Thanks 👍

hey mate i just got the ssg69 "sniper" rifle, been looking for aftermarket bolt systems and springs for it and cant find anything so far, have you got any experience with these gel blasters?

you should try airsoft the ammo holds up better

hi

I’m new to Airsoft, but delighted to learn that it is filled with terms like: “Breaking the Seal” “Pre-mature Ejacul..Engagement” “Short stroking”

I dont think its supposed to be firing in safe 😂

That's an awful amount of stress for a plastic mechbox

Do they make them in cnc

Am I on glue did you say an M150 with a 6:1 DSG with a 36k motor with a plastic gearbox. I have been building airsoft guns now for quite some time and have repaired some gearboxes builds like these. The gearbox either cracks or shears off around the cylinder head area.

Also how come a plastic gearbox I am a little confused I think should be cnc'd aluminum or at least good quality cast aluminum.

Okay so just starting this video I see a shs 12:1 with a DSG top gear mounted I know they don't make a set. The video says 6:1 DSG I'm thinking your gearbox would just commit Sudoku.

Don’t grind anything on the release side of the piston this is a really bad idea, you will brake piston and or gear. instead remove teeth from from the pick up side of the sector gear.

This dude wants to say premature ejaculation sooo bad lmao, great info still XD

brown O ring what should call?

Man this sounds like my school alarm that hasn’t been checked since 80s. Nice build though👍💪

Not fast enough haha

safe?...

Thats a selector plate 😆

Nice video and also very clearly and simply described fundamental problems that need to be thought about. Good work. :) But i have one question about that 1 piece cilinder. :) That mean you are corecting AoE just adding spacer between the piston and piston head? I dont think i should be able to instal a spacer correctly on cylinder head into this type of cilinder. :)) Also in case that you add spacer between piston head and piston i want to mention that i think that adding the spacer between the piston and piston head is bad idea if you using the stock GB. Adding spacer on cylinder head will decrease the stress of the GB. I am eaven using the cylinder head with front rubber spacer to decrease the stress. I am also adjusting the inner cylinder spacer. I drill its middle with same diameter drill bit as cylinders head rubber spacer hole is. Thats first thing to do cause you dont want the spacer inner hole to be smaller than that on the cylinder head is. Than I use a grinding head and grind the spacer from one side so that it is as thin as possible in the middle and gradually goes to the edge where it would be thickest and so that the piston stop area is provided only by the surrounding ring about half a cm wide, which also compensates for the loss of cylinder air content and much better concentrate air in the center of the cylinder head and its nozzle than if you use a flat piston head and a flat spacer. Totaly (as you say) recommend adjusting AoE with spacers from other cylinder heads cause they are harder and perfectly fills the cylinder diameter. nice video.

Blow your nose ffs!

Fxxking good education video

I’m have the issue running over 25 rps then FPS drop from 420 to 360 FPS always

What is the best setup for 40rps DSG system

Hey mate I love all your videos the information your willing to give up is priceless THANK YOU ...for a noob don't laugh but what does dsg rnd mean??

What if the nozzle doesn’t move far enough to the back until it blocks the gel balls moving upwards to the top of the t-piece?

Can't believe people spend and waste more time on these Chinese toys as if its the real thing 😄

Anyone know if anyone has installed these gears and motor in a kris vector v2 ?

You in Victoria?

is it gearbox of this J11 same with gearbox V3 of AEG?

Rps?

???

May I know where get that battery box from?

I Like it

Which spring do you recommend for stock gears?

Your own explanation shows why you should remove from the release side of the sector gear. Removing from the release side will let go of the piston earlier, therefore the piston will return earlier giving more time before the tappet cycle starts again.

I feel for you man. Hope you are well. Stupid liberal anti gun cucks.

Looks like the rail is like not straight xd

What voltage battery were you using?

the holy grail of blaster tech videos! thanks for your countless hours under the gearbox to provide us this info 👍

Lol missfeed

they call it “Wells” because you’re inevitably throwing your money into a hole 🕳 😒 i’ve learnt this the hard way with my honey badger/retro box combo. p.s great video very informative especially the tappet timing tips 👍

17:35 His super smart detailed sector gear cheat sheet beginning 😉

Only just come across your channel and got to give you 2 thumbs up, learnt a bit from 2 vids, Now I got to strip and recheck everything on the acr.

I swear you were going to say premature ejaculation, but kept correcting yourself. Nice video though, very informative.

Im searching handguard for jm12 ak74u. Any blasterian know what handguard suitable. Strikeforce polymer handguard i dont know can fit or not

Helped alot thanks rowan

Why do i have with 11.1V Lipo, 18:1 gearset and 18k motor (standard G&G) 33rps? in theorie i would need a motor with about 37k @11.1V

Do you have a Facebook page

Now I regret buying my Kriss Vector V2 😭...I should have gone with other blasters that are upgrade friendly. When I bought Kriss Vector V2 I thought its the coolest blaster with all the accessories but now realized it was a mistake buying it since it will have issues in the long run and will die anytime sooner or later 😭

Loving this video, and I’m yet at min 10!