2 ай бұрын
3 ай бұрын
Пікірлер
@johnversluis3084 10 күн бұрын
Drew will resole and rebuild !! Franks boots won't rebuild Patriot boots just resole I have Drews Nicks Whites and Franks price on Drew just because the build in Mexico are the budget and they do make USA boots and they are $600 + US made drews
@clintbliss2046 11 күн бұрын
All the paint gone around the edge of your bar can be a lack of lubrication. It's getting hot.
@illnaturedsaws 11 күн бұрын
@@clintbliss2046 It’s a really old bar. The 400c doesn’t have the best oiler either. But it’s still true so I’ll keep using it until it breaks. haha
@clintbliss2046 11 күн бұрын
@illnaturedsaws I think there's a upgrade oiler for the long bar on a 400
@illnaturedsaws 10 күн бұрын
@ My bar gets plenty of oil. It’s just old and probably had the oil holes plugged a couple times when I was using it heavily. I widen all the oil holes on my bars. I also run it full throttle a few times before I start cutting to make sure the bar has oil. For how old the bar is and how much I’ve used it, the condition is surprisingly good. I switched to D&G bar and chain oil about 6 months ago and it’s made a huge difference on the life of my bars. My 32” Stihl bar has very little noticeable use on it and I’ve used that bar to cut timber out on the coast. The bar I’m using in this video was the second chainsaw bar I ever bought.
@Cooptn 15 күн бұрын
Many other videos show right after unboxing. Thanks for the honest review after use. Looking forward to getting some
@illnaturedsaws 15 күн бұрын
@@Cooptn Thanks for watching me ramble about them.
@stupiditypissesmeoff330 20 күн бұрын
Yeah be cool if they didn’t trash oem cylinders huh?
@justinblasovski2105 25 күн бұрын
IRONHORSE
@illnaturedsaws 25 күн бұрын
@@justinblasovski2105 Yesssirrr
@andders2477 26 күн бұрын
Would be nice with before and after spray to show how much more oil you get out. Should also mention it can be adjusted on many saws
@illnaturedsaws 26 күн бұрын
@andders2477 this only works for more oil with full adjustment.
@SkookumRanch-y3w Ай бұрын
Looks ez enough. Gives me an excuse to buy a real Dremel and not the cheap version. lol. Take care WD GlockandRoll.
@SkookumRanch-y3w Ай бұрын
Thanks bud. You in Idaho?
@illnaturedsaws Ай бұрын
@@SkookumRanch-y3w No problem that’s the reason I made this channel. Yes I am born and raised.
@SkookumRanch-y3w Ай бұрын
@ Got a buddy who was in Weippe and another up by Bonner’s Ferry. Also love McCall/ Burgdorff. Take care Don
@swere1240 2 ай бұрын
i have a 046 that i got off facebook marketplace for 400 bucks that ive brought back to life and i love it. i got lucky finding it id say. i think its an older D shaped chamber too but i havnt had it apart. i wanna tryt to port it but it runs so great id hate to mess it up being since im a novice in that realm
@illnaturedsaws 2 ай бұрын
@@swere1240 Same here. I got a cylinder off eBay and did some port work on this one but still pretty light compared to the pros. The 046 series is my favorite series of stihl saws.
@swere1240 2 ай бұрын
jb weld fixes everything lol i also got a vmodest to mess around with i figured hey if i get a years out of it ill be happy mine sometimes the plastic plate on the top pops off and it is getting a bit annoying lol have u had that issue at all?>
@illnaturedsaws 2 ай бұрын
@@swere1240 I haven’t. I’ve only had the air filter issue and other than that it’s been an awesome reliable little saw.
@sawsonthefarm 2 ай бұрын
@@swere1240 I've never had that model before.
@itserickwayne 2 ай бұрын
Is that your favorite saw?
@illnaturedsaws 2 ай бұрын
@@itserickwayne No way. This is a little Chinese saw. My favorite is my Stihl MS461. My 461 is the saw I use to drop hawgsss. haha Come over and try them.
@sawsonthefarm 2 ай бұрын
That looks like a nice little saw!
@elliotboyer1041 2 ай бұрын
Sweet! Glad you’re trying it. I’m thinking about buying one of these and porting it, advancing timing, and doing an exhaust.
