Mr Jay

Пікірлер

@azuenalmelendezfernandez7857 10 күн бұрын

Ola estas regando la moto o estas bendiendo

@Ilikebaseball770 25 күн бұрын

How tall are you

@MrJeffharper47 25 күн бұрын

@@Ilikebaseball770 6ft 3in. Why do you ask? Lol

@ApexAlex97 26 күн бұрын

I’m getting a state 2 not applied on mine, what code is that?

@MrJeffharper47 26 күн бұрын

@@ApexAlex97 you need to set the counterweight position. I explain it early in the video

@MrJeffharper47 26 күн бұрын

@@ApexAlex97 “state 2” is referring to the outrigger status you have set in the computer. Basically the computer is recognizing something is “wrong“ because you have the computer thinking you’re on the outriggers but you actually have the outriggers sucked in. For instance, if you have the out rigger set up and you try to suck everything in it *should* Start sounding the buzzer because it detects a change. Granted, sometimes it automatically changes the state of the outriggers and sometimes it doesn’t. Sometimes I can suck everything in and start traveling without having to touch the computer, and sometimes I have to manually tell it otherwise.

@ApexAlex97 26 күн бұрын

@@MrJeffharper47 got it thank you very much! Also one final thing, on my chart here on the computer, it’s marking its weight in decimals such as klbs 21.8 and max klbs is 41.9 is that just a multiplication of what those numbers are by 10?

@MrJeffharper47 26 күн бұрын

@@ApexAlex97 no, that’s multiplying it by 1000lbs. So 21.8 Klbs = 21,800 lbs

@ApexAlex97 26 күн бұрын

@@MrJeffharper47 got ya! Thank you!

@soklee9782 Ай бұрын

Hqszz

@jasonbell1698 Ай бұрын

thanks a lot. we use these cranes for 777 main landing gear changes and the company just got a newer 530 with this system. completely different than the older 530 we had

@TheRealRyebred 2 ай бұрын

I got in one yesterday after running tower for 10 years and just wanted to be sure about running out the other boom sections. Thank you.

@gilbertcavazos6541 2 ай бұрын

Thanks

@briancampana6014 2 ай бұрын

do the tadono's all scream like that? i run yellow cranes and they for the most part won't squawk until 90. and will you gain cap putting more boom out?

@MrJeffharper47 2 ай бұрын

@@briancampana6014 I had it at 99-100% so yeah, it was screaming.

@Mikemaxbros 2 ай бұрын

So anything over 75% you let them know? And do not lift

@MrJeffharper47 2 ай бұрын

@@Mikemaxbros yeah, if we had to exceed 75% of the cranes lift chart we had to do a critical lift form that involved safety and supervision. Theyre almost always denied. That company was super gay about It

@Mikemaxbros 2 ай бұрын

@@MrJeffharper47 10/4. I know hear the refineries definitely enforce it, but not so sure with other companies. Safety always gets thrown out the window it seems like. Always comes down to the operator though. Im new to RT cranes, been operating Tower cranes for 9 years. So much to learn on these cranes your videos are epic man. Thank you very much. Trying to lean the newer LMI ‘s. You’re a great Operator.

@MrJeffharper47 2 ай бұрын

@@Mikemaxbros thanks brother. When I started running these cranes I found there was virtually no information on the LMI’s or any guides on how to set them up. So i decided to make some tutorials to help out. I also try to make videos of real time operating while I’m explaining my thought processes of what/why I’m doing what I’m doing.

@Mikemaxbros 2 ай бұрын

@@MrJeffharper47 Yeah bro 100% no information other then doing the buddy system to help. Stressing out what crane I’m getting next out of the union hall lol. I’m definitely trying to avoid Looking like a donkey trying to figure the crane out for 2 hours. Your real time operating goes a long long ways bro. I’ll be watching and studying your videos. Thanks again Jeff!

@John-v4i 2 ай бұрын

@@Mikemaxbrosalways better to take a few hours and look new than to lose days because you wanted to look good. I always tell my crew on a new job to give me a few minutes to read the book. Stay safe out there brotha 🤘🏼

@flightnavigator8999 2 ай бұрын

When I operated cranes in the 80’s and 90’s there was no computers in them last year I started operating hydraulic RT Tadano, Grove and I had to get an operator to help me understand this computer, they thought I couldn’t operate the damn crane 😢, embarrassing 🙈, once he set the computer up and half way explained it I was ready to operate but there is sooo much more to learn about the LMI and no school I’ve been to teaches you about the most important part of the crane to me. I was used to friction cranes with live booms and 36 yard clamshell buckets etc. loading and unloading ships and now the chemical plants now. Fixing to go back and start at it again it’s been 8 months since I was laid off and now I’m back nervous again.

