What kind of socket nail 11mm 7/16 mm"""""" did u use

Thanks for the video. Ordered NOS OEM parts off ebay, amazon reviews stated the cheap parts dont last very long.

Thank you very much!!!

Thank you so much!!!!!

Thank you, this is great info.

you are spot on with this video, thank you for your mechanical mind. Just a note, my part to be replaced came off hard and new part was hard to put on. I pulled new part off that I only got on about 1/2 way and discovered that the old part had left hardened plastic in the ribs of the steel shaft. Scraped the ribs clean of the plastic added a bit of bees wax and slipped the new part on. Thanks again!!!!!!!

Thank you

You fixed my washer, Thank you!

Nice!

This ROCKS! Had the same error and couldn't find anything online about it. Appreciate you taking this step by step and also recommending needed tools at the start.

hey what if the agitator spends with the drum do you think that could still be the problem

Thank you! I did the repeated clean cycles to no avail. I almost gave Up until I saw your video. All others never said it could be the agitator. Thanks again!!

Thank you. Well done demo. This information was the fix for my 13 year old Bravos XL too.

As others have said, finding your video saved me +$800. Like you I tried everything I could find online to prevent the Sd error, short of pulling the tub. Was getting ready to order a new washer, sale expired in 2 days. Found your video, had parts from Amazon next day and a working washer that night. You're doing yeoman's work my friend. Thank you!!!

You saved my family a lot of money! I thought we would need to buy a new washing machine but then I stumbled on your video. Thank you so much!

Your my hero !

Great video. I have been in the repair industry since 1965 ... The spline on the agitator shaft must be cleaned so the drive hub goes completely down.. Or the new part will split 🪓🪓.. I didn't see you do that.. But great 👍 work.😊😊

Awesome video. I had gone to Lowe’s and ordered a new machine for $875 total. I found this video and ordered the part on Amazon for $13. Cancelled the order. Easy fix and saved me almost $1000. Thanks!

Thank you for your insight. I have exactly the same problem, a SD code, no suds, and the agitator rotates when the drum doesn't.

Great video. My friend has the sd error and I will use my vise grips to troubleshoot it! 😂🤙

Hello! I am currently in the process of trying to repair my bravos XL and I’m having an issue pulling the agitator up. Did you power off your washer or did you leave it on with the SD error flashing? I’m just wondering if my agitator is somehow locked into position because of the cycle it is currently on. And if that may be the case, how the heck do I get it to release? I hit the power button, but it hasn’t reset the cycle. I’m sure I would’ve heard it. Any help is appreciated!

Thank you sir! I've watched a couple of your videos and has saved me. I appreciate your videos.

Great video. I'm curious prior to SD fail was the spin cycle awfully LOUD?

DJ, thnx a mil for all the details and triage provided here. This was exactly the issue I had with the washer I recently repaired for a friend. Thnx for sharing the fruits of your research on this platform

Thank you!!

Thanks for your guidance. You been a huge help brother. Make it easy. God bless you my friend

This ! I was getting the run around til I found this ! Excellent video bro thank you !

Have the Sd code. Completely disassembled a 12yo washer at a rental property, cleaned the filter and entire washer, when putting it back together i noticed the stripped hub and ordered the part. Came here to make sure its the right solution to the code! Thanks!

Hey, seemed like I had the same exact problem. Changed the parts but now i keep getting a OL error code which means over load. Even when I run it empty I’m getting the OL. At least I got rid of the 5d code and drums seems to be fixed and doesn’t spin by hand like on your diagnostic test . Any more advice ?

Good afternoon, you have help me on the first one I did. I have had to replace 3 more times since Sept. of 2023. Alway the same problem, gears just worn down. It made no matter weather it was the maytag oem or knockoff. Are you having the issues that I Am? Can you think of anything why they are wearing out so quickly. Were retired and just the 2 of us. The steel spline shaft is pretty rusty, it's a bear to get off and on. I tried cleaning the best I could. Thanks.

after many hours of trying to run it thru and then taking the washing machine apart to clean it we still received the SD error. I decided to try the internet one more time and found this video. We just ordered the part. Praying this works! Thank you so much!

Your the MAN. Thx for the post!!

You just saved us hours and money! Glad I found this video! Go Tader!

I thank you. My wife REALLY thanks you! So easy once I was shown how.

Great video. I recommend cleaning the splines on the shaft really good. The cam needs to freely slide up and down on the splines. Thanks for the video.

In case that agitator is stuck, use a ratchet strap and a 4x4. I was lifting that thing up by the drum and it would not pop off. So, I got enough clearance between the drum and the agitator to get ratchet strap hooks in there, put 4x4 over top of the washer and put as much tension as I could without breaking the plastic, then kept tapping the middle of the agitator with a hammer. Finally popped loose. What a PIA .

Thank you. Best info EVER!

Thank you thank you thank you! I just fixed my washer myself for $17. When the dishwasher and washing machine crap out within 2 weeks of each other, i turned to youtube to help me diag and repair both of them. And while i have yet to fix the dishwasher, I have at least succeeded in fixing the washer. So thank you once again for helping me save hundreds of dollars! You have done us poor/cheap folk a kind service! ❤

This video is old, BUT THANK THE LORD I FOUND THIS!!! Ive been searching for TWO DAYS now for ANYTHING!!! Thanks man

Thank you! My son fixed it, thanks for your video!

You and tater are awesome techs thanks for the video. And thank you for your service 🍻👍🏼

thanks , very un handyman but me and my bulldog" Bubbles" watched your vid and fixed it :)

We're back in business, thank you! I have a Maytag Bravos XL, ~10 yrs old. As someone else mentioned, that middle plastic piece was difficult to remove and even more difficult to get new one on. I had to use a rubber mallet to work it down, but eventually got it

Thks. Fixed in no time. Straight forward step by step. Up and running

SUPER CHINGÓN !! , INCREIBLE QUE EL CODIGO DE ERROR NÓ DIGA NADA REFERENTE A ÉSTE PROBLEMA 👌👌

Bro Saved me 5 hrs of troubleshooting. I just checked and the agitator spins freely of the tub and won't spin to drain the suds. $10 and one day Amazon delivery later, I'm good to go. Did check the splines on the agitator and that's probably the next thing to fail, or the bearings again!

THANK YOU VERY MUCH I was going to buy a new washer tonght I found your Vidio and bang exact problem. Thanks again

Thank you, I am 62 years old and with your video I fixed my washer. Saludos from Tijuana Mexico

@onebaddj you did it again, how many years later now? 5!!! We had the same issue, somehow I found this video after hours of trying to solve the dumb SD false error issue. So, thank you thank you thank you! And yes, the one part was very hard to get on. I believe the metal piece it is supposed to slide over had either rust or just so much corroded dirt stuck to it that it made it almost impossible to get on. I lubed it up with a vaseline type gel I use for my pool repairs and had to use a pair of vice grips to set on top of it and then hammer the vice grips down until it got to the bottom. Very important to make sure the screws lineup first like you said. I did that and my holes were just a tad bit off, but when I put the first screw in they all lined up. Phew!!! I flipped over the big plastic agitator and it had so much junk/dirt and even black mold under it so I scrubbed the heck out of it with bleach. Ran a test after I reinstalled it and poof!!!! its working again yayyyy

Just fixed mine! Thank you Sir! You were right on. I blamed my wife for overloading it, haha