Just bought me one , they just lowered the price from $79.99 to $59.99.
@SpangsWorld3 күн бұрын
Oh sweet. I just used mine today again to get the lawnmower started.
@bingobandit3 күн бұрын
Great vid. I'm getting ready to do mine. I see the torque spec is 200 to 225 ft lbs. I will keep looking as you said 160 ft lbs. One tip for others is wrap the U joint with electrical tape to keep the caps and bearings in place.
@SpangsWorld2 күн бұрын
It's been like 9 months since I changed it and everything seems good still. I'll probably pull it off before our big trip in a couple of weeks and check it again. Good tip with the electrical tape. Thanks.
@bingobandit22 сағат бұрын
@@SpangsWorld Thanks for getting back. I have seen more than one video where the torque from 160 up to 200, that's what's confusing to me. I just googled it many sources say 200 to 225, but on some forums, it's 160 to 200. That's pretty tight 160lb, I would guess it's plenty.
@user-mw7ul1le7y9 күн бұрын
Do you have to have the harness byPass plug in order for this to work you have to push my brake extremely hard for it to work
@SpangsWorld8 күн бұрын
Not sure. I have had the bypass in basically since I had the machine.
@kurtburkhardt586212 күн бұрын
We have been to Badlands with our 4X4 group. It's not Moab, but has lots of interesting terrain and is a good challenge for being in the Midwest.
@SpangsWorld12 күн бұрын
Yeah I always say it's got a little bit of everything.
@GrandpaG177614 күн бұрын
Let's go Spangs!!!!!!!!
@SpangsWorld14 күн бұрын
🤙🤙🤙
@brianmiller851314 күн бұрын
Nice shots. Making me want a roof decal with the drone at the wall
@SpangsWorld14 күн бұрын
Thanks. That would make it easy to spot
@JeepsLimited14 күн бұрын
3:49 someone needs to teach the guy in the badass 2 door JK how to drive.
@SpangsWorld14 күн бұрын
He never listens!
@AdventuresOfRogersAndHenderson15 күн бұрын
GREAT video man!!! It was a fun day!!!
@SpangsWorld15 күн бұрын
Thanks. 🤙
@dxraaaaa18 күн бұрын
Costco is selling it for $80
@SpangsWorld16 күн бұрын
Oh really now that's a deal.
@zachscott260419 күн бұрын
Wow, like a whole foot of ledge😂
@brandonmcdougall705921 күн бұрын
Pretty sure my car could to
@SpangsWorld20 күн бұрын
The drone video makes it look more flat. Only one way to find out 😁
@AdventuresOfRogersAndHenderson22 күн бұрын
Someone should tell that guy to wash it! Sheeesh!
@SpangsWorld21 күн бұрын
🤣🤣🤣🤣🫣
@AdventuresOfRogersAndHenderson24 күн бұрын
🤘🤘🤘
@SpangsWorld20 күн бұрын
🤙🤙🤙
@julienpenaruizАй бұрын
How did you reset the code with out driving it?
@WindsofChange2112Ай бұрын
You just lost your 10mm. I heard it hit the floor lol. I got the 3 piece a few months ago. They are awesome.
@SpangsWorldАй бұрын
Haha yeah that's what rolled off the table and gone. 🤣🤣
@JayCharland-lg5bzАй бұрын
Keeps have weak ass axles go 1 tons
@SpangsWorldАй бұрын
One day tons will be added.
@JeepsLimited23 күн бұрын
That particular jeep has a 14 bolt rear and dana 60 front.
@childofGod11112 ай бұрын
Excuse me, Sir....your American flag is hung wrong. When the Flag is displayed vertically the Stars are to be over your left shoulder as you look at it.
@SpangsWorld2 ай бұрын
Thanks for the correction will fix it.
@supermccnasty41762 ай бұрын
I make the hard tops at my job every day for those.
@SpangsWorld2 ай бұрын
Oh that's cool.
@404_profile_not_found2 ай бұрын
Kids helped "rebuild" an engine. I found random sockets put in each of the exhaust ports on the block after coming back from lunch
@SpangsWorld2 ай бұрын
Oh man good thing it was just socks.
@AdventuresOfRogersAndHenderson2 ай бұрын
🤘
@SpangsWorld2 ай бұрын
🤙
@AdventuresOfRogersAndHenderson2 ай бұрын
lmfao
@SpangsWorld2 ай бұрын
When I was editing and saw that I died laughing.
@homeslicegamer95562 ай бұрын
would it cause the fuel pump not to kick on when you first turn
@SpangsWorld2 ай бұрын
Not sure if it would cause the fuel pump not to work. If it's still cranking when starting there is probably a different problem.
@JeepsLimited2 ай бұрын
That guy probably ate plenty of crayons and paint chips in his younger days.
@SpangsWorld2 ай бұрын
You might be right 😂
@barry84583 ай бұрын
Being recommended 35 PSI..it’s probably a radial and it shouldn’t be run that low PSI..radials don’t have sufficient sidewall beef to do that and not designed for it…you want to go low get BIAS ply…learn your tires !
@regulator11753 ай бұрын
Is the rear sway still hooked up?
@SpangsWorld3 ай бұрын
Not sure on his. It might be.