@Mikemaxbros 2 ай бұрын

I just got off a 1980’s. Grove RT yeah no LMI on it

@flightnavigator8999 2 ай бұрын

Lol, thank you 😅. You are right ✅👍🏼boom up ⬆️

@ZoeeBunghai 3 ай бұрын

Good

@uncle705 3 ай бұрын

Good point on remembering radius. I use dry erase pens on the window on my right. Shitters, dumpster, ect. Flying bar. Truck ect.

@uncle705 3 ай бұрын

Decal works did my wraps on my CR & CRF's.

@uncle705 3 ай бұрын

Im into moto also. Shocked when i got on yur page. 😂

@uncle705 3 ай бұрын

Found the split screen set up. Thanks.

@uncle705 3 ай бұрын

Definitely upgrade from the GR-1000XL im running. 100ton. The touch screen in yurs. Override switch still press and hole to use? Use it when getting ready to load up on low bow. The A-B kicks out under 4' of boom angle. Do you have a grove split screen tutorial? Grove brought 1 out for a couple days to demonstrate while i was on vacation. You can never be 2 informed. I haven't ran a grove in about 8yrs.

@szymong366 3 ай бұрын

how did you move your fame points position?

@StickellsPlaysNow 4 ай бұрын

Do they have a track for 50s/ kids as well?

@MrJeffharper47 4 ай бұрын

Yes, there is a very small track for kids

@hilux22re 4 ай бұрын

Where is the bypass??

@briancampana6014 2 ай бұрын

behind the seat to your left.... "im god mode Engaged". lol

@hilux22re 4 ай бұрын

Good tutorial!

@juanalvarado3988 4 ай бұрын

To turn off a winch you turn it off through the computer?

@hilux22re 4 ай бұрын

I ran 90T tadano and it does not have a winch lockout , just for swing

@uncle705 3 ай бұрын

That's what is nice about Grove and link belt. You can shut off a given winch so ya don't suck it up by accident.

@juanalvarado3988 5 ай бұрын

Are all tadano levers and not joysticks?

@MrJeffharper47 5 ай бұрын

I’ve run a handle full of tadanos and ive never seen joysticks on them.

@juanalvarado3988 5 ай бұрын

Is the computer on an 80ton the same

@MrJeffharper47 5 ай бұрын

If it’s the newer “XLL-4” it should be basically identical. The older generation Tadano’s are a little different as they use a different computer etc.

@juanalvarado3988 5 ай бұрын

Company just picked up a new GB 800XL 2 ... hopefully it's easy on getting used to it

@MrJeffharper47 5 ай бұрын

@@juanalvarado3988 if you’ve never run a tadano you’re going to love it.

@hilux22re 4 ай бұрын

Its easier

@mr.channel6467 5 ай бұрын

😂

@zectorjk8975 5 ай бұрын

I'm sorry for what happened man, did you break any bone?

@MrJeffharper47 5 ай бұрын

Nope! Just some bruising on my leg and hip. Bike is fine too

@zectorjk8975 5 ай бұрын

@@MrJeffharper47 Be safe man 🤜

@JamesSmith-gh3xd 5 ай бұрын

Sounds like it knocked the breath outcha!

@GoonMoto 5 ай бұрын

Oh dude getting the wind knocked out of you is the worst. Hope your good.

@MrJeffharper47 5 ай бұрын

Got some sweet bruises but I’m fine

@GoonMoto 5 ай бұрын

@@MrJeffharper47 Oh they are just proof you had fun 😂 Glad your OK

@joshuadowling8778 5 ай бұрын

Damn. I didn't even know they made a 60. My buddy had a KDX 80. That thing was waaaay too fast for an 80.

@MrJeffharper47 5 ай бұрын

The KX60 rips too!

@adamrochester1 5 ай бұрын

lol …. Before you attack people make sure you can ride buddy I’m heavy as fuck and still hit the 80-100 footers

@MrJeffharper47 5 ай бұрын

What? There were like 10 kids on 50’s and 60’s and they were falling all day. Didn’t want to land on them

@nicktorr7888 6 ай бұрын

Heck yeah thanks

@khanadil3205 6 ай бұрын

Thank you very much brother for very informative video it will help me and my friends very much in the future I will share it with all my friends From Saudi Arabia

@whoisantonioxx_313 6 ай бұрын

En cuanto me dejas la moto estuviera bien unos 1000€ euros 💶

@MrJeffharper47 6 ай бұрын

I don’t speak Spanish

@Ilikebaseball770 25 күн бұрын

He offered to buy your bike for 1000 euros

@Southie24 6 ай бұрын

i can't believe all the you tube operators we have now i fault social media and cco from going from non profit to profit even though they say they are non profit there's way too many operators now something going on went from best kept secrete to this new generation.

@MrJeffharper47 6 ай бұрын

You’re an idiot lol

@biggtiidacraneguy 6 ай бұрын

You missed the tilt cab switch...😊

@statethis 6 ай бұрын

14m21s

@hilux22re 2 ай бұрын

Its above the right window

@riggingcranetips7393 7 ай бұрын

nice

@thomaslimba934 8 ай бұрын

Great explanation

@adriantowe278 8 ай бұрын

I love that bike it takes me back to my childhood love and respect from England

@tommymejia8244 9 ай бұрын

Mr Jay: Great video. I just got assigned to that very model of Tadano, (GR-1000 XXL-4). Thanks for the tutuorial, it helped a lot. Keep those videos coming.

@MrJeffharper47 9 ай бұрын

You’re very welcome, brother. I got tired of there not being many set up videos so I made these for everyone. Also, they’re for me in case I forget lol

@raulrocha1410 8 ай бұрын

Hey brother so I got the jib erected. I’m only able to throw out 135.8 (not a true 136) how would I be able to run everything else out? Do I need to switch booms mods to run the first section out? Dont necessarily need it, but it’s that what if question

@MrJeffharper47 8 ай бұрын

@@raulrocha1410 there’s a button on the “boom telescope lever.” when you’re scoping the boom out, once it gets to 130 or so feet it will stop until you press that button. Once you press that button the boom will continue to scope out.

@stevemacca786 8 ай бұрын

@@raulrocha1410it would be out all the way, you would have felt it go clunk. The boom length indicator needs a little calibration is all.

@tommymejia8244 8 ай бұрын

@raulrocha1410 Yes, there's a button on the whip line lever. Press that button, you should be able to scope out from there

@Ericsecom 9 ай бұрын

can u explain how u got the shift forks in place mine seem to be out of line?

@MrJeffharper47 9 ай бұрын

The shift forks should fit snug in the hole.

@Ericsecom 9 ай бұрын

@@MrJeffharper47 I can only get two in at a time and the other one won’t go

@MrJeffharper47 9 ай бұрын

@@Ericsecom I’m not exactly sure we’re talking about the same thing.

@Ericsecom 9 ай бұрын

@@MrJeffharper47the part where u have the zip ties on the transmission those little fort things that go on the gears

@MrJeffharper47 9 ай бұрын

@@Ericsecom you’re talking about the two rods that go into the holes, right?

@pierrebikelifetv9832 9 ай бұрын

Nice work

@kiii-real9919 10 ай бұрын

There is a Sepcter in the shadows

@ydkma 10 ай бұрын

Sounds mIIIIIIIIIIt

@hashammani6195 Жыл бұрын

👌

@JamesSmith-gh3xd Жыл бұрын

You’re annoying I called you earlier

@elciolima4610 Жыл бұрын

how did you remove the hud

@MrJeffharper47 Жыл бұрын

There’s a keybind for it

@wylmaestrin9980 Жыл бұрын

😇 "Promo SM"

@jeremiahgrayest Жыл бұрын

sick!

@MrJeffharper47 Жыл бұрын

For real!!

@TheProfessionalGamerSS4444 Жыл бұрын

I know you aren't a developer so you have no control over this, but "communicate well" is what bothers me most about the game as I don't have third party voips to use with random players so I need in game voice chat and since it's proximity, even to your partner, I can't coordinate anything. Side question though, what is your FOV for Spectre and Reaper? It seems different than default.

@MrJeffharper47 Жыл бұрын

Agreed. They’re literally working around the clock to fix everything.

@MrJeffharper47 Жыл бұрын

I play on 3440x1440 with the FOV set to 120

@sugs0377 Жыл бұрын

Hoe good is this game?

@MrJeffharper47 Жыл бұрын

See for yourself!

@pyrobiyt1577 Жыл бұрын

Super excited to see this hit early access, and even more chuffed for the developers to have persevered after their burnout and get this to this point, well done guys. PS. Amazing videos are you part of the dev team?

@MrJeffharper47 Жыл бұрын

I’m glad you liked the video! Have you been playing it lately? The response time from the developers in the Offical discord is unreal. I’ve been a long time play tester and my name is in the credits.

Ең жақсы KZbin

Пікірлер