Hello - you would put the pocketjet printer into the C-PMX-101 or C-PMX-102. You could then fit the rest of the items in the 18” section of mounting space. For a 2020-2024 Interceptor Utility you also have the option of the C-OHC-INUT-1.

hello! This was for the previous version and not something we make or support anymore.

I believe it is so you can either used external antenna hooked up to TNC on the back of the docking station or use the onboard antenna if the vehicle has no external antenna.

it charges with the dock...

Hello! We used to make one (DS-PAN-210 and 220 Series), but it has been discontinued. There may still be a few available if you reach out to a local reseller: www.havis.com/how-to-buy/find-a-reseller/

Ebay

Hello! From what I can see online, the 2018 Silverado 3500 LTZ DRW has a full length OEM console. Our C-VSW-2600-SILV console could be installed if the OEM console is removed, but this would require a center trim panel to be purchased from Chevy to fill open space and for our console to fit the dash correctly. Our C-VS-1000-GMC-1 should work but I suggest looking at the install instructions and product page to confirm you have the same OEM console.

Hello! We offer a 2020-2022 Ford Escape console (C-VS-0419-ESC) and we still offer the 7 switch (C-PS-7-L).

@@HavisIncorporated I need one for my 2012 Ford Escape

@@jaredcorbin7104 Unfortunately, we no longer make consoles for the 2012 Ford Escape.

@@HavisIncorporated there has got to be some in a box somewhere. But I heard that there were few produced. The dream is to find a C-vs-1800-ESC-1. Can you guys try to source one? I know they are discontinued.

​@@jaredcorbin7104 We just checked our resources and came up short. There is a chance one of our suppliers kept stock on that product. I would check out our reseller page: customers.havis.com/index.php/how-to-buy/find-a-reseller There is also the option of a universal console: www.havis.com/catalog/Universal_Consoles-51324-1.html

Hello! That was a Black and Decker cordless screw gun - it wasn't very powerful, it was more to just run the screws in and out instead of using a 1/4" ratchet or screwdriver.

@@HavisIncorporated Ok thank you! I was able to replace the screen, thank you so much for this tutorial!

The mount is annoying

@@2KCamaroZ28SS it makes horrible noises and cannot be tightened to stop the noise every time you hit a bump.

Hello! Yes - The VSX consoles are still available. You are able to buy one for a 2020 model, but you would need to go through one of our resellers or distributors.

I wasn't able to purchase the VSX console through Dana safety supply and I am very satisfied with the product, though I wish the console came with filler plates.

Hello! What is pictured is C-TTP-INUT-1201, Fold-Up Cargo Plate. The Modular Storage Drawer is mounted directly to the fold-up plate, so it can be raised independent of the K9 rear partition. The TTP does work with Havis standard- and extended-length K9s, using a filler panel that closes the gap between the cargo plate and the rear partition. We do offer other stationary mounting solutions for the Interceptor Utility as well. SBX-5001 works with the extended-length K9, SBX-5007 works with the standard-length K9. These simply mount the storage drawers at floor height in the vehicle, and there is no fold-up plate.

Hi Todd - that is our interceptor utility.

Hello! The Havis VSX console line is only available for the 2021+ Chevrolet Tahoe and 2020+ Ford Interceptor Utility. We offer a wide range of consoles for the 2015-2020 Chevrolet Tahoe. You can see more options at www.Havis.com.

Hi Dominick, the setup shown in the video is only applicable for the 2020-2021 Ford Interceptor Utility. We do have a similar setup for the 2013-2019 Interceptor Utility. However it will not have the mounting provisions for the SBX-1000 series drawers. Holes would need to be drilled for that. 2015 FPIU setup: C-TTP-INUT-200 C-TTP-INUT-2

Hi Dan! We do not recommend mounting the CF31 in material handling applications due to its size and weight, but we have many safe and reliable solutions for tablet mounting on forklifts.

@@HavisIncorporated okay what is the model number of your mount for that application so I can check it out?

@@HavisIncorporated The customer has already gone in that direction. I'm looking for your best option to mount the CF-31unit on a forklift.

​@@DJ_Driven Hi Dan. Are you able to provide images of your current setup for us to review and provide our recommendations? Please email them to [email protected]. Our product manager is going to look into this for you!

@@HavisIncorporated My company also just purchased CF-31 toughbooks for us to use, and has now tasked us with finding mounts. Do you have anything for a forklift yet for this laptop?

I don't have the special tool to adjust mine.....why make it complicated???

EPIC

why do people ask questions and ignore answers?

This product has been discontinued.

EPIC.

Hi Gregory, thank you for taking the time to watch the video. If you email [email protected] and let us know what state you are in, we'll have the proper territory rep reach out to see if we can assist you. Have a great night!