Does the MUL model come with the chipper chute, or does this need to be purchased separately?
@ForestMaster2 күн бұрын
Thanks for your question about our mulchers! The Upper Discharge Chute is not included and needs to be purchased separately.
@koalabear193 күн бұрын
Could it handle soft rushes too you reckon? We have a lot! Also, how often would the blades need sharpening/replaced? Thanks
@ForestMaster2 күн бұрын
Thanks for your question about our mulchers! Yes, our mulchers can handle soft rushes, but for optimal results, we recommend mixing it with wood to prevent blockages. In terms of the blades, we recommend replacing them rather than resharpening them. Replacement blades can be purchased on our website. You can simply replace them when you feel they are getting dull!
@koalabear192 күн бұрын
@@ForestMaster thanks for the prompt reply. Just with regards to the FM4DDE, is there any difference inside compared with the FM4DDE-MUL with cutting, or is it just the exit chute is different? Looks like a good machine :)
@MrElvisr274 күн бұрын
The wood he is splitting is already ready for fire... No point 8n buying this
@MARTINWHITELAW6 күн бұрын
great product but TEG is too big to allow screws through on my particular fan !
@nonacesool7 күн бұрын
once a year?
@ForestMaster7 күн бұрын
Great question! While our oil is designed to last for up to 25 hours of continuous use, it's still recommended to change it annually, even if you haven't reached that usage limit. This is because over time, the oil can degrade due to factors like heat, oxidation, and contamination. Regular oil changes help ensure optimal performance and longevity of your wood chipper.
@nonacesool7 күн бұрын
@@ForestMaster Ah ok mine is 6 y old lol ill chaange it then
@LKDesign11 күн бұрын
Hm, on the one hand that pumping action takes an awful lot of time. On the other hand it works quite effortlessly. Though I have seen a solution with a winch which looked rather nice. But that could be very limited in lifting heavy loads... On to some more research!
@johnathanross895120 күн бұрын
Looks good but would like to see it tested against bigger logs.
@mikicatumbleweed656120 күн бұрын
So it's is basically a wood splitting axe for soy boys.
@sharkeyist23 күн бұрын
4hp off a coiled up 13amp 3pin??? I call bs.
@chsatish24823 күн бұрын
What is the price of Indian currency
@ollydeardenАй бұрын
Modern man 😂
@joburg159Ай бұрын
would this guide work for the FM10 too?
@ForestMasterАй бұрын
Hi there! Thanks for your question. The FM10T assembly is pretty similar to the FM5T/FM8T, but with a few extra bolts and a slightly different front leg. We're working on a dedicated assembly video for the FM10T soon. If you have any questions in the meantime, feel free to drop us a line!
@pascaltoffaloni2380Ай бұрын
Oui, ça à l'air très simple comme ça, sauf qu'il faut la douille qui soit exactement du calibre de la vis, elle pourrait être vendue avec le broyeur ! impossible de démonter les miennes. Les vis sont bloquées à fond et les têtes très peu épaisses, j'ai déjà ripé et j'ai peur de les abimer. Pas très content de mon achat car en plus il y a du bourrage continuel à l'évacuation des copeaux.
@shreddermachine9321Ай бұрын
Nice machine
@ForestMasterАй бұрын
Thank you!
@AWSMEADАй бұрын
Just bought two of these for training/firewood processing. Hope they are robust!
@ForestMasterАй бұрын
Thanks for your purchase! We hope you enjoy the BLS-3H. Let us know if you have any questions!
@BigCheese85Ай бұрын
Can you disable the safety?
@ForestMasterАй бұрын
Hi there, thanks for watching! The two-handed design is a safety feature that complies with European regulations (UKCA/CE).
@TreeboyltdАй бұрын
Always good products from forest master… I would like to see a video on your new remote control mower.. more information on its performance would be nice as I’m in the market for an RC mower.
@ForestMasterАй бұрын
Thanks for your kind words! We're currently working on a redesign of our remote control mower, so a video review will likely be available once the updated model is released :)
@TreeboyltdАй бұрын
@@ForestMaster that would be good. What is it mainly used for… would it be a rough cut mower? As rock machinery have one available now that can tackle some pretty dense undergrowth. And there’s is just shy of 4K!
