What bike was the swing arm from ? And what about the front wheel for a wider one please
@KeepItWheel10 күн бұрын
Swing arm was from a later model I think 2015 these wheels are also bigger front and rear you can still keep your standard forks but need the later model wheel spacers hope ti's helps buddy
@user-Merovingian19807 күн бұрын
amazing @KeepItWheel so i can just buy the fatter wheels swing arm and spacers i can keep the original forks
@KeepItWheel7 күн бұрын
@user-Merovingian1980 yes buddy defo 👍🏻
@user-Merovingian19807 күн бұрын
@@KeepItWheel sorry to keep bothering you my bike is the 2004 model does that matter
@KeepItWheel6 күн бұрын
No not at all buddy
@rolloutred85220 күн бұрын
Great video, what stand is that you have. Thanks
@RODAREZconAmorАй бұрын
I bought the same racks here in the US, now I want to get the same cases. How did you connect the cases with the rack?
@alloyd6241Ай бұрын
Great little film! Can i ask which mirrors you have on the CRF?
@KeepItWheelАй бұрын
You can find them on ebay cheap and foldable for around £12
@alloyd6241Ай бұрын
Cheers.. I was hoping you were going to say that and they weren't expensive 😂
@BrentSelandАй бұрын
Iap sensor kept me confused for a minute.
@TheCaptainbarnaclesАй бұрын
I’m impressed how you handled that massive step at 20:29, I think you only fell of as you weren’t planning for it to work so were surprised to be there. Happend to me many times doing something technical and falling off on the east bit after as I wasn’t expecting to get that far.
@KeepItWheelАй бұрын
Good call your definitely right !
@africatwinmanАй бұрын
Reset dct
@idfklol31812 ай бұрын
Hi i love the video i have a question however . Whats that metal tiny stick on the left of the chain sprocket when u open the cover... Mine is wobbly is that bad.. Im not a mechanic but i do my best to understand and id love someone who could explain this to me
@KeepItWheel2 ай бұрын
Hi buddy nothing to worry about that metal rod operates your clutch when the side casing is in place.This movement is totally normal .Hope this helps
@idfklol31812 ай бұрын
@@KeepItWheel thank you i guesssd it had to do with the clutch however it keeps comming off if i push it .. Its a used bike im tryinb to restoreit thank you once again flr the lovely video
@UNIVERSEBIKE2 ай бұрын
Hello! Can I include this video in my future content? Appreciate your response! :)
@KeepItWheel2 ай бұрын
Yes no problem at all
@kauko81242 ай бұрын
Nice instructions! Bearings you had there originally were installed the seal towards the outside, no seal towards inside, wrong way.
@KeepItWheel2 ай бұрын
Your point being ?
@TenDegrees2 ай бұрын
OEM Suzuki bearings come installed with the covered part facing OUT. Just replaced front and rear bearings on a TL1000R last night. New bearings (AllBalls brand) were sealed on both sides.
@KeepItWheel2 ай бұрын
If you noticed the top of the range "koso" bearings we installed also had seals on both sides, yes, you are correct previous bearings were installed incorrectly but by the previous owner ! Thanks for your comments buddy ride safe 👍
@davefaulkner91772 ай бұрын
What make is your front axel stand?
@KeepItWheel2 ай бұрын
Just a generic one from good old ebay type in front paddock stands and a number of the same type in the video will pop up you get a better deal buying front and rear but check it out thanks for the interest buddy
@reaver693 ай бұрын
Stunner. My TLs is running Yoshi Cams, Yoshi full system, PC 5 with a flashed Ecu. Front end is EBC discs with Brembo pads and RGV250 N calipers. front brake is insane for bite! braided lines. Suspension is all Maxton, with adjusted rake. May be old but a proper weapon 🙂
@KeepItWheel3 ай бұрын
Sounds awesome buddy would love to see it 👍
@ADV.Monkey3 ай бұрын
Hello Mate thanks for the Video. Just wondering if your bike already had the Grab rail installed. I have the 2020 model and it does not come with the grab rails.
@KeepItWheel3 ай бұрын
Hi yes grab rail already installed on the 2023 but SW MOTEC do a rack with top plate to fit yours for a reasonably £125 might b worth a shout when going for this system 👍hope this helps
@PlattLaneEnd3 ай бұрын
Fair play to you. I've been riding 40 odd years, but if I'm being totally honest, I still find big adventure bikes a bit intimidating.....
@KeepItWheel3 ай бұрын
Us too buddy but we are slowly getting better ! Thanks for you comment buddy 👍
@kevinc87443 ай бұрын
Thank you for taking the time to put out this information
@darnhard3 ай бұрын
del ke vic
@mickemmett68284 ай бұрын
Unfortunately the food and especially the coffee is very hit and miss at Squires, the girls they have serving and making the coffee are on a bit of a fast turnover and a lot of them haven't even made their own beds before starting there let alone made a cup of coffee. The regular visitors to Squires soon learn which girls to go to for a decent cuppa.
