johnsmanvillevideos

Пікірлер

@victorvek5227 Ай бұрын

Terrible demo video. And not many others available in the entirety of KZbin years later. Do better.

@cryptowatch6622 Ай бұрын

Awesome 👌 video, and straight to the point. Thank you

@Lilliputian63 2 ай бұрын

I love this stuff, and it's a heck of a lot cheaper than kerdiboard. Recently, working on a project, using GoBoard, I encountered what to me looks like a major manufacturing defect. Everyone knows that GoBoard has an interior core and an exterior "skin". The problem is, the interior core appears to be manufactured in lengths that don't always fall evenly on cuts. And so in my board (I've now found it in 2) have a seam of internal core boards that meet at approximately 2/3rds of the length. The problem is, when I screwed this to the studs, the board had a slight buckle at the seam joint, creating a crown that was about 1/8" high. Not good, especially if you have to tile across it. I used a rasp to scrape it down just a bit, without cutting through the outer skin, but this has me wondering an out the manufacturing process. Why not match up entire lengths of the core with the skin? Why are they trying to join together 2 separate cores inside a whole board? I'm not happy and if I use it again, I'll be looking to pick out boards without these seams.

@thelaserdoc1 5 ай бұрын

Why do you add mesh to the floor and not to the wall.

@DannyStickley 5 ай бұрын

What if you overfill the gap?

@heresalemonsukonit276 4 ай бұрын

Cut it back with an insulation knife (home depot) It's a cleaner cut then a handsaw

@GerrysGuitar 5 ай бұрын

Wow, pretty informative. However, you messed up on your tile layout by mirroring the inside cuts instead of continuing the flow. Better luck next time.

@theoPhobiaz 6 ай бұрын

Yeah, not happening, lol

@tall8743 Ай бұрын

Foil tape works better , either way if the outside of the home is properly sealed it doesn't matter .

@unccysammy 6 ай бұрын

Inside corner instructions? Did i miss the part where he gives instructions for sealing the inside corner? Id like to see that.

@Wilem35 6 ай бұрын

No, use foam boards only in a crawlspace.

@Tom-zp1rp 6 ай бұрын

Talk out the thousands your company murdered in Manville Nj

@safeliving-home 6 ай бұрын

I've been following your bathroom renovation projects and appreciate the insights you share. I recently conducted a detailed exploration into the safety and installation practices concerning foam core backer boards, specifically focusing on the critical role of wood blocking for secure grab bar installations. Our findings highlight the potential risks and structural integrity issues that can arise from omitting wood blocking, even with the most reliable materials and techniques. Given the importance of safety and durability in renovations, I thought this information could be beneficial to your projects and audience. Incorporating wood blocking can significantly enhance the strength and safety of grab bar installations, a detail that's often overlooked. I'd be happy to share our findings and discuss further. Keep up the great work, and thank you for sharing your knowledge with the community!

@user-xl8oj4mq7p 7 ай бұрын

What if you hit it right between the studs?

@michaeld2613 6 ай бұрын

I have seen where people install horizontal backing behind the Go Board about waist high just in case someone slips and hits the wall with significant force. An added bonus is you can add a grab bar in the future with sufficient support.

@breedlofam 11 күн бұрын

If you look at the impact, it was between the studs

@breedlofam 11 күн бұрын

It was between the studs

@davidsquires2802 7 ай бұрын

Right ear is huge

@gwb8445 7 ай бұрын

Get rid of the annoying background music!

@twelfthhausjones6753 8 ай бұрын

I miss when educational videos were like this - straight to the point, informative, & clear to understand. Thank you for this video, it was very helpful.

@redsresearch 8 ай бұрын

what kind of sealant?

@foggymtnbreakdown 9 ай бұрын

That "music" is just SO bad, it is painful.

@davidchillton1744 9 ай бұрын

It be great if your reps would actually give a price for the product

@michaelcarton3299 10 ай бұрын

Why are you using loctite sealant? GOboard sells its own sealant. Is there a list of approved sealants???

@ganymededarling 7 ай бұрын

This is a really old video probably before they made their own sealant

@tabbott429 6 ай бұрын

its half the price and works just fine

@unccysammy 6 ай бұрын

Someone mentioned in a comment on here that there is a list of approved sealants on the website.

@thomasmurphy9350 10 ай бұрын

He he he said black cox😂😂😂

@thomasmurphy9350 10 ай бұрын

Nice work thanks especially for showing how to work it down that makes a big difference in the way the corners last. In the winter we do a lot of temporary repairs for upcoming customers and projects. And you really can tell the difference in how they are installed 😂😂😂

@salcosta1156 11 ай бұрын

Does anyone know if fiberglass tape and mortar be used for the Go Board seems instead of Polyurethane sealant? Also, can Mapei Aqua Defense be use to cover the entire board, as an extra waterproofing step?