@ForestMasterАй бұрын
@@Treeboyltd Thanks for your enquiry! Yes, the ‘MM-LM550’ is specifically designed as a rough-cut mower, perfect for clearing dense undergrowth. It runs on a 7 hp Loncin engine and features crawler tracks, making it capable of handling rugged terrains and slopes up to 45°. With its 550mm cutting width and adjustable height settings, it’s well-suited for heavy-duty mowing tasks. Priced at £2,999.95, it combines power and manoeuvrability, making it a solid choice for challenging landscapes. Let me know if you'd like further information!
@TreeboyltdАй бұрын
@@ForestMaster thanks for your prompt reply, I will definitely be looking forward to seeing this mowers performance!! If it’s like your other machines we are all in for a treat, as they run extremely well and do a great job!! 👏
@ForestMaster2 ай бұрын
Let us know if you have one of our log splitters!
@meryldyer31162 ай бұрын
Price
@ForestMaster2 ай бұрын
£1,998.99 incl. VAT
@Adventurefamily0072 ай бұрын
Can help me, How much is this machine?
@ForestMaster2 ай бұрын
Hey, this machine would be £494.99 incl. VAT
@Adventurefamily0072 ай бұрын
@@ForestMaster , Which country is this machine made in? Can I buy 1-2 more separate sets of chipper teeth? Or how to maintain the chipper teeth when they wear out?
@mbda12 ай бұрын
available in the US?
@ForestMaster2 ай бұрын
Hey, sadly we have no stock over in the US 😥
@mbda12 ай бұрын
@@ForestMaster right, but can't ship here either? checked your ebay store, you ship around the world, but not US?
@kurtmanshardt98252 ай бұрын
Sorry, but the answer to that is a very definite. No, unless I see it, do some serious log Splitting, sorry, no sale.
@ForestMaster2 ай бұрын
Just like in the rest of our Log Splitter videos...👀
@johnnyxmusic2 ай бұрын
Dude, watch your fingers!
@ForestMaster2 ай бұрын
Fear not, Johnny! We have a guard at the top of the hopper that prevents hands/fingers from going into the machine. It's safe! 🙌
@truth33582 ай бұрын
cheap blades let it down would never buy this make
@ForestMaster2 ай бұрын
Thanks for commenting! In terms of the blades, we actually use forged steel blades in all our wood chippers for their strength and durability, plus, they're also reversible to extend their life.
@Giraphant872 ай бұрын
Does this convert machine from FM4DDE-MUL to FM4DDE? After I install this kit would it only allow me to chip wood and not mulch softer stuff?
@ForestMaster2 ай бұрын
Great question! Yes, the Upper Discharge Chute would essentially convert the FM4DDE-MUL into an FM4DDE. It would make it better at chipping wood, creating larger wood chips. You can still use it for greenery, but for optimal results, we recommend mixing it with wood in an 80/20 ratio (80& wood, 20% greenery).
@Treeboyltd2 ай бұрын
Underated wood chipper. I have one of these myself and it is extremely capable.. don’t underestimate what this machine can handle!!! 💪
@Treeboyltd2 ай бұрын
Extremely good pice of kit for a one man operation 👊
@Treeboyltd2 ай бұрын
Can come in very handy in the right environment 👍
@Treeboyltd2 ай бұрын
Great bit of kit !!
@JohnSmith-jt3bh2 ай бұрын
Junk, dry ass wood too he’s using and loved the 1 foot half round log at 1:25 he try’s making look look a full log. He had to hit 3 times
@alejandrozunino54282 ай бұрын
I bought the same one and I regret it. It is uncomfortable to get into a small van, it weighs a lot, and when it is loaded, it is not easy to turn, since the wheels do not turn. I will have to make a modification.
@christiankammer23792 ай бұрын
Came for a quick look on the cute splitter and staid for the relaxing music. Thanks. :)
@ForestMaster2 ай бұрын
Thanks for watching!
