U think itll rust too bad? I live in canada so theres a lot of snow

Vacuum actuator setup please.

Now I just want a system that enables this at the touch of a button. Totally blanks off the actual exhaust when you press the button, and sends EVERYTHING through the cutout.

How much is it

Any updates on an electrical one? I love the manual set up though. My truck is high enough to get under and switch out when I want, but having a switch button would be all the better!! Too many bad reviews of exhaust leaks and rattling.. Hence I think I'm going to go with this manual one 💪🏽

That's a very good and useful idea ! But I think with two electric motors that could seal very tight, you would have the same outcome with no turbulence. One inside the pipe and the other one underneath. I think this would work!

can you still buy these. I want one. these would be perfect because I don't see those dumb electric ones lasting around here in Saskatchewan

I bought one of these cutouts and it leaks right through the street plate making my miata sound like crap as pressure escapes through the seal. I’m gonna try putting lock nuts on the top of the 4 bolts to try and seat the plate harder. I doubt if it will do anything. I give this cut out a 2/5 mainly of those reasons and because they only make them in 3inch diameter now due to production cost. I bought adapters to fit my 2.25 exhaust it’s works it’s just since I ride so low even with stock suspension i bottom out on the cutout because of the pipe having to be a bit bigger. If you drive a truck then I guess this is perfect for you , if drive anything that hugs the ground I would not recommend this product! (And yes I tried DIY strapping my exhaust)

If you were to add an electrical open/close system like all other valve cutouts then yea great … As is its impossible to use on a daily basis of as and when you want it activated …

Dear cut out crew I'm sorry to be bothering you like this but I've gone through every channel possible all American Muscle LMR late model restoration I talked to almost everybody you can imagine and when you first speak to someone that get you all excited that they may be willing or may be able to help I've tried to Make A Wish Foundation what they say that my brothers too old my brother is 49 and it's been diagnosed with a rare genetic disorder that makes his blood mutate and causes him a lot of health problems he's been a Mustang on almost to the whole life in his last wishes that he owns one more one last time so the church got together and got him a 2004 Mustang GT all they could do we go to a relatively small Church we wanted to do a coyote swap and give it just a little muscle nothing major maybe a 2012 coyote gen 3 with an automatic transmission in a air ride for adjustable suspension he's having a lot of trouble getting in and out of cars now and I'm afraid wrong timeline that's not going to be doable when we first started this project two years ago everyone Farris hope and he had so much out of but now I didn't disbelieve and we don't know who else to talk to or who else to turn to for help it's just one man's dream the only one of the best cars ever made a Mustang candy apple red what's a nice sound in motor stage 2 cams when do someone's come out with a supercharger that you'll actually tune I think it's Paxton and it has three different setups which mic should I do for someone we just want to enjoy that ride they won't see attract or strip he just wants to go to car shows because the owner of the Mustang one last time if there's any way you could help us or anyone you know that could help us we would greatly appreciate it we're out of options at this time we know Turn 5 is a big player in American Muscle and we really had hopes for them but was that they came back with was it was just not a project that they would be interested in what's killed his spirit and I think he's giving up but I'm not willing to if you can help us in any way please do you can contact me at 334-2221 2964 that's my cell phone or my email [email protected] help us

How long do you take to deliver?! I'm very interested!

ordered a pair yesterday for my barracuda, genius design for efficient cutouts. thanks kevin

Nice. Way better!

Any videos with it installed?

This is a real cut out.

Now figure out how to make it push button from inside the car please

No other sizes???

Muy buena idea 👏👏👏

This is hands down the best part in the cutout category. Great attention to detail! Sure it's a bit of effort, but seems like it checks off everything I need... the only thing I can think of is that it would be fantastic to have dzeus fasteners or something in the flange to be able to swap caps faster and easier, and that would put almost every naysayer in here to rest. I have zero interest in installing a cutout that's going to freeze up or not work in 6 months or less.