@Busaboy13004 ай бұрын
Now i know how to do mine on my gen 1..great video mate.love it.
@michaelmclarney19944 ай бұрын
Thanks for the upload, very interesting piece of kit. Im looking to get an adventure bike and soft luggage may be an option for me. I look forward to seeing how it performs when you test it.
@ogasi17984 ай бұрын
get more seat time and learn more off road specific technique - well done for trying lads , possibly brush your skills up on slightly easier lanes, these are not hard by any means so if you get more basics and hours in the saddle you will come back to these and laugh
@ollydogtravels94655 ай бұрын
fair play fellas
@4tech695 ай бұрын
Excellent video.
@therealbikerz5 ай бұрын
Hey friend. All good to feature it? Full credits will be given to you, of course. Thank you so much!
@KeepItWheel5 ай бұрын
No probs at all 👍🏻
@Sentenced0015 ай бұрын
god damned i could have done this myself instead of paying the guy
@KeepItWheel5 ай бұрын
Knowledge is power my friend 👍🏻
@rm250885 ай бұрын
I am going over mine this year. Already started ordering tons of parts.
@KeepItWheel5 ай бұрын
Mint bikes buddy you will definitely enjoy
@MotorcycleExtreme5 ай бұрын
Hello, Rider! Hope you're doing great! :D :) Love this clip! Would it be OK if we used it in a youtube video we're making and maybe share it on our social media? We'll credit you in the video and all descriptions. Thank you! :) Can you explain what happened?
@KeepItWheel5 ай бұрын
Yes no problem at all
@KeepItWheel5 ай бұрын
Just a simple case of using road tyres which clogged up with mud basically turning the tyres into slicks lol
@MotorcycleExtreme4 ай бұрын
@@KeepItWheel Hey! Your clip has been used in this video: kzbin.info/www/bejne/nJvaXnpniZeDa9U Thank you for allowing us to feature it!
@masface65 ай бұрын
Hey, man! IS it cool if I use this for a video on my channels? I'll fully credit you for whatever I use! Lmk and thanks!
@KeepItWheel5 ай бұрын
Yes no problem 👍
@mohammedalwerfally21965 ай бұрын
I am really stuck couldn't adjust my throttle body screws probaly can u help ?
@KeepItWheel5 ай бұрын
Whats the issue buddy ?
@Motorcycle-Moments5 ай бұрын
How are you? May I share this video for a youtube edit that I'm working on? I'll credit you on screen of course. Thanks in advance.
@KeepItWheel5 ай бұрын
Yes no problem use what you like and thanks for asking 👍
@MotoInsanity5 ай бұрын
Hey mate, would it be nice to feature your clip in my next episode? Credited of course (watermark and link to your channel).
@KeepItWheel5 ай бұрын
No problem at all thankyou
@MotoInsanity5 ай бұрын
Thanks a lot!@@KeepItWheel
@baldandbiking5 ай бұрын
Great stuff and well filmed. I have a similar course coming up this spring and wanted to get an idea of what I'm in for. What you did there got pretty technical and with all that rain was a huge challenge. You did extremely well and I hope I can do as good.
@KeepItWheel5 ай бұрын
Thank you 👍 it's a great experience and you will learn so much😉
@impalaSS655 ай бұрын
Truly great sound. But what 's the deal with the knobbies? Sliding around as it is, with my Michelin pilot road 5.
@chriscooperCRF3006 ай бұрын
You guys enjoy the TET and all trails, why did you let your 250's go? I bought a new T7 for TET touring etc, to big, to heavy, now on a crf300 rally, its no enduro bike but it doesn't hold me back and i have no fear tipping into any trail, the best thing is it will sit at 70mph and im off to the Pyrenees in May. Pretty sure Steve used to keep his caravan on my storage site in Lambley? If it is you, how's it going 👍🏼 Chris
@KeepItWheel6 ай бұрын
Great to here from you Chris and you right it is me lol 😂🤣 we got the AT for big mile tours and your right the 250"s are better suited to the trails snd you can tackle most if not all of them easily. We just wanted bikes that in theory can do it all and carry camping equipment etc.The AT defo way too heavy and a defo challenge but we wont give ip on them and keep pushing on lol.You still have the T7 ?