@oo7naughtyusmaximus9333 ай бұрын
Thank you for this......have a great day.
@waldemarpodsadny80293 ай бұрын
jaka cena
@ForestMaster3 ай бұрын
Witam, dziękuję za pytanie! Wszystkie nasze produkty i ceny są podane na naszej stronie internetowej www.forest-master.com :)
@Adventurefamily0073 ай бұрын
How much is machine? I am searching it
@ForestMaster3 ай бұрын
Hi there! The FM4DDE is currently on sale for £349.95 (including VAT) until Monday, July 22nd.
@tobybutler94933 ай бұрын
Now post a video how to check the oil level please.
@ForestMaster3 ай бұрын
Hi Toby, thanks for the suggestion! We'll definitely consider it for future content :)
@antonionavarro30713 ай бұрын
Please, tell us where can be found. Tks
@ForestMaster3 ай бұрын
Hi there! All of our products can be found on our website www.forest-master.com :)
@stevemullen36663 ай бұрын
Music timing is perfect
@Follow_thedopamine3 ай бұрын
When will this be available in the US??
@SteveHuntingdon3 ай бұрын
I ting you fine dassa rog spritta.
@satyavirsingh10243 ай бұрын
Is it available in India
@zoyaclark79613 ай бұрын
Today I did it myself, I am a 50 years old woman, thank you for the video.
@ForestMaster3 ай бұрын
That's fantastic! We're glad the video was helpful.
@MrGigbot3 ай бұрын
Salve, posseggo il biotrituratore e mi trovi bene, chiedo dove si trovano le lame di ricambio.
@ForestMaster3 ай бұрын
Grazie! Siamo lieti di sapere che sei soddisfatto del tuo biotrituratore. È possibile trovare le lame di ricambio sul sito Web www.forest-master.com
@MrGigbot3 ай бұрын
@@ForestMaster spedite anche in Italia 🇮🇹
@Smithcraft13 ай бұрын
This look like it's exactly what I need, but it's not available in the US!
@ForestMaster3 ай бұрын
Hi there, thanks for your comment! Regrettably, we don't have a distributor in the US. But, if you drop a line to our sales team at [email protected], we'd be happy to provide a shipping quote for you.
@gp41034 ай бұрын
Mine has been going great for 2 years now. I store it outdoors with a tarp over and keep the surfaces and bolts greased. Seems to be ok Splits beech, birch, cherry, ash, pine sycamore and a few other species. Bed is a bit short but suits my stove as I only takes 12" logs. Would happily buy again
@ForestMaster3 ай бұрын
Thanks for the comment! We're thrilled the FM5 is working well for you. Great storage tips too!
@samuelonthewall4 ай бұрын
You need a USA distributor.
@rolandhawken66284 ай бұрын
Brought one of these ,,very poor
@federalnoise4 ай бұрын
Is it Mickey mouse rubbish or even useable?
@rolandhawken66284 ай бұрын
@@federalnoise Useable but ,not for thick stuff or any logs with twisted grain it will just stall , remember theses things are dangerous cuck an old rug over the log when splitting they can fly apart and hit you ,and i mean hit , I wish I had bought a 15 ton
@darwinsfish4 ай бұрын
I’ve heard that the blades are inferior steel and blunt very quickly. It’s a great machine if you can get forged steel blades. See Loz Harrop’s channel where he shows you the poor quality of the blades.
@ForestMaster4 ай бұрын
Thanks for reaching out! We appreciate all feedback on our products, as it helps us continue to improve. We actually use forged steel blades in all our wood chippers for their strength and durability. That being said, we have listened to your feedback and are happy to announce that we now offer a wider variety of blade options for our wood chippers. If you'd like to explore these options further, feel free to get in touch with us directly. We'd be happy to chat and help you find the perfect blades for your needs!
@darwinsfish4 ай бұрын
Thanks for the quick reply, will definitely investigate your new options as the actual machine looks a powerful piece of kit.
@Bryan-1093 ай бұрын
@ForestMaster what kind of hat, with the earmuffs and face guard is that in the video?