@DR-um2bv 10 ай бұрын

What you find out

@AK-ky3ou 10 ай бұрын

Sure, if you’re covering the entire board with a waterproof membrane you might as well buy something cheaper.

@tabbott429 6 ай бұрын

why bother?. If your tile lets water behind it youve got bigger problems

@JW77 11 ай бұрын

What type of surface material is it? Can rodents chew through it? I'm thinking about making my crawlspace entrace cover out of this.

@mirapeters8895 Жыл бұрын

Too fast

@ericroskos4500 Жыл бұрын

I would make my Target out of field material and it would still have theinch going up the pipe before I feild wrapped it

@JamesDavis-dn3wo Жыл бұрын

Why are you using Aqua Defense when it states right on the board that it is waterproof?

@2222MUDDYWATERS 8 ай бұрын

Seams

@callmemcgyver Жыл бұрын

Is this product similar to Easy Board?... I used Easy Board a few years ago for a non-tiling related project and liked it, but it seems to be discontinued now and I'm looking for a similar material. Easy Board was similar to Gator Board, (used in sign making) in that it had a dense foam core, sandwiched between a rigid waterproof skin. Thanks in advance for any information.

@robertsalvador5097 Жыл бұрын

You guys need an updated video

@JavierGonzalez-pn1gk Жыл бұрын

This helpful for people like me as a apprentice

@moemanm1202 Жыл бұрын

Can you use a silicone sealant instead of a polyurethane sealant? I was under the impression that polyurethane detetiorates after 5 years whereas silicon can last 20+.

@ryanmuth2390 10 ай бұрын

Their website says they do not recommend silicone but it has a list of other approved sealants

@josevera5426 Жыл бұрын

This guy know what hes doing! nice trick to cut a piece with the exact dimensions to wrap the cone avoiding wrinkles

@eltonnoway7864 Жыл бұрын

STOP: Do Not Use this video for instructional guidance. GoBoard is great... but the installation instructions have changed many times in the last 7 years. Do yourself a favor and search KZbin for a more current GoBoard installation video.

@mirapeters8895 Жыл бұрын

I thought you didn’t have to apply redgard or other products like that if you use the GoBoard sealant. So you need the other stuff too?

@chrisc.1868 Жыл бұрын

You only need the waterproofing membrane where you didn’t use polyurethane sealant.

@hollys4664 Жыл бұрын

please turn that background music off.

@bajatankpozarica6130 Жыл бұрын

A cuantos grado para soldar ese material

@Bryan-by5sb Жыл бұрын

No se quema específicamente por grados sino por niveles de calentamiento el heatgun tienes del 1 al 9 en la mayoría… para empezar se recomienda al 7; yo la uso al 8 ya si quieres ser más rápido le subes al 9 pero ahí ya quiere más experiencia pero ay muchos mas factores que también afectan.

@Diaz0620 8 ай бұрын

Uno mismo te vas dando cuenta pero yo te digo que es mejor 7 la mayoría de las personas note dice si le subes es más rápido pero hay otros tiene que subir los 9

@alexanderaldana4437 5 ай бұрын

Cuando se hacen detalles como ese es mejor en 6 amigo el 7vpuedes usarlo para membrana regular

@buckJuddson Жыл бұрын

I have never seen anybody use their fingers to roll it in 😂

@EricPotratzM Жыл бұрын

Why is GoBoard installed on the floor with thinset instead of sealant like in the wall installation?

@TruongNguyen-fc2hw 8 ай бұрын

Probably because you would go broke spreading that stuff on the floor

@tabbott429 6 ай бұрын

Its not a pool. You dont need waterproof seams on the floor. THey alwasy overkill this stuff.

@joeshulman2501 Жыл бұрын

Great video but Id rather just buy the TPO boot from flashco for 30 bucks.

@rickvess790 Жыл бұрын

The "how to" directions from JM has changed SO MANY times in the last 6 years becuase they have added many different supplemental items to make thier original GoBoards better. I wish they would eliminate all of the old (now WRONG) internet references and publish a new definitive set of best practices based upon what they currently offer.

@garrettp.5018 10 ай бұрын

Agreed! I’m seeing a lot of different techniques that are “sponsored” by John’s Mansville.

@ireflectOfficial 7 ай бұрын

What’s the best recommended sealant for the board? GoBoard sealant, OSI Quad max or something else?

@c1rca23 2 ай бұрын

@@ireflectOfficialthey do make their own caulking product. GoBoard pro sealant.

@eddiemurray5508 Жыл бұрын

Thank you. Nice video

@DavidT-kr8fl Жыл бұрын

Why cant you add insulation on the room side of the wall?

@AKshootingARs Жыл бұрын

We just finished installing this insulation in our house, we did it ourselves, and I am just beyond impressed!! This stuff truly is amazing!! So much easier to use, and just so far superior in every way!!! I am so happy with my choice!!! If u need to insulate or replace insulation, this is what u want!!! I will never use any other type of insulation again!!!🥰😍🤩