica? Abraços!
@johnheady89839 жыл бұрын
what is ph number for tillotson direct have question about engine carbaration on ultralight aircraft
@charlesdemirjian7429 жыл бұрын
John Heady It's an Irish number: +353667162500. It might be easier to email [email protected] with the question.
@speedracer192310 жыл бұрын
Great video! I would love to see a video on tuning the carb
@alldowntheline314610 жыл бұрын
Is there a guide somewhere online for small engine Tillotson's? I have two vintage Tillotsons on Lauson Tecumseh engines from the early 60's and I cant find a thing about them so I can rebuild or at least clean them up properly . They are stamped E7A and E8A.
@charlesdemirjian7429 жыл бұрын
AllDown TheLine Sorry for the late post, but in case you haven't figured it out yet, I will post on the Tillotson.ie webstie (tillotson.ie/techinfo-service.php) the the Illustrated Parts List for the E series carbs that has all the parts and some tuning instructions. The parts are going to be hard to find, but there are some good resources in the US (try vepetersen.com for vintage original party or thecarburetorshop.com for aftermarket) and if you stil have trouble, you can try sending it into the factory in Ireland. We can usually repair most older carbs if the body is still in good shape. Contact [email protected] for more info.
@mercnut111 жыл бұрын
Where can you buy in usa
@mercnut111 жыл бұрын
Where can you buy from tilliston in usa
@Tillotsoncarburetors11 жыл бұрын
Not sure what you mean by diaphragm return spring, but inlet lever springs are available from dealers or through tillotson.ie in RK kits or separately. If that's not what you are looking for, check the exploded diagram in the Parts List for your carb model (available in the Service section of the tillotson,ie website) and contact a dealer or [email protected] to order.
@k4rtm4n5412 жыл бұрын
your ring pressures are too low, so the needle valve can't close correctly, that's why the fuel comes out of your barb ! Sorry for my bad english i'm french ! frenchs make best carburators =)
@VideosModellbau12 жыл бұрын
Very nice, good explained and very useful video! Thank you very much!
@sasop11712 жыл бұрын
I lost the diaphragm return spring on a carb, is there any way I can get a spring included with a tillotson gasket and hardwear kit? Any advise is appreciated. Thanks Sean.
@northerbrewer13 жыл бұрын
Soak gaskets in Gasoline? Just a sugestion but would mineral spirits not be a lot safer with the same results.
@normanwells27557 жыл бұрын
1:13
@PowerModzOfficial13 жыл бұрын
For the most comprehensive tilly carb rebuild for your old snowmobile HR/HD types, go to my video and watch, I do a complete tear down and rebuild - everything is done. Thanks Tilly!