This didn't work for me controlling an old school JL 500/1 (Slash series), where the JL knob RBC-1 is called for to control the bass boost function. I did find another set of DIY instructions that provided somewhat opposite wiring than described in this video: The green/black wires go to the single pin where this vid shows the yellow/red. Let's call it pin 3, if it is the one on the far right when they are all facing up. Then the Yellow/Red wires are connected/bridged between pins 1 and 2. This worked perfectly for me and I hope my experience helps someone else.

Night and day. Great review

شرح جميل هل مازال يعمل

Good video, did the new hinges press the top of the door against the header weather stripping?

I've tried this with my JL Audio M400/4, but it doesn't seem to be working at all. The amp just acts as if the 10k potentiometer isn't plugged in. Do you think that amp needs a potentiometer with higher than 10k?

Excellent!

It seems like the weather stripping around the perimeter of the door wasn't installed as tightly as it should have been. When I install molding, even pushing the door in, the flap should still be in contact with the door. I like these hinges though, very cool idea.

Hi gentlemen, I own the same model and get exactly same mark levinson amplifier noise in the trunk, how did you fix that finally, thanks!

Very helpful video ! I’m past cutting the black casing, the lever is unlocked now, but the door is still stuck closed. Should I soak/clean the area? I’ve already tried forcing it open while some one pulls on the trunk.

Thanks for making this. Helpful right now while I sling shop lol :D

Brilliant

Nice 👍 keep it going ❤❤❤❤🎉

Great video! From watching several vids..this one is Great...plus I assume the numbering system on the hinges still apply..1 at the bottom..then 2..then 3 as you go up.. Again..Great info!

Thanks for sharing!

Puedes darnos las medidas y como los aseguraste para que no se mueva de su lugar y te quedó perfecta la medida qué tamaño es el orificio o agujero 🕳️ para el sub

Any rubbing after putting spacers on?

Any idea if the actuator can be replaced from inside the vehicle if the unit is not working, rather than go through all the trouble of using the camera and dremel?

Greg, you have a special gift. I have been blessed to know you and have experienced true healing because of your kindness & grace. You are an Earth Angel. 😇 Thank you for being here.

Druveway full of foreign cars. What a shame.

This is great idea, was ready to drill the actuator full of holes, but cutting the cover off sounds more effective, thank you

It is full now? Yes, how long it took?

Thanks for sharing! I went with a very similar set up on a Mossberg, with the Magpul receiver ring and paraclip, but looped through the SGA stock on the opposite/ejection port side instead of the QD being in my cheek and allowing the gun to flop more when in admin. I would definitely recommend trying the stock attachment on the other side, it keeps it tighter to the body when slung and out of the way when shooting. Cheers!

Hi, I've watched your other video for the KSP wheel spacers and didn't realized that its a Chinese made also (the same as the Bonoss). Which wheel spacers do you preferred between Bonoss and KSP? The features of Bonoss are well explained like the Active Cooling and the Test Certifications with the 10 years warranty are really solidify their competency

I did everything exactly as specified in the video. And it still won’t open? Any help then? Cut into the plastic box, manually unlocked, and flipped the switch to opening position, but nothing happened. Any help would be greatly appreciated

Thank you for your video!! It saved me lots of time trying to figure out how I was going to pump it with out being a yoga instructor. (I have no flexibility at all). There is no explanation in rotating the pump handle in the instruction manual. Great job!!!

Good thinking! I'm looking at the Magpul slings and was wondering/worried about how the Paraclip works with standard shape swivels? Would you recommend the one you used, or use a shape closer to your reciever mount? Thanks.

Can I use this on a BMW ,?

Actually NO. It doesn’t. Because you didn’t explain what button you hit and how (tap, hold?)

Any cons you found out so far ? I actually like your 1.5 setup

nice

If I could add, I noticed on the other door, your operator arm is standing straight up. It should have an angle to it, which would then give it a push at the top of the door to prevent airflow.

'Y' is that? 😂

Lets hear some revs. Wanted to hear what that monster really sounds like

Thank you so much for posting this! I could mot figure out the handle store situation. They sure dont make it obvious!!!!!

Thanks brother, your piece of the puzzle got me where I needed to go! Hatch is open!

Hi, what is the wheel name or model? Looks great. Do you have any online link?

Looks like a good solution. 👍 I think I just need to pick up a 2nd sling and have 1 on each platform. Better than having multiple attachment methods on 1 sling.

Did you have to roll the fenders to fit the 20”?

This is a load of crap . Don’t buy it

Nice Bike sounds great.👌🇳🇱

Did it jump start the car

Nice job

It's a great video. Thanks 👌

It looks really nice. I'd like to build something similar. Do you happen to remember the dimensions of your cuts?

Thx

Dude! You’re the man! I couldn’t figure out the handle. @Husqvarna should include your video with every purchase! 😊

Good Sound ? Like Bass ? And is there an App to Set it up

Thank you!!!!