can this happen to a singer?

I haven't used my machine in a few years. It work. Thanks

Thank you! Now I know what to oil. Did it wrong the entire time😂

Hi, just wondering if you could help with what might be a common problem with an easy fix. When I go to put the bobbin in and thread it for embroidery, my thread keeps falling out of the little fork underneath, as I am putting it into the embroidery clip. Is that a bob intention issue? Is there a fix that I could do myself?

Thank you Sir!! What a revelation, 45 years of sewing & I had NO IDEA about this😇

I will try this! tanks

How to move a bsr on bernina 830

How to unlock a srirchbregulato How to move a stitch regulator

Thank you soo much very helpful

Very very good video. I just got one second hand. Now I can clean and oil it. I must get that vacuum attachment! Thank you.!

On and off switch on machine

Thank you so much for all your videos. I would be going to the shop every five minutes. This machine is great but it sure is finicky and sometimes hard to deal with. I have an 880+ I love love love it. I don’t love love all the maintenance for it but appreciate you.

My machine is on but the foot pedal which makes a buzzing sound won’t activate the needle

Thank you so much!

Thank you. My Bernina shop closed last year. This is so helpful.

Is this due to a bad capacitor on the power board? Or is there a memory battery that looses charge, and needs to be charged back up? I have seen this with nv ram and cmos batteries on computer mother boards. If computer is not used for quite sometime the battery on the mother board can drain.

Christopher was able to correctly diagnose the problem with our B740 (failing CPU board) from just a brief description. Very impressive, and clearly based on vast experience and skills. I'd warmly recommend Christofer for any repairs or service on Bernina machines, I'm sure you'd be in safe hands.

Aurora 440 QE after about 5 years rebooted within 10 minutes. Thanks so much!

Do you recommend buying a used 830 today that has 8 million stitches? Should I not consider a used bernina?

Thank you, thank you, thank you!

Thanks for this but it didn't work. The screen came on for a brief second and then disappeared. What's the next step? I guess a service?

Thank you so much for this invaluable video. I am up and sewing after about 40 minutes too. The Bernina Activa240,machine was gifted to me and has been in a storage facility for more than 12 years. I though it was going to need to be seen by an technician.

Thank you for your advice, my bernina 220 did turn on after only a few minutes. I has no idea this could happen.

I did this on my Brother machine that hasn’t worked in 3 years. I figured I’d try your trick before throwing it away and it turned back on. Thank you so much!!

I am so thankful I found this video! Thank you!!!!!

30 minutes after turning on power... voila, my wife's B350 finally powers up! You are heroes, Bernina Boys, and your advice was invaluable!

Wouldn't pressurized air push more lint and dirt further into the machine as compared to s vacuum??

Where do I get a screwdriver that will fit the star shaped screw?

This worked for my Brother PE150! Shocked this actually worked!

I hadto remove the screw on the needle post to get mine on because my old Bernina Record does not have the clearance shown in the video.

Thank you for sharing :) WHY did you blow innvard? Now you have send all the dirt insiden the machine! If you could blow fron below and upward the machine would be cleaner since moste of the dirt blows out from the top.

my threader will not thread my needle? HELP

Thank you for that information. I have 2 questions. Where is the sensor? How do you get the sensor out to clean it?

I so appreciate this video. I was aware before I started that I could ruin my machine: but decided to take the challenge. The last step was difficult, but when everything went into place, I was so happy. Thank you.

Thanks, you made it easy for me to understand and thanks for getting straight to it unlike some other videos that talk forever without ever getting to the point of it. Thanks again

Hello! I just got a used (barely) B350 SE, so THANK YOU for your videos! Do you know if there is a way to make the numbers on the display brighter? Mine hardly show at all.

Thank you❤❤❤❤❤

Will this work on a 780?

I would love if you could do it with a closer showing of where the notch goes. I can't seem to figure it out.

Thank you so much for this video! This was my issue. Making Christmas presents, and machine is not working. Stress... Thank you!!!!!!!

Did you show how to remove the sensor?

Thank you so much. I was at wit's end, and this tutorial saved the day. Thank you.

I asked for 880

Worked for a while until it didn’t

PHEW! Major save! Thank you for the explanation too. I haven't used it for several months. Since the tune up! Great information. I'm good to go. The cost of tune up has risen to the point I can't afford just now. Thanks again.

Thank you so much for this!! I was just gifted a 440 that’s practically brand new (only 40 hours total, 1 hour of work!!!). I was very nervous when I plugged it in and nothing happened. After an hour I was on the phone with the service department where it was purchased and it fired up. It took 62 minutes.

My new one takes like 2 minutes to turn on it’s a 570

Love it!

Thank you so much for sharing this information! My Bernina 240 turned on after 15 minutes!!! Thanks a lot!!!!

I have a 180 that will not turn on. Wil this work for it