Since this video I've gotten a couple of more A1s and the memory card just failed in another one. The PNYs are working fine but this time I decided to try a "High Endurance" card. I will let you know how it goes. geni.us/SanDiskEnduranceSDCard

The voice changer is not available on Amazon

“It’s probably nothing. Move along”

*even he was weirded tf out*

Did you try formatting through Windows Disk Management instead of through Explorer?

It would be better to hear the sounds they makes

Exactly the tests I love. Thank you!

i just printed a sculpture and noticed this weird thing happening only to the flat circular base that I printed at a slight angle to save space, everything else came out perfeclty and I was wondering why it happened in such an oddly consistent way , thank you for letting us know about this!

These are the Memory Cards I used: geni.us/PNY64GBMicroSD Fat32 Format program shown: ridgecrop.co.uk/index.htm?guif... I had problems with the SD cards included with the first two Bambu printers I bought. But replacing them was harder than I thought. In this video I show you how to format a large memory card for Fat32 so you can use it with your Bambu Labs printer. This will help if you have a printer that just randomly stops, or if you get the error “The Micro SD card sector data is damaged. Please use the SD card repair tool to repair or format it. If it still cannot be identified, please replace the Micro SD card.” Or if you just want a bigger card. My Current Top Printer Choices: Best Small Format Multicolor Printer: geni.us/BestSmallPrinter Best Standard Format Multicolor Printer: geni.us/BestStandardPrinter Best Large Format Multicolor Printer: geni.us/BestLargePrinter My Favorite PLA: geni.us/FavoritePLA My Favorite PETG: geni.us/BlackPETG Older Links: Best Small Form Factor Resin Printer: geni.us/FavoriteSmallResin Best Small Form Factor Resin Printer: geni.us/FavoriteLargeResin Best Budget Filament Printer: geni.us/BestBudgetPrinter Simply the Best Filament Printer: geni.us/BestFilamentPrinter Best Wash and Cure Station: geni.us/BestWashAndCure My Favorite Resin: geni.us/FavoriteResin Just want to support the channel at no cost to you? You can with these links: Prusa Store: geni.us/Prusa Phrozen Store: geni.us/PhrozenStore Elegoo Store: geni.us/ElegooStore Sovol Store: geni.us/Sovol3DStore Epax3D Store: geni.us/Epax3DStore Banggood: bit.ly/DR101-Banggood Amazon: geni.us/EGAmzCoffee If this was helpful consider buying me a coffee so I can make more videos: www.buymeacoffee.com/TrueElit... The FULL Disclaimer Song: • Disclaimer ************************************************** Subscribe and be a EliteGeek! : kzbin.info... Enjoy & remember to like and subscribe! Elite Geek is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you. Thank you for supporting Elite Geek by using these links. Testing all this hardware is quite expensive.

i have some problem with this feature... somehow the new model spawns higher (or the supports copy itself in a lower level) than the opriginal model, so my supports never match even when the model is in the exact original space position

Where link for $15 mic

Thank you

Best of alllll: WILLIAMS!!! Entirely accurate.

Is there an internal battery when I put the batterys in it doesn't talk but powers on after all 4 are in

They are getting a King Size Crunch bar and bag of Gummy Nerds today as a thanks for their generosity today.

What great kids...some are still raised right

"We donated. We're good people!" That got me, lol

It was me. I took all of the candy. I'd do it again.

Lol, thanks for sharing. 👍🏻👍🏻

Where could I get this for Christmas?

I always print boxes and flat objects directly on the base plate without any support! It is very easy with a flex plate.

Thank you from heart! But my Anycubic M5s say the pixel size is 17x24 or something like that. I think i will have different setting depending from the X and Y orientation?

Can you help? What is a good print angle for my printer? Elegoo saturn 4 ultra

PUEDES ACTUALIZAR EL LINK? YA NO ESTA LA INFORMACION.

That page doesn't exist anymore, I can't find firmware ANYWHERE. I got a QIDI Tech and it's like their website forgot they made SLA printers because there's only firmware for Filament. It's completely retarded I can't use my printer anymore because there's no support for it only 3 years after release.

How do you remove an old screen protector that is stuck on?

If you think you know regret, think again. Just remember the stormptrooper who realized: "Those WERE the droids I was looking for!"

Coool.. GOing to try it right now :) Thanks for the guide

Dude!!!!!! Thank you from Kurpa Minis!!! I can't count how many hours I've wasted starting from scratch. You made my week!

one more question is the time stay on weather you are using the box or not would it be safe for it to be on all the time will you advice to on plug it while not in use again thanks i will subscribe

Hi again thank you i just try putting the box together and i put the rubber band were they should go and walla it work thanks again you are my hero lol

Hi i need help puting this together i did put it together but it comes apart the stretch band that it came with should i use them so it stay together thank so much for this video

Do you know how to fix the rubber on top of the eyes when it turn white?

I bought one of the last of these and it’s been awesome. Pondering changing the screen, if the board is the later one it can be firmware upgraded for mono screen apparently.

i just bought it

Thank you for posting this. The straps can be removed by patiently disassembling the three helmet sections, then removing the screws from the interior face section. If takes patience, but it’s not difficult.

Thank you for posting this. It’s very helpful. 👍

the flat foreward faces of a gun

Since pixels are seldom actually square, I assume I'd need to do this calculation for both axis to get perfect prints on all sides, correct?

what acout the scout trooper helmet

this doesnt work anymore

My Favourite Star Wars

Wow- thanks for wreaking that.

It looks like shit

sorry didn't get where I find the pixel width of the printer...mine is m3 max..thank you, very interesting video

No sound? Lame as heck.

Nice one, thanks

over 2 years a go, bought brand new, did a test, then started my first large print - it pushed it overfilled and trashed the screen on the second print, has sat there since. INSANE it is not glass - over 100 bucks to replace, and cant even off their own website? Any glass replacements?

Thanks.

Tried it out today with my Anycubic @0.05mm: What can I say.. Nice Theory, Absolute bullsh!t in reality. Never had such extreme steps between the layers.