@chriscooperCRF3006 ай бұрын
A up mate, thought it was you 😂 No mate I sold the T7 it wasn't a bad bike but it was very top heavy with a shit turning circle, AT is a much better bike all round in my opinion, just as capable off road and much better on road. I'm doing everything you guys are doing on the 300 rally, all be it a little slower, doing the ACT Pyrenees in May, should be fun. I'm always up in Derbyshire, maybe have a ride with you guys one day 🤙🏼
@KeepItWheel6 ай бұрын
@@chriscooperCRF300 defo buddy will give u a shout👌🏻👍🏻
@SieRoX876 ай бұрын
Good effort guys!! I’ve ridden some TET’s as well with my 1100 AT and laid her down plenty of times. She’s heavy! 😅 I did noticed you don’t disable all the 3 electronic interventions? Especially the Traction Control and Wheelie Control. During the last hill climb I saw the engine cutting the power a few times trying to intervene with the loss of traction or wheelie controle during the angle of attack during the climb. It does take some time to disable all 3, but it’s well worth it. Good luck on the adventures!! 👍
@KeepItWheel6 ай бұрын
Yes your definitely right we have sorted that out now and have customised "user1" now its a quick disable of the abs and we are good to go 👍🏻👌🏻
@sarkystarkey6 ай бұрын
Fair played to you both. Some challenging riding.
@KeepItWheel6 ай бұрын
Yes was a challenge especially being hung over🙈New tires fitted so we will return soon! Thanks for watching ✌️
@Trails076 ай бұрын
Karoo Street not good for that kind of course. Nice try.
@KeepItWheel6 ай бұрын
Agreed! More suitable tyres have been fitted so watch this space👍
@Trails076 ай бұрын
@KeepItWheel I am using Karoo 4 for 5000 km and i can say they are such good on the road either
@northof49adv6 ай бұрын
Hey guys, I think different tires would have helped a lot , something more off roady maybe....
@KeepItWheel6 ай бұрын
Defo already fitted and ready for another attempt. Hopefully, will nail it next time, buddy
@googlelimp98346 ай бұрын
to big t heavy to old to fat simple lol
@dirtbikelunatic6 ай бұрын
Hello! Would it be okay to use it in compilations and maybe on some of ours Social Networks? You will get full credit for it. Thanks
@KeepItWheel6 ай бұрын
Yes mate no problem 👍
@dirtbikelunatic5 ай бұрын
@@KeepItWheel Thanks a lot :)
@johngarrity69426 ай бұрын
Serious green laning there boys!! ATs maybe a bit too tall and heavy - I have a 97 XR600r that might cope a bit better, nice to see you two back!! All the best!! 👍🏍🏍👍
@KeepItWheel6 ай бұрын
Cheers, buddy . Defo planning to return to the exact trails this year, and my AT is now armed with better tyres, so hopefully, we will get those nailed and onto the next 👍
@freddieparrydrums6 ай бұрын
Alright mate, building my bike now. What carb did you use? Cheers!
@KeepItWheel6 ай бұрын
We ran in the production class and so stock carb must be used with std air box but with filter change hope this helps 👍
@freddieparrydrums6 ай бұрын
@@KeepItWheelAwesome mate, thank you. Sorry to be a pain, where did you get that spacer and the two things to mount the crash bungs in? Cheers!
@KeepItWheel6 ай бұрын
We made all the spacers and brackets ourselves buddy as we are lucky enough to own a lathe .please feel free to ask for any advice ,will help with whatever we can
@freddieparrydrums6 ай бұрын
@@KeepItWheel Appreciate the message mate, guess it's time to invest in a Lathe!!! Needed to get one anyway really. My CBR is coming along and these videos are great help :)
@petebaumbach79446 ай бұрын
thank you for this Pete
@thequickwaydown..25997 ай бұрын
Fair play Gentlemen, they're some tough lanes on the big bikes.👍🏻👍🏻👍🏻 a quick question, where was that water crossing, we've not found that one yet.. 😂 Just subed, keep up the good work.👍🏻👍🏻 funny to hear someone else that also ends up blowing out of their arse too.. our normal intercom announcement is "who' blowing out their arse"? 😮💨😂😂
@ADVMoto_Geoff7 ай бұрын
If your going down to Wales to do the Strata, check out Elen valley and Nant Y Moch whilst your down there. The later is a big bike play ground especially if wet.
@ChrisWilk7 ай бұрын
Great chatter, had me pissin me pants.... just subbed looking forward to hearing ya bantering back n forth! Goodday M8s!
@thewoodster86078 ай бұрын
Nice to see Pat again. His enthusiasm is infectious. I was off five times over the two days. Great fun but I was shagged when i got home. We had similar weather. I was amazed how much I learnt over the two days.
@jimmcpherson81178 ай бұрын
The background music is really annoying and degrades your subject delivery.
@KeepItWheel8 ай бұрын
Agreed
@HippoDrones8 ай бұрын
Well done lads, it is a lot harder on a big bike, but so rewarding.
@FayFay_858 ай бұрын
Weldone!
@FelixBillson8 ай бұрын
@11:22 - was that comment aimed at me? Haha, I wasn't struggling!
@KeepItWheel8 ай бұрын
Yes I think it was, pat spotted you was struggling 😉
@FelixBillson8 ай бұрын
@@KeepItWheel nah it was the other lad in the orange, I just went frame by frame and I hadn’t turned up yet haha. Was a pleasure riding with you lads and day 2 looked good fun, well ridden! Haven’t written anything else yet #GSfanboy