@_ltor3 ай бұрын
Yea, they are swayloc dual rate bars front and rear
@one4x4nut3 ай бұрын
Glad I wasn't the only one that couldn't make that climb at the 1:00 mark that day..haha
@SpangsWorld3 ай бұрын
He tried like 10 times just couldn't get the front tires over the top to bite. I don't remember if the green buggy that was running around doing the walls did that one while we were there.
@one4x4nut3 ай бұрын
@@SpangsWorld same..haha and yeah he made it, he’s on stickies but said the trick is taking the left side.
@kourtneywhitt68123 ай бұрын
I think I tripped on that same tree stump! Stubbed the heck out of my toe!
@SpangsWorld3 ай бұрын
That root is taking out everyone lol.
@AdventuresOfRogersAndHenderson3 ай бұрын
23:15 hard lines good times!
@AdventuresOfRogersAndHenderson3 ай бұрын
16:15 WHAT DA HECK! Damn tree roots
@SpangsWorld3 ай бұрын
Lol. Think jeeps limited has it from his view. Probably not as graceful of a fall as I think it is. 😂
@AdventuresOfRogersAndHenderson3 ай бұрын
@@SpangsWorld lol we’re never as graceful as we’d hope
@AdventuresOfRogersAndHenderson3 ай бұрын
10:40 everybody gets it wrong, lol don’t feel bad! we could’ve picked a more catchy name 😂
@SpangsWorld3 ай бұрын
I'll have it right in my head for the most part at first then I am like that's not it is it. I'll put a sticky note on the dash for it next time 😂
@AdventuresOfRogersAndHenderson3 ай бұрын
@@SpangsWorld lmfao sticky note works!
@AdventuresOfRogersAndHenderson3 ай бұрын
7:45 I wondered where yall went 😂
@SpangsWorld3 ай бұрын
Them rocks were out to get us.
@AdventuresOfRogersAndHenderson3 ай бұрын
Duuuude… your shop is freaking SPACIOUS!!!!
@SpangsWorld3 ай бұрын
It's got some room. Needs insulation and some heat.
@tsetendorjee90404 ай бұрын
Thanks for sharing your Battery !!!
@SpangsWorld3 ай бұрын
No problem 👍
@coltonware56274 ай бұрын
Sidewall MAX PSI ratings on ATVs or Automobiles are never suggested PSI ratings except for Bias Trailer tires. MAX PSI is exactly as it claims, the maximum PSI that should be put into the tire and most often it’s for setting the bead. Always follow what your vehicle’s door jam states for tire pressure as they’re taking into account the weight and load rating of the vehicle.. the tire manufacturer doesn’t know what the tire is going on so they can only list the maximum allowed tire pressure to be put inside their tire for safety reasons.
@SpangsWorld4 ай бұрын
Thanks for the info.
@AdventuresOfRogersAndHenderson4 ай бұрын
😂😂😂
@imjustbino4 ай бұрын
lol
@TrailBossGarage4 ай бұрын
2:14 you said if you pull the harnesses out? seat harness? im chasing wires and plug on mine and have a plug like that but noting in it. what was originally plugged in?
@SpangsWorld4 ай бұрын
For the seat plug it should be a sensor for if your seat belt is buckled or not. If it's unplugged or your seat belt isn't buckled you shouldn't be able to go over 15 MPH.
@HoldMyBeerJeeping4 ай бұрын
How much torque did you put in that pinion nut? Thanks for the video!
@SpangsWorld4 ай бұрын
I went with 160# from the info I found.
@HoldMyBeerJeeping4 ай бұрын
@@SpangsWorld thanks! That’s what I found also. The torque specs were different for used versus new.
@SpangsWorld4 ай бұрын
@@HoldMyBeerJeeping yeah think I saw as low as 135 and as high as 225. As far as I can tell haven't had a problem with it yet.
@HoldMyBeerJeeping4 ай бұрын
@@SpangsWorld well thanks to your video man. I changed mine out yesterday. Worked like a charm! I had one hiccup with the needle bearings in the u joint but for that sorted out. Those caps come off easier than I thought!
@SpangsWorld4 ай бұрын
@@HoldMyBeerJeeping glad it helped.
@chadjohnson28534 ай бұрын
It’s warm in there !! I have pulled dead ones out of the fan shroud more that once. 😢
@austingibson64284 ай бұрын
Your tire wear pattern is horrendous
@SpangsWorld4 ай бұрын
Yeah it is the new ones are still sitting in the shop. Haven't mounted them yet.
@iandungan61964 ай бұрын
Keep them rats out of that wiring harness for sure
@anthonyjames16234 ай бұрын
Thank you for being a kind person
@mrcovarrubias844 ай бұрын
I was expecting a Hellcat swap or something wild, hahah!
@SpangsWorld4 ай бұрын
That would be way cooler for sure. Maybe next time.
@AdventuresOfRogersAndHenderson5 ай бұрын
Nailed it GOOD!
@basquo25 ай бұрын
They're good, but problematic.
@SpangsWorld5 ай бұрын
Yes they are. Just ignore the lights on the dash.
@user-ox9fo3wx1d5 ай бұрын
Nah you know you can't scare him no more or you might end up like the computer 💀
@BareBackBroncos5 ай бұрын
That first climb is awesome!
@SpangsWorld5 ай бұрын
It really is!
@meshajackson9726 ай бұрын
So very helpful thanks I have one and just had to be on KZbin to make sure when I use it I'm using it correctly