@illnaturedsaws 2 ай бұрын
@@elliotboyer1041 They’re rowdy out of the box. They’ve got a very tunable carb so I’d say it’s worth it to port it. I was gunna do the same but don’t want to have to replace anything if it breaks during or after the process so I’m gunna go 1/4 pitch and call it good. lol
@elliotboyer1041 2 ай бұрын
@ I’ll test out the porting on this saw, if it works out well I’ll do it to my 2511’s I have
@joreyalejandracook 2 ай бұрын
Worlds smallest saw 😂
@illnaturedsaws 2 ай бұрын
@@joreyalejandracook A wise man once said “It’s not the size of the saw it’s the motion of the ocean” or something like that.
@elliotboyer1041 2 ай бұрын
Use a little grease or Vaseline to seal the filter. Or if you can find the right size oring to go over the hole where the filter twists onto.
@illnaturedsaws 2 ай бұрын
@@elliotboyer1041 ok for sure. Yeah grease won’t work cause the gap is actually fairly large. An O ring could possibly work but finding one that’s the right size and thickness will be interesting. Thanks for the feedback!
@elliotboyer1041 2 ай бұрын
@ take the filter to an ace hardware. They have all sorts of misc orings. Or maybe try a factory echo 2511t filter. That’s what that saw is. Just a copied version of a pro saw.
@elliotboyer1041 2 ай бұрын
@@illnaturedsawssorry, after checking your page you obviously know it’s a clone saw. I had just seen the short here and didn’t know what type of videos you did until after looking. Like my second comment the best bet is probably put a 2511 filter on it and see if that gap goes away. That would eliminate knowing if it’s the filter that’s off or if it’s the housing for the filter. If a 2511 filter still has a gap then it’s most likely the intake end of the carb being out of wack.
@elliotboyer1041 2 ай бұрын
Also the 1/4 pitch conversion turns the 2511 into a little power house, worlds of difference especially in hard wood. I did the WCS machined muffler too. Entirely different saw with just those two modifications.
@illnaturedsaws 2 ай бұрын
@@elliotboyer1041 hey thanks a lot, I kinda thought the same thing with the OEM filter. I’ll post an update if I get it figured out but at the moment I’m thinking an OEM filter is probably the best idea. So I appreciate it. Yeah a little carving bar with 1/4” on it would be too fun with this little saw. Can’t wait. Haha
@demetriogranados3879 2 ай бұрын
It's going to be good
@illnaturedsaws 2 ай бұрын
@@demetriogranados3879 oh yeah man I’m using an OEM cylinder and squish without a base gasket is right at 0.020. 🤘🏻
@TheRealLOLExpress 2 ай бұрын
Just ordered a pair of these! I went 1.5 sizes down from my sneaker size (10.5D). Can't wait to get them!
@illnaturedsaws 15 күн бұрын
@@TheRealLOLExpress I have some one size down and 1.5 sizes down and 1.5 down fits perfect for me.
@illnaturedsaws 15 күн бұрын
@@TheRealLOLExpress Thanks for taking the time to watch! Glad I could plug you in on them.
@TheRealLOLExpress 15 күн бұрын
@@illnaturedsaws No problem man! Thank you for the video. The 1.5 Sizes down definitely was the move for me! I even decided to wax the vamp and heel counter since I work with water. Just to help with “waterproofness”
@demetriogranados3879 3 ай бұрын
God bless you to !!!!
@demetriogranados3879 3 ай бұрын
Appreciate you taking the time to make this video brother!!! She runs and cuts insane!!! 💪
@illnaturedsaws 3 ай бұрын
@@demetriogranados3879 You’re welcome man. I appreciate your comment wanting to see her run!
@tomb5111 3 ай бұрын
Picked one up this morning, loving it so far
@demetriogranados3879 3 ай бұрын
That place is beautiful
@illnaturedsaws 3 ай бұрын
@@demetriogranados3879 The forest on the Oregon/California coast is gorgeous.
@demetriogranados3879 3 ай бұрын
Thats awesome!!!
@illnaturedsaws 3 ай бұрын
@@demetriogranados3879 Thanks man. It feels good to have old stuff that is still useful instead of buying brand new.
@demetriogranados3879 3 ай бұрын
I really want to see that thing in some wood looks awesome.
@illnaturedsaws 3 ай бұрын
@@demetriogranados3879 I got you. I’ll get a video up of me cutting with it soon. I have a locust tree I need to buck up.
@demetriogranados3879 3 ай бұрын
@@illnaturedsaws sweet
@Zayne_24 3 ай бұрын
I’m thinking about getting the adtec logger fire boots since I’m on a budget. I love how you said they’re not bad for an entry level boot. So if I’m hearing you correctly you can’t go wrong with either or right?
