Пікірлер
@dell74877 Ай бұрын
Does your hi-hat move around when you use the pedal and strike it? I just started setting it up again and it does this 🤣😭
@arrashobbycorner Ай бұрын
Hey, I have everything on a thick carpet, so it doesn't slip :/ make sure it only stands on the rubber feet and the middle section doesn't touch the floor
@kalideals 3 ай бұрын
Kidding me
@martinandersson3806 4 ай бұрын
Thank you! Looks great! I will try this method in a m109 build.
@RESlusher 7 ай бұрын
Fantastic work! I found this video looking for how to make Hesco barriers and now I'm thinking I might have to upgrade to use some LEDs!
@RESlusher 7 ай бұрын
Any chance you remember where it was that you bought those LEDs and holders? :)
@bridge9177 8 ай бұрын
A bit of explanation woukd be helpful for beginners like me.
@arrashobbycorner 8 ай бұрын
Hello, I have tried to write as much as possible in the subtitles in the short time available. You can see most of what is done in the video. Perhaps not everything is explained in this video because it is part 2 of the video.
@bahtis1 Жыл бұрын
Hı guys..is there anybody to do specilazing Pad Tones saving in any MY Kit 1 vs 60
@ferdinandkreuter1026 Жыл бұрын
Habe ein Fame DD One....aber ich finde in EZ 2 kein Midi Set Up für das Fame! Alles mögliche ist da,,,nur kein Fame! Was soll ich da auswählen? Danke LG
@arrashobbycorner Жыл бұрын
Huhu. Im EZ Drummer einfach das Konkurrenzprodukt "Millenium" auswählen. Klappt bei mir wunderbar und man kann dann auch die Midi Noten im Modul wechseln (wenn man will). Gruß
@ferdinandkreuter1026 Жыл бұрын
@@arrashobbycorner Ah super. Danke! Wie hast du den die Einstellungen der HH eingestellt...das scheint ja der Knackpunkt zu sein! Ich kann doch hoffentlich die Feinjustierung am EZ3 vornehmen, oder? Diese Funktion soll ja super sein! Gibt es ein Video, welches die Anbindung von einem DD one erklärt oder ist das Allgemienwissen?? Vielen Dank!
@arrashobbycorner Жыл бұрын
@@ferdinandkreuter1026 Also ich habe das Feintunig im Modul selber gemacht. Was mir aufgefallen ist, das man ein wenig mehr abstand zwischen Trigger und Pad lassen sollte. Da das Gewicht das Pad weiter nach unten drückt, und der trigger nicht richtig arbeiten kann. Zum Video kann ich nichts sagen, habe es von anfang an so gemacht wie oben beschrieben. Gruß
@user-xo7xy4oi2i Жыл бұрын
Hi habe mir das teil auch bestellt bis jetzt ist nur das paket mit den Rack, dem kick pedal und der hi hat da nur wollte Ich fragen im welchen der pakete der Schlüssek zum montieren des racks ist ob der in dem paket mit den pads oder mit dem Gerüst drinne ist weil ich den irgendwie nicht finde😅
@arrashobbycorner Жыл бұрын
Huhu. Der Schlüssel ist ein normaler Drumkey/Stimmschlüssel für´s Schlagzeug, da kannst du irgendeinen nehmen wenn du einen hast. In einer der anderen Kisten ist eine Box wo Kabel Modul und Anleitung drin ist. Da müstte auch ein Schlüssel drin sein. Komisch das nicht alle Kisten auf einmal gekommen sind. Hoffe da kommt bald bei dir an :)
@jamesbrown8780 Жыл бұрын
Get some nips!
@thomaslier6906 Жыл бұрын
Hervorragende Basteltipps....
@викторалексеенко-щ5ф Жыл бұрын
Да-а-а, как говорят у летчиков высший пилотаж... Браво ...
@викторалексеенко-щ5ф Жыл бұрын
Здорово получилось, я бывал в тех местах, почти сорок лет назад...
@викторалексеенко-щ5ф Жыл бұрын
Шикарная работа. Очень понравилось. У меня такая же модель, не знал какую диораму сделать. Теперь такую же работу выполню, очень красиво. Спасибо большое за идею. Лайк и подписка...
@arrashobbycorner Жыл бұрын
Спасибо, что понравилось. (переведено с DeepL)
@Mechabang Жыл бұрын
I bought both the Madcat and Warhammer mechs recently and they're my first metal models to work on. This video is very useful for me, since I didn't know where to start!
@alexandrefernandesFN88 Жыл бұрын
Parabéns !! Ficou perfeito!!!
@arrashobbycorner Жыл бұрын
muito obrigado :)
@ФилиппЖёлтиков Жыл бұрын
Can you tell me how much space the unit takes up? In meters, please.