Just an opinion

Wont have eddies and turbulance quz if the valve is closed its a high pressure area... so it would choose the easiest path.....

Next generation = electric plz

Wouldn't this lead to carbon monoxide poisoning in the cabin?

Good product but I can't see myself getting under my car every time that I want sound.

Ojala pronto llegue a México este cut out

Thinking bout adding one of these on my Audi. Do the inserts vibrate or rattle on the inside?

grow up

what if you use 2 electronic cutouts per original exhaust pipe and wired them to be one open and one closed.

I have a 92 Foxbody Mustang. How to send us one?

They need to advertise better. A dope product no one has ever heard of.

Awesome good to know

Wow, that sounds like a great idea.

Bad ass!

Where can I order one of these!?

Here is a F150 Eco-Boost with the Cuthroat Exhaust Cutout kzbin.info/www/bejne/Z5_FhaaObZylebc It runs great and the sound from the exhaust, turbo spooling etc. is awesome!

I agree that this is the best cutout exhaust for the exhaust perfectionist. But the most inconvenience way to switch from cutout to non cutout. I don't mind sacrificing a little turbulence for convenience and immediate response. Great product for the person who doesn't mind making time to crawl underneath the car to remove or reinstall the cutout for perfect cutout. Sucks for lazy people like me who wants to flip a switch for loud exhaust

If it cost more than the first one he held fuck that

This is stupid just put the butterfly valve flap on the straight side and bam perfect.

Does it vibrate due to the two piece setup? So when I'm throttling will it vibrate like a can or be solid ?

sigh...yeah, I guess. If you want to make noise sometimes and you're worried about every last horsepower on a dyno when your caped up, sure, this is a great idea and a fine-looking product. In reality though, your catalytic converter and/or muffler(s) cause way more back pressure or turbulence than a standard blocked off Y-pipe, and even then, unless your engine is significantly modified or your OEM did a really bad job designing your exhaust system, factory exhaust isn't restrictive enough for you to notice on an factory engine in most cases, particularly with modern cars. I have an electric cutout on my (basically stock) Toyota Celica and, other than the noise, it makes no difference opened or closed and my car has the factory cat, two aftermarket resonators and a flow master muffler.

Great product. I own a Turbo 1.4L. So 3" is a bit much. Would you ever make smaller versions of these cutouts. say a 2.25" or 2.5"? That way there isn't a huge difference in pipe diameter when switching back to street.

If y'all figure out how to do one of these that's vacuum actuated, oh boy... sign me up!

An electric one would be sick

I have a resonator delete on my car (2011 MazdaSpeed 3) and if i was to buy this would it be safe to place it on the resonator delete pipe? regarding backpressure etc.

I was looking for an exhaust cut out that could keep up in the long run with no air flow restriction. I think I found just what I wanted. I was looking at electric cutout's but the motors always end up going bad or they start leaking. I also looked at the manual ones, but the y pipe creates some restriction. This is way better than any other ones I've seen. Definitely will be ordering from you.! Now I just need to figure out how I'm going to fit it between my exhaust manifold and the cats. I've been wanting to go open headers without the commitment. I have a daily driven 345 challenger R/T, and I think I'm going to be winning some exhaust competitions once installed.! Thank You and major props on concept.!

Here is a set of Cuthroat Exhaust Cutouts installed on a Twin turbocharged Dodge Challenger. kzbin.info/www/bejne/qamXpGiQfr9_b8k

The Cuthroat Exhaust Cutout is available with free shipping to the continental U.S. at cuthroatcutout.com

Make a video of it on a car. Only way to impress people.

Please go to cuthroatcutout.com for product and ordering information.

What about us guys with trucks? I'd like to have a cutout that I can control from the inside of my cab, that I can turn on and off when I want. Would that be something you guys can create? I really like your design and makes perfect sense, but I would like to be able to switch it on and off electronically