@illnaturedsaws 3 ай бұрын
@@Zayne_24 honestly man I wouldn’t recommend buying the ad tecs just cause they’re hard on your feet. But if you do they do hold up decently and with some insoles are 100% useable. Just know that it says they’re a 10” boot but they’re an 8-8.5 at best. They don’t even touch the quality and comfort of a true logger boot though.
@doublebase6509 4 ай бұрын
Glad to see a real worked Drew’s loggers video! Most are unboxings and hardly worked (mine included), but I’m now working mine pretty hard and hope to follow up on them. Doing great so far. Great video!
@illnaturedsaws 4 ай бұрын
@@doublebase6509 thank you! My boots don’t stay nice for more than a day usually.
@ОлексийДацун 4 ай бұрын
😂😂😂😂😂ну куди на раду
@marin706 4 ай бұрын
Another good song for this wild be Cold Missouri Waters by Cry Cry Cry
@illnaturedsaws 4 ай бұрын
@@marin706 I’m adding it to the playlist. Thanks!
@bryanmartin2271 4 ай бұрын
Sound Wisdom man many thanks
@tjdillon9827 4 ай бұрын
If you can’t figure out how to drill a bigger hole, you shouldn’t run a chainsaw
@geneevans2600 Ай бұрын
😂
@illnaturedsaws 4 ай бұрын
Like this comment if you want me to post a video of the process and what I used.
@wdglockandroll Ай бұрын
Can you please post that video. I’m having the same problems and don’t want to mess up my bar.
@illnaturedsaws Ай бұрын
@ Ok I’m on it.
@wdglockandroll Ай бұрын
@@illnaturedsaws You rock.
@illnaturedsaws Ай бұрын
@ Thanks man I’m uploading it right now. Should be up in 10 minutes.
@illnaturedsaws Ай бұрын
@ it’s up brotha!
@camden7488 4 ай бұрын
You didnt make the diameter of the hole any bigger. Only the funnel up to the hole. Common sense tells me the same amount of oil is going into the hole therefore same amount going around bar. You wint get more oil to bar without a larger diameter hole. The hole only allows for its capacity no matter how big the funnel is 🤔 Thats cute though.
@illnaturedsaws 4 ай бұрын
@@camden7488 I did widen the inner diameter as well but either way the opened up slot acts as a shelf for the oil to sit and as the bar spins it pulls oil from that oil hole. So even having just widened it will make more oil available to go to your bar because it has more oil immediately available to pull from. Not cute just backyard science.
@jamesrehak1312 4 ай бұрын
Please include how this is done. I am guessing a burr on a dremel ?
@illnaturedsaws 4 ай бұрын
@@jamesrehak1312 Sorry man but yeah I did it with a carbide grinding tip on a dremel then also smoothed out the edges with a stone bit.
@LT.Dantheman 5 ай бұрын
So true I did that too all my barrs way before I seen this brand your own bars
@illnaturedsaws 5 ай бұрын
@@LT.Dantheman it’s a massive improvement. My bars last way longer now and I don’t have to dress them nearly as much.
@jakecarter2414 5 ай бұрын
I guess the old logger doesn't build those chainsaws or he would have made them wider from the factory?
@SLCA46 5 ай бұрын
Planned obsolescence?
@twomorebeers520 5 ай бұрын
Love this
@mattgeib3191 5 ай бұрын
Whatd you do drill it out? What size? Ive got a husqvarna light commercial and ive been having issues with it overheating here and there and it would be dry. Id break down and clean it and fire it up and it would throw oil but run dry when i laid into anything on the thicker side
@AutoMotoMechanic 5 ай бұрын
Bigger.. make hole bigger. 😅
@illnaturedsaws 5 ай бұрын
@@mattgeib3191 I just used a carbide dremel head and widened the existing oiler hole.
@briankennedy1313 4 ай бұрын
Everyone should own a dremel. The answer is dremel. Without being a condescending prick.
@littlejackalo5326 4 ай бұрын
If it's getting enough oil, and then running dry when you start cutting, that is a different problem. You don't magically start getting less oil as you start cutting. 30 years of ranching and a dozen different Stihl saws, and I've never had an issue.
@illnaturedsaws 4 ай бұрын
@@littlejackalo5326 the problem I was faced with that led me to this was my Stihl 400c comes stock with a very weak oiler. My bar was constantly getting overheated and when I would fill the saw the bar oil would barely have gone down. It was either buy an upgraded oiler or open the holes on the bar.
@naisobouss9691 5 ай бұрын
Yo im a wildland firefighter sawyer in Oregon your videos are awesome man keep it up!
@illnaturedsaws 5 ай бұрын
@@naisobouss9691 thanks a lot! keep your saw sharp and your head straight out there bro.