@arrashobbycorner Жыл бұрын
Hey, my kit fits on a small rug. 1.4m x 0.80m. In front of it stands the stool. Greetings
@ФилиппЖёлтиков Жыл бұрын
@@arrashobbycorner thank you for answer and video. When i look at the foto it seems so huge)
@kill4beans259 Жыл бұрын
Nach genau soetwas habe ich gesucht fantastischer Job richtig edel 🤟
@BunBunBlair 2 жыл бұрын
Thank you for this!! I just got my first Warhammer starter set with about 20 figures to paint and I'm so excited to use these!!
@MSGSlayer1 2 жыл бұрын
But which spice do you prefer?
@arrashobbycorner 2 жыл бұрын
So I recommend to taste, a little curry and hot paprika spice then a pinch of salt
@BunBunBlair 2 жыл бұрын
I heard the spice Melange is great, very valuable stuff
@noggin9306 2 жыл бұрын
good content
@simonfaure9694 2 жыл бұрын
Fab work you have a lot of talent Happy New Year
@simonfaure9694 2 жыл бұрын
Ahhhn that's how you made them .....fab simple effective and cheap
@simonfaure9694 2 жыл бұрын
Fab painting great tutorial I will be adding in the Ukrainian theme as Norway and Germany have donated them to that army.
@simonfaure9694 2 жыл бұрын
Please can I ask where or what shell did you make or buy please I am essentially copying your shell firing work expect mine will be in a town/field setting in a Ukraine war diorama
@simonfaure9694 2 жыл бұрын
Just got this today as my Christmas pressie from the wife cannot wait to build it over the next few days
@arrashobbycorner 2 жыл бұрын
Merry christmas :)
@simonfaure9694 2 жыл бұрын
@@arrashobbycorner I wondered if you can tell me what you made those round handles from and how to do you attached the models to them with magnets or simply blue tack?
@jakobfabijan2748 2 жыл бұрын
Very cool, where did you get the paint airbrush
@arrashobbycorner 2 жыл бұрын
Hi, i mixed it myself. A mix of Dark Yellow and White for the base color
@JazzVisionsMusic 2 жыл бұрын
Knapp 2 Jahre nach Deinem wirklich tollen Unboxing inkl. kurzem Test und hilfreichen Extra-Tipps habe ich mir das Teil auch geholt. Allerdings ist es leider teurer geworden. Regulärer Preis ist nun 888,- und im Black Friday habe ich es für 699,- bekommen. Es gibt jedoch Neuigkeiten bei diesem Set. Denn inzwischen hat der Music Store professional die Kundenkritiken hinsichtlich der Doppeltrigger beim Kickpad ernst genommen und dieses Problem behoben. Es wurde ein Kickpad-Upgrade integriert, in Form eines kleinen zusätzlichen Gummipads, welches man im Kickpad angebracht hat. Zudem gab es ein Software-Update für das Triggerverhalten mit dem neuen Gummipad. Löblich, löblich. Kann man ja nicht unbedingt erwarten, bei einem Low Budget Set. Jedenfalls nochmals vielen Dank, Dein Video war sehr hilfreich. Guten Groove, weiterhin!
@arrashobbycorner 2 жыл бұрын
Freut mich das das Video dir geholfen hat :) Ja das Set macht immernoch Spaß und funktioniert ohne Mucken mit EZ Drummer. Das mit dem Kickpad habe ich gar nicht mitbekommen. Und ich finde leider nicht, ob man das Gummi nachbestellen kann oder nicht. Wenn nicht wäre das echt ne Schweinerei :O Ich werde dort morgen mal anrufen und nach fragen. Grüße
@lamecake3124 2 жыл бұрын
Nice firsat Video!
@PlanetCalm 2 жыл бұрын
Top Danke für das tolle Video.
@ScaleMilitaryModels 2 жыл бұрын
Amazing job! It looks excellent! Subbed!
@mikequandt7724 2 жыл бұрын
Nicely done my friend
@STWLandO 2 жыл бұрын
For the amount of views and subscribers, your production is awesome!
@arrashobbycorner 2 жыл бұрын
Hey thank you :) There will be more soon, unfortunately I have to take a little break. Hopefully I'll have something new soon.
@lesthiele4921 2 жыл бұрын
I have just discovered your channel and will subscribe, you have done a fantastic job on the PZ 2000, my only concern is the wsy manufacturers let these kits leave the factory/ manufacturing plant with all these heavy mold lines, in this day and age it should NOT be happing, take care and keep safe, best regards from Australia
@arrashobbycorner 2 жыл бұрын
Hey. Glad you like it. Yes, Revell sometimes has a problem with the casting. Here it was a lot of work to remove everything. Thank you. Have a nice day
@giuseppinafranceschini4116 2 жыл бұрын
Ok il prezzo, grazie
@welpseeyoulater 2 жыл бұрын
Love everything about this video 😍
@dennishill2343 3 жыл бұрын
I would like to ask about the glue you use, when I was a kid you had to be very careful to keep glue off external surfaces because it would ruin the surface. I have watched a few videos of tank construction and it seems like people just put the parts together and grab the brush and paint the glue on. Does this glue today not ruin the surface or since it's a tank and will be painted later, the paint will cover the dried glue up.
@arrashobbycorner 3 жыл бұрын
Hello, yes you can ruin the surface with glue. The most important thing is to let the glue dry fully. don't try to wipe it off, it will only make it worse! Later you can sand it away with sandpaper. In the video I use Revell Contact cement, which is thick and easy to apply with the tip. The glue that is applied with a brush is usually an Extra Thin glue from Tamyia or Ammo of Mig. The parts are usually held together and the glue is applied to the areas with the brush. Capillary forces cause the glue to flow into the smallest gaps. Extra Thin evaporates almost without leaving any residue, but you have to work fast because it evaporates quickly. After painting, the glue is no longer noticeable if you haven't applied too much. It's better to apply a little less glue and everything will be fine. Hope this helps :)
@wumao6797 3 жыл бұрын
I don't mind these type of tracks with 1/35 scale models but I really hate it when its done with 1/72 scale.
@patriziodrumcover 3 жыл бұрын
Mi spigate come registrare una cover con la chiavetta usb ? Io nn riesco grazie
@younglethaljun1470 3 жыл бұрын
Hi do you need specifik headphones for this kit? i recieved it today and used my JBL headphones like ive done with previous kits but it didt work and no sound came out but everything looks to work fine with the kit?
@arrashobbycorner 3 жыл бұрын
Hey. I only use one of those 30€ headphones, they work without any problems :/ Have you tried another pair? Some headphones need an amplifier, maybe the connection doesn't have enough power to handle it.
@younglethaljun1470 3 жыл бұрын
I orderd some headphones frome gear4music hope those work or else im gonna cry haha but thanks for the replie
@valimar7198 3 жыл бұрын
Happy New Year
@pierremorel9168 3 жыл бұрын
Happy new year🍾🍾🍾🍾🇧🇪
@sanyohohner8702 3 жыл бұрын
I wish us a better year in 2022
@lexxym.835 3 жыл бұрын
Happy New year! Bin schon gespannt auf nächstes Jahr :))
@arrashobbycorner 3 жыл бұрын
I wish u all a happy new year!
@markuzim9991 3 жыл бұрын
Viel Glück im neuem Jahr :)
@gerstone7515 3 жыл бұрын
Happy new year!
@СергейГрищенко-х6ш 3 жыл бұрын
Відео цікаве дякую. Хочу уточнить який потрібно брать розмір куба для 1/35 маштабу? Дякую за відповідь
@arrashobbycorner 3 жыл бұрын
(Текст создан с помощью переводчика) Спасибо за похвалу. Кубики на видео были сделаны для 1/35. 3 см х 3 см х 3 см. Приветствую вас
@СергейГрищенко-х6ш 3 жыл бұрын
@@arrashobbycorner дякую. Є бажання створить діораму на тему ато, опорний відділення з таким захистом або кп на дорозі. 🙂
@arrashobbycorner 3 жыл бұрын
@@СергейГрищенко-х6ш Это звучит как хороший проект :) Желаю вам получить массу удовольствия от этого
@ankyss 3 жыл бұрын
Hello, Next week I am off and are going to the musicstore. Do you think it will fit in a Skoda Citigo? What are the sizes of the boxes?
@arrashobbycorner 3 жыл бұрын
Hey. I don't know the car, unfortunately. But from the pictures it should fit? The big box is 76cmx60cmx40cm the other one is 120cmx50cmx20cm. but I also got my set by mail order. If you watch the video at the beginning, you can see everything that came with the set. Hope this helps you. Greetings
@petrsmith3889 3 жыл бұрын
Dear Arra´s Hobbycorner, I want to thank you for your help with tape. I bought it in czech eshop. Tape is the same princip like in video. I made 2 barriers for test, using your tutorial video - my god - super work. I spare a lot of time. Thank you, thank you, thank you so much, one more time ..., like modeler to modeler...
@arrashobbycorner 3 жыл бұрын
Hello :) I am glad that I could help you. Thank you that you like it. Mnohokrát děkuji
@petrsmith3889 3 жыл бұрын
Excellent modelling video. A tape "Tesa - glass fiber joint tape" - can I please more information about that. Description, product type number, eshop link? Thanks :-)
@arrashobbycorner 3 жыл бұрын
It was hard to find the english name for this tape^^ here is the ASIN number: B003A68F8U you can find this and other manufactures on amazon
@RESlusher 7 ай бұрын
Drywall Joint Tape. You can find it in any big-box home improvement store.
@Magmac1000 3 жыл бұрын
Hi, you are recommended this drum kit after few months Drumming ? I'm confused between Alesis Crimson and this one Thank you
@arrashobbycorner 3 жыл бұрын
Hello, so I am satisfied with the set. But I also use it via MIDI with EZDrummer2. The sounds are not very good. I also got it 30% cheaper back then. If you have the money and want some better module sounds I would get